HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

Similar Questions

• Satellite P20-761: Windows will not start - it loads agp.sys then freezes

  When I pass my laptop it starts with the Toshiba logo as if commissioning, but then the screen goes black with the following message:

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware of software change might have caused this... etc etc.

  Then I have a list of options to choose from:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good known Configuration
  Start windows normally

  If I have the choice between the options of safe mode the screen goes through a list of files ending with: multi (0) disk (0) partition (1) \WINDOWS\System32\DRIVE.sys, then freezes.

  If I have the choice between the last two options simply, the screen goes black and nothing happens.

  Of I'm desperate is not to lose all the data that I have accumulated on the laptop. Stupid me not a not bother with backups.

  Discs only can I find supplied with the laptop are 'tools and utilities' and 'product recovery dvd - rom '. Seeing that I am not a technical interest, I'm afraid to try just in case I lose all my most important files.

  Help, please! Answers must be plain English as like I said I'm not really technical. Thank you. I cross my fingers.

  Sounds like something wrong with the graphics card or with the graphics driver.

  I think that you have no other choice than to use the Toshiba Recovery CD and attempt to reinstall the OS. I hope that the graphics card doesn t malfunctions.

  It's very sad, because in this case, you will lose the data on the HARD drive.
  Optionally, you can remove the HARD drive and then to connect to little via the USB port on the other computer, then you can make a backup of your data.

• BlackBerry smartphones will not let me connect my phone then freezes!

  I downloaded the calculator pro points weight watchers on my curve 8520 yesterday that my friend recommended and it freezes as soon as u click on connect! When I finally my phone back, he said that it was not meet and terminated can help more to get this to work

  Hello

  Start by doing a battery pull. Then the device is turned on, remove the battery for 15-30 seconds, and then wait for it to restart. Who help me?

  If not, then try to remove the app and reinstall it. If this does not help, I would say to contact the developer of helper. There should be support of addresses registered under the list in the App World of products. They may be able to easily resolve things, or they may be able to use your information to understand what is causing the problem and then issues an upgrade (if necessary).

  Good luck!

• My printer will not remove the last print job

  My printer will not remove the last print job and does not meet what I already found on internet support

  Hello

  If you haven't done so already, try the following.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• How redir to C:\ TEMP > unwanted dir dir is empty but will not remove. I can't delete the dir eighter. Any ideas?

  How rmdir C:\ TEMP > unwanted dir dir is empty but will not remove. I can't delete the dir eighter. Any ideas?

  Hello Ssmith331,

  Welcome to the Microsoft Answers Community!

  Try adding a/s in front of the path of the directory you want to delete. For example: rmdir /s C:\Temp\Test

  For more information about the Rmdir command, follow the link below:

  RMDIR

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  Hello

  in what format save you your file? If it's a jpg file, then the text is compressed and unfortunately PS is telling things as they are. Even if you could change the text before you save, after having been saved in jpg format, the text is merged and is no longer editable.

  A good solution is to save the files as PSD files, photoshop files. In this case, all layers are saved uncompressed and so your text will appear in its own layer in photoshop. All you need to do in this case to change it is the result of a three-step procedure

  (1) select the right layer

  (2) take the text tool in the tools bar

  (3) mark and change your text

  So the crucial question is: in what format you save your file?

• Installer to update InDesign CC which will not remove earlier versions of Indesign by updating the CC version?

  I XmPie executed on an older version (series # separated) and it cannot be upgraded for several reasons, but when I choose to upgrade it will remove all other versions. Is there an update Indesign CC installer which will not remove earlier versions of Indesign by updating the CC version?

  Hi Daniel,.

  You can update to newer versions; by directly the same download from the link below:

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  * Please read very important before you download instructions.

  Kind regards

  Sheena

• iPhone will not be displayed in the finder

  I'm trying to move some of the photos from my phone to a file on my computer and my phone will not be displayed in the tab "currencies" in the finder. It's an iPhone 6 and it is connected through the USB port. I know this isn't an error connection because when I plug it in it costs and is trying to import my photos in the section 'photos' from my computer. I went into the settings in the finder and all turned on and it will not always be displayed. Why is this?

  Because Apple has decided that OS X is smarter than you and me. They removed this option on the latest versions of Mac OS X (my devices do not appear more, grrrr...). Try instead to use Image Capture and import or remove photos from there.

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• My HP Photosmart C4100Series printer will not remove a previously requested printing package, and is now stop printing of other things. How to rectify it please?

  I was printing a document from page 52, and then discovered that I was not necessary. After printing, the printer will not remove the print request, therefore it prevents me to print other documents. How can I correct this?
  I turned off the printer, but nothing helped.

  Thank you for your help. Very useful, but I had already found the doctor of scan HP printer on the internet and it was so simple to use and also corrected the fault in a few seconds.

  However, once more, I thank very you much.

• Why uninstall Norton 360 will not be installed at the factory? I'm running a new antivirus

  Why uninstall Norton 360 will not be installed at the factory?  I'm running a new antivirus

  It starts to uninstall (the small circle thang) then stops

  I know that with AVG, you must visit the AVG site to install an uninstall program to remove the program... seems absurd, I know, but that's what's happening with AVG... I don't know if something similar should be done with Norton... but you should be able to disable it... right click that the Norton icon in the tray and you should see options, which will be disable IT are other ways, I don't know, but I haven't used Norton.

• HP Envy 7640: HP Envy 7640 will not print photos from the photo tray

  I bought a HP Envy 7640 today, 11/05/2016.  It will NOT print photos from the photo tray.   The printer has paper in all trays, but keep taking 8 1/2 x 11 paper rather than photo paper.  I use the default application for the display of pictures (Microsoft Office 2010) and have tried selecting both the 4x6in of the index card. and sizes of 4 x 6/10 x 15 cm.  The end result is the same, an image printed in the middle of the plain paper.  I searched the forums and found that two related threads.  Given that I just install the printer today, I figure there will be newer drivers in the last hour, so I finished downloading "printing HP and Scan doctor."  He finds a "Match of Port issue" and that fixed it, but when I printed another picture, he was still on plain paper.  If I remove the paper and leave only in photo paper, the printer throws a fit and said that it is out of paper.  Any ideas?  I'm not a newbie, but in more than 20 years of use of HP products, this is the first time that I had to fill out a problem for a Board of Directors.  (And with the instant the ink program, it starts to accumulate the number of my printing without a single success.)

  RESOLVED - photo, once you select the printer & paper, you must go into OPTIONS, then the properties of the printer, then go to the paper/quality tab, then the paper Source and select manually the specific bac (bac/Photo main tray).  Sheesh, should we not automatic as soon as you select the paper size?

• How to locate a file that is displayed on my desk to remove it at a command prompt indicates that this file "is no longer in C:\Users\owner\desktop. It is in plain site, but will not remove.

  How can I delete a file that sits on my desk and then will not delete but a prompt indicates that this file "is no longer in C:\Users\owner\desktop. It is in plain site, but will not remove.

  Hi SMingalone

   

  We can perform the disk cleanup and disk defragmentation to remove extra files on the hard drive. Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  http://Windows.Microsoft.com/en-us/Windows7/what-is-disk-defragmentation

  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

   

  You can also check the below link for more assistance and control.

  http://Windows.Microsoft.com/en-us/Windows7/strategies-for-freeing-disk-space

   

  I hope this helps.

• A real player files will not remove!

  Hey,.

  I downloaded a video and when I try to delelte, he goes to regular recycling window but it used to delelte, it is said of recycling for a long time and will not remove it, it cannot be moved, is doing the same thing... How can I get rid of this video!

  Thank you

  Jare4evr

  Windows Explorer does not always detect if a file is deleted outside of it
  (he tries too). Press F5 in the folder.
   
  Try this program
  http://ccollomb.free.fr/Unlocker/
   
  If the name (maximum 256 characters) and the path (max 260 characters) of the file is greater
  that 260 use this command syntax (note the--------?------added at the beginning of the)
  path that disables controls legal filename).
   
  del "\\?\c:\some.ext".
   
  --
  ..
  --
  "Jare4evr" wrote in message news: 95e24f24-ca68-4f67-8968-181c11a0f84d...
  > I did it and it did nothing in addition to move to the next line down, don't
  > error, but the file did not go either
   
   

• Spot remover tool will not remove all stains of dirt is possible this tool can be accidentally turned off?

  Spot remover tool will not remove all stains of dirt is possible this tool can be accidentally turned off?

  It is not clear to me if you understand how this tool works. It does not automatically remove tasks, you must open the tool and click the points you want to delete. To Heal I usually put 100% opacity for Clone usually not more than 90%.