do not update for 32-bit vista sp1

Similar Questions

• Whenever my laptop downloads the updates for my Edition Vista Home premium 64-bit, internet explore refuses to work until I have to use the system restore. He continues to be over and over again. now, my windows live messenger does not connect too.

  the error code for the windows live messenger is 80072efd

  Hello

  To add to the fine advice of Divya:

  More details here:

  Try this, as it's the same for SP1 and SP2
  http://www.walkernews.NET/2009/05/14/how-to-fix-Windows-Update-error-80072efd-in-Vista-SP1/

  and here:

  http://trevinchow.com/blog/2006/08/09/Windows-Update-and-Error-0x80072EFD/
  And here

  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

  How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

  Clean boot tried tried reboot fix he said componet needs to be repaired

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. when (date about) don't you buy the computer?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  5 are ALL the following updates listed in installed updates (not update history)? [1]

  (a) KB2705219, KB2712808, KB2744842 [KB2722913 or KB2719177 or KB2699988], KB2731847 [or KB2718523] and maybe KB2736233;

  (b) KB2698365, KB2691442, KB2655992 & KB2719985 [or maybe KB2721691];

  (c) KB2685939 and possibly KB2686833.

  (d) KB2658846, KB2659,262, KB2660649,562, KB2688338 & KB2690533 KB2676;

  (e) KB2393802 KB2644615, KB2633171, and especially KB971029.

  6. If Windows Vista Service Pack 2 is listed in the installed updates, when (the exact date) he was installed according to the history of the update (this time)? [2]

  7A. is the 7 Version of Java Update 7 (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://java.com/en/download/installed.jsp

  7 b. v11.4.402.278 is Adobe Flash Player (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://www.adobe.com/software/flash/about/7. Is Firefox, Chrome or any other alternative browser installed?

  8 is Firefox or another alternative browser installed in addition to Chrome?

  9 have you ever had the opportunity to do a repair installation or a clean installation of Windows?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?

  ==================================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] start | Control Panel | Windows Update | View the update history (in the left menu)

• Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but he is not giving facility haven't faced error I tried to do one by one, but do not install it

  Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it

  Hi HazemRagab,

  Failed to verify who has had updates to install. Follow these steps:

  Start, all programs, windows update, view the update history

  Follow the steps in the article.

  http://support.Microsoft.com/kb/976982

  Reference: http://support.microsoft.com/kb/2545723

• Updates for 32-bit system continually fail

  Original title: update windows 32 bit dor

  updates for 32-bit system continually fail.  My system is 64-bit

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Firefox will not allow the module because "do not update for Firefox 29,0" even on update modules.

  I recently newly installed firefox 29.0.1 on my Android phone. Several modules that work very well on my laptop with Firefox 29,0 claim to be 'not updated for Firefox 29,0"

  for 'Reporter compatibility add-on' and the 'Greasemonkey' add-on, the site was actually a message in red under a gray button 'add to Firefox' who says 'not updated for Firefox 29.0 ".

  For the add-on "Leechblock", the site allows me to download, but after downloading a message saying "Leechblock could not be installed because it is not compatible with Firefox 29.0.1.

  All these modules work fine on my computer, and the support for them sites claim that they have been updated, so I'm at a loss as to why they do not work.

  On the view of the Office of addons.mozilla.org , there a version information section that can be extended if you click on it. For example https://addons.mozilla.org/en-US/android/addon/stylish/

  > Works with Firefox for Android 14.0 - 32.0, Firefox 4.0 and later, SeaMonkey 2.1 and later, Thunderbird 5.0 and later
  

  If the extension does not Firefox for Android in its version information section, it is not compatible.

• Is the free update for Windows7 from Vista still available?

  My computer has been down for 2 years. I finally had the time to work again. I remember it being a free update for users of Vista to Windows7. And I heard that they were doing so again because they'll update XP. Where can I get this download?

  Sorry - no, the free upgrade offer is over.

  You can purchase Windows 7 here (or at a local store):

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  I heard that if you buy Vista you get a copy of Windows 7 free
  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010.

  How to install Windows 7:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

• where can I download center solutions HP for 32-bit vista and the deskjet all in a f 2180

  Hello

  where can I download center solutions HP for 32-bit vista and the deskjet all in a f 2180

  Hi dredgard

  You need to download the driver from the link below and the full features software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3177562

• Imported the Parallels VM, now I get "BusLogic SCSI adapter is not supported for 64-bit customers."

  I have a virtual machine 64-bit Fedora 16 that I use in Parallels Desktop.  During my first installation of VMWare Fusion 5, I had the opportunity to import this VM.  I did that, but when I boot, the virtual machine is suspended.  I went to the configuration of the virtual machine in VMWare and fixed a few things than the failed import.  Now I when I start the VM, I get this dialog box:

  The BusLogic SCSI adapter is not supported for 64-bit guests.

  I searched on the web and this forum, and I can't find information on solving this problem.

  I do not necessarily first as suggested by the other answer on this subject and instead, add the following line to the configuration of the Virtual Machine's .vmx file.

  scsi0.virtualDev = "lsilogic"
  

  This should fix the error message that you get without having to directly edit the hard.  Take a look at: changing the file .vmx for your VM from VMware Fusion (1014782)  

  That said, if you want detailed according to the existing real configuration recommendations then... To help understand what components are, how best to provide comprehensive diagnostic information is to use the command "Collect information to Support" the Fusion of VMware (menu bar) > help > collect Support information and then attach the .tgz file it created on your desktop for a response post.

• Do not get the latest updates in my machine Acer 64-bit Vista SP1?

  Hello.

  I've noticed lately that machine of Vista SP1 for my old Acer OEM of six months (all updates since 05/26/2010) don't show me not updated like today even if I force a manual check. It only offers me SP2.

  MS changes something gives me not the today before the SP2 updates? I know that SP0 gets no updates as of 4/2010. I read SP1 which is still supported.

  That is what it is? Thank you in advance. :)

  Ant @ Ant links fed quality (http://aqfl.net) and The Ant Farm (http://antfarm.ma.cx).

  Finally, I see updates. I wonder why he has no sooner.

  Application server, probably. Criticism of three 3 & 10 (7) important security updates were released today as well a several steps the .NET Framework security updates, an update of the Windows Mail Junk e-mail filter and the latest version of the malicious software removal tool.

  Among the important updates (e.g., MS10-033 & MS10-041) consist of 2 or 3 separate updates. Depending on your version of Windows, your computer could be offered 15-16 updated separated. It will take a week or more for all the computers in the world to offer these updates through to THE.

  It took more than an hour to install nine 9 updates manually here (WinXP SP3).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Will not update for Vista SP1

  I've had Vista for a few years and had installed SP2. After a pretty bad fall, I had to "restore to the factory settings." This has left the machine as it had been when he came out of the box.

  I checked for Service packs, after he tried to update to IE7 for IE9 to say that I couldn't because I didn't have to update MS. I checked the system and found or SP1 or 2 is installed.
  So I checked updates, where it was SP1 is available. I clicked on "install" and followed the couple to guests where to he started to update. He completed the process and that you follow point that SP1 has been installed, however...
  When I check the system again, there is no sign on SP1 installed on the machine, and when I go to check updates, SP1 is also available, like as if it was never installed. Ive gone round in circles for a few days. Whenever it appears to install, but whenever he of not here and keep appearing as ready to be downloaded
  Help, please!

  Hello

  You did it happen any changes made to the computer before the show?

  Conduct the audit mentioned of the following measures:

  Step 1:

  Check if you have installed Windows Vista SP1 on your computer:

  To do:

  (a) click Start.

  (b) type winver and then press enter.

  Step 2: Perform the steps in the following article and see if it helps:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  

  http://support.Microsoft.com/kb/910339

  Let us know if this helps

• Can not find card his after clean reinstall from scratch for 32-bit vista from 64

  Hello everyone,

  Thanks in advance for taking the time to help me with this frustrating problem.

  I did a clean reinstall from scratch from vista 32 bit vista 64.   None of my goodies (mp3 player, phone... all unfortunately outdated) played on the 64 version.  That's why I nuked it.

  Resettlement has worked like a charm, except that now I can't get anything external outlets, which worked fine before the reinstall.  I used all aspects of the Device Manager and checked for downloads on each.  When I go to sound devices, it lists the sound card as "device high definition audio" and said that the software has been updated.

  The internal speakers are the delicious Altec Lansings... and they work fine.  In fact, when I plug something into the headphone Sockets, they continue to work.

  Therefore, I'm trying to find the name of the card its installed on my build and then find the driver for it.

  Here are all the specs from the rear if you need:

  Product: hp pavillion dv 9843cl refurbished

  I am a music lover and I love this computer, and I'll be happy if I can solve this problem.   I am facing withdrawals music and get weaker day by day.

  Anyone could offer me please advice?

  If there is any other information you need to know, please let me know.

  Thank you very much!

  Rob

  more humble newbie

  Message edited by robcoats on 05/28/2009 09:53

  I found it.  It's a Manager realtek HD audio.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-59516-1 & LC = on & DLC = in & CC = US & lang = to & os = 2093 & Product = 3689917

  This is a really obscure place on the HP website.

  Boy, what a pain in the butt.  I hope this helps someone else with my little obscure refurb.

• I cannot get the service packs 1 and 2 for 32-bit vista and internet explorer 8 on the automatic update system

  for explorer 8 I get a message saying that I'm missing so he can install updates but it does not say, for service packs of the automatic update system not even displayed the

  Start with Service Packs and then worry IE8 after that.

  Start here: Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  TaurArian [MVP] 2005-2010 - Update Services

• Ring type constant def not updated for LabVIEW 2010 SP1

  I have a problem with the update of the control ring LV 2010 SP1 constants.  If I change the values or names of elements of a ring of control that has the defined type (type def or type strict def) my constant schema do not update.  The constants are set to Auto-Update of type def and if I right click on the constant, change to a control and then back to a constant, they update very well.  And if I have a control/indicator on the comic it refreshes also very well.

  Anyone else seen this problem or can someone seeks to duplicate?

  LV 2010 SP1 bug?

  Thank you

  Dan

  It is not a bug. See here - http://digital.ni.com/public.nsf/allkb/46CC27C828DB4205862570920062C125

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.