Do symbols have different actions according to schedule

Similar Questions

• A symbol... of different actions at different times

  Is it possible to assign an action to a symbol to a point in the timeline panel, and then a different action to the SAME symbol somewhere different in the timeline panel (as I usually do with Flash)?

  I have an interactive floor plan that I'm trying, and the same key that activates a function must also be able to disable.

  Thanks a lot for all help with that.

  Hi Jaceman2,

  the same key that activates a function must also be able to turn it off.

  Your main timeline will have different States. You can get the current with sym.getPosition (), which returns a position in ms (a feature of the getCurrentLabel() , as we are used to in Flash, would be useful here, but he is not on Board at the moment).

  Your button click event handler then has a conditional statement, as indicated by Resdesign, the condition being that position value.

  An example of such a conditional based on position here: http://forums.adobe.com/thread/1204999?tstart=0

  Gil

• Messenger does not update and continues to fall. Have tried different things according to research on the web without success. Very frustrated!

  Messenger does not update and continues to fall. Have tried different things according to research on the web without success. Deleted Outlook connector, nothing helps.  Any ideas? OS is XP SP3.  Very frustrated!

  The message "network error has occurred. trying to read the file"C:\windows\installer\messenger.msi"

  Have removed Outlook connector, nothing helps.  Ran "msicuu2.exe" nothing helps.  Off Zone Alarm - No difference.

  All other programs except the AntiVirus closed during installation.  Would appreciate any help please.

  Hi a_wiseowl,
   
   
  It has a similar post here as well. Check if the advice given in the post will help you.
   
  Update MSN Messenger to Windows Live Messenger 2011, code error 80070643.
   
  If it does not help, post your query in Windows Live Messenger Forums for assistance on this issue.
   

  Kind regards

  Divya R - Microsoft technical support.

• Assigns different actions to the created child symbols

  I got to look at the post here http://forums.adobe.com/message/4642746#4642746 guide how to assign different actions to different instances of a symbol. I'm having a bad undertsanding how to implement it using bindSymbolAction().

  I tried using bindElementAction but then all the symbols of child does the same thing.

  Baiscally here, that's what I tried- http://www.dealsdrizzle.com/Research/Test1.html

  Click on the text, I generate 9 child symbols using a loop for.

  On the click of the created symbols I want to change the text in a DIV tag, based on what a symbol, I click on. However, all the symbols of creation seems to do all the same.

  Here is the source - http://www. dealsdrizzle.com/Research/Research.zip

  Please can someone give me an example of how to use it. or an alternative solution.

  This is a reworking of your sample. I resorted to jQuery instead of the for each... loop.

  Preview sample here.

  BEGIN copy here.

  Click Manager.

  table assigned to dta
  var dta = ['one', 'two', 'three', 'four', 'five', 'six', 'seven', 'eight', "nine"];

  Browse (jQuery .each) table (dta) access its index (i), value (val)
  $(dta, fonction (i, val) {} .each)

  Create an instance of the symbol for each index number: 0-8
  var box = sym.createChildSymbol ("theBox", "Stage");

  Rewrite the text element in the symbol of the index value
  Box. $('Text2').html ("" + i + "'");

  box of. $('Text2').html ("" + index + ": ' + item +'. '");

  Attach a click handler to the instance and send its value at the point > text element
  {$('box'). box. Click (Function ()})
  SYM. $("Text") .html ("" + val + "'");
  Alert ("Box #" + i + ": value" + val);
  });
  });

  End copy here.

  Download sample hereabove.

  Information on jQuery .each

  Hope this helps

  Darrell

• How to add different Actions on different buttons. How to receive the first screen in a stack

  Got two problems I have to solve.

  Let's start with my first.

  Source:

  public class core extends MainScreen implements FieldChangeListener{
      public core()
      {
          super();
          try{
              setTitle("Mobile Inspection Manager");
              RichTextField MainMenu = new RichTextField("Main Menu",RichTextField.TEXT_ALIGN_HCENTER);
              FontFamily fof = FontFamily.forName("Times New Roman");
              Font fon = fof.getFont(Font.PLAIN, 32);
              MainMenu.setFont(fon);
              add(MainMenu);
              SeparatorField Sep = new SeparatorField();
              add(Sep);
              add(new RichTextField(""));
              ButtonField but1 = new ButtonField("Equipment", ButtonField.CONSUME_CLICK) ;
              but1.setMinimalWidth(360);
              but1.setPadding(7,0,7,0);
              add(but1);
              ButtonField but2 = new ButtonField("Messenger", ButtonField.CONSUME_CLICK) ;
              but2.setMinimalWidth(360);
              but2.setPadding(7,0,7,0);
              add(but2);
              ButtonField but3 = new ButtonField("Reports", ButtonField.CONSUME_CLICK) ;
              but3.setMinimalWidth(360);
              but3.setPadding(7,0,7,0);
              add(but3);
              ButtonField but4 = new ButtonField("Preferences", ButtonField.CONSUME_CLICK) ;
              but4.setMinimalWidth(360);
              but4.setPadding(7,0,7,0);
              add(but4);
              ButtonField but5 = new ButtonField("Update/Sync", ButtonField.CONSUME_CLICK) ;
              but5.setMinimalWidth(360);
              but5.setPadding(7,0,7,0);
              add(but5);
              ButtonField but6 = new ButtonField("About", ButtonField.CONSUME_CLICK) ;
              but6.setMinimalWidth(360);
              but6.setPadding(7,0,7,0);
              add(but6);
              ButtonField but7 = new ButtonField("Exit", ButtonField.CONSUME_CLICK) ;
              but7.setMinimalWidth(360);
              but7.setPadding(7,0,7,0);
              but7.setChangeListener(this);
              add(but7);
          }catch(Exception e){
  
          }
      }
      public boolean onClose()
      {
              Dialog.alert("Goodbye!");
              System.exit(0);
              return true;
      }
      public void fieldChanged(Field field, int context)
      {
          master.Application.closeApp();
      }
      public void InfoScreen(){
          MainScreen Version = new ui.about.version();
          master.Application.changeScreen(Version);
      }
  }
  

  I've defined several buttons for the main Menu.

  How can I add these buttons Actions?

  I added one already to the Exit button. We work.

  My first idea was to add a method to implement the InfoScreen.

  But I get a Java error.

  Browsing through the Internet I have not found a solution.

  I took most of the developer Sources.

  But I don't know what I should do now.

  How can I declare different Actions for different buttons?

  2. question.

  I am swaping with screens with the pushScreen command.

  Is there a way to return to the previous screens?

  1 Add this as a change listener to each button.  In your fieldChanged method, mount ButtonField field, extract label and branch code according to it.

  2. pop removes the screen from the top of the stack so underneath the screen becomes visible. Stack screen blackBerry is just that - a battery.

  By the way - are you sure that you have found the font Times New Roman family?  There is no such family on BlackBerry.  Extract his name by using fof.getName () and display it in, say, Dialog.info - you might be surprised.

• allocation of different actions in 1 form

  Hi all!
  
  I was wondering if it is possible to assign different actions for 1 train.
  Let's say I have one that form (for layout reasons) I can't divide it into 2 forms.
  I want to make this a shape have 2 submit buttons.
  by pushing the button a dan target action 1. punching button 2, target 2...
  
  is this possible?
  
  Thanks for any help!
  
  Greetings,

  Here is an example:

• How can I have different accounts on different tabs?

  I really tried to search the forums, but I can't find how to have different tabs for different accounts. So, I have 5 accounts gapps under TB and would like to have each in their own tabs.

  Is it still possible?

  Best,
  Ben

  You can then mark the thread as "Solved" Please?
  Thank you.

• I have different bookmarks I want to keep on each computer, synchronization will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place

  I have not yet used sync, but I sense it's going to be a problem if I do. I have different bookmarks I want to keep it on each computer. Sync will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place? So I think that will erase the bookmarks on the second computer you configured to synchronize. Is there a way to merge bookmarks on every computer in the library of a bookmark that contains all bookmarks on both computers, so I'm not all bookmarks in sync?

  Just to be clear, this is something that we have commented several times in the forum, Firefox Sync adds everything that is already in the device for the account and pushes this info for the rest of the devices.

  So if you have 2 computers with data X and the other with the data from there, once you set up synchronization in both computers you will have X + Y at the same time.

  I hope that clarifies the doubts...

• Periodic messages CAN have different periods and different arbitration through a single interface IDS.

  Is it possible to send several messages with IDS of different arbitration periodically (messages can have different periods) by simple CAN interface?

  I use CAN frame API 2.7.5.

  Not any material support retransmit material timed, so I usually stick with software programmed if calendar is not super critical.  An improved version that works with an array of broadcast signals is attached.  Each rate is assessed at the same time, and then this frame is sent, if enough time has passed.

  

• Run each VI but then show after a different action by the user

  Hello everyone,

  Sorry for my English in advance, you will see some errors probably: 3 I hope you understand anyway!

  Well, I am a beginner with labview and I work in a project on a system that may take measures of speed and strength.

  I have already created several VI:

  -One for speed

  -One for the force

  -One to make a report

  - and another at the choice of the type of the event.

  To summarize, the system having to control 2 types of measures: 24 mph and 28 mph and we must conform to this 2 different tests, obviously.

  The goal is:

  (1) see the first VI: type of measure and leave the choice to the user about 24 or 28 miles an hour and then Labview tell if it complies or not after the measurement.

  (2) display the VI that show measures speed for users;

  (3) display the VI that show measures of force;

  (4) and finally the last VI to carry out the report: I have integrated checkbox, etc..

  I would like to help users switch in this VI through the buttons "previous" or "next".

  I already write a 'hand '. If I run the main I had a first push button to go in a VI, and then I had a few 'next' buttons to display the next VI.

  But now I have different problem and even if I try to tackle him I really don't understand how...

  I will develop my problems:

  -The main problem is execution of these screws: the test is in the 0, 6s. So I would run each VI during the test, record data and only then to show different for users through these VI data as I explained before. For the moment, as I understand it, my work just run different Vi when I click on the 'Next' button and finally I don't want to do that.

  -Another problem is that, in fact, the user can navigate between different VI, but they are not yet delete when the user clicks 'next' Finally it does nothing actually. In the example, I want the user to look at the speed of data, write them on another file, and then click Next, sign before removal and next show, write to another file, click Next, etc... and I do not understand how it is possible...

  -Finally, I think it's possible, but the best thing for me would be that different data stored in a file, with everything which is located on the front panel. If I had a graph, I would like the graph in a file, etc. And in the example for my last VI, the report, thanks to the box. If something is check, writing to a file, and if it didn't ignore it.

  Sorry for this very long text and my bad English. I hope you understand my problem... I really need help-_ - I am disappointed, this is an important project for me (learning) and I tried a lot last week, but I ask you cause now I have really idea more...

  Thank you in advance,

  I join my project to receive a little help and explanations for this problem

  Hello

  With your architecture, it is obvious that you can't go back.

  I would be more appropriate to have a main.vi with a State for example machine calling Subvi through sub - VI supanel controls front themain.vi.

  Here are a few documents:
  http://digital.NI.com/public.nsf/allkb/D587067E18E0E70186256D44007B91FE

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/loading_panel_in_subpanel/

  Adrien

• different front according to the structure of the case

  I have a VI with a structure of case 2 option (Boolean true/false). I wonder if it is possible to have different controls showing on the front panel depending on whether my boolean for this case structure is set to false true vs. Each option of the case structure has its own controls and indicators the other didn't need.

  Thank you

  You can use a tab control to group the two FPs.

  Use a 0 1 'boolean' to choose which tab to show. You can hide the tabs so that nobody will NVR know.

  Ben

• IN NOTEPAD CAN IT HAVE DIFFERENT 2 OR 3 TEXT SIZES ON THE SAME PAGE?

  I try to create the letter head in Notepad and want to have the fonts of upper header of the police of 'field '. is it possible and if so, how?

  Hello

  To answer your question: no, you can't have different text in Notepad. This is because Notepad is designed to create and edit text files using the basic of formatting text. I recommend using Microsoft Word (which is part of Microsoft Office) to have different text etc. styles (if you don't have Microsoft Word and don't want to buy it, you can use a trial version. In addition, ago a productivity suite open and free, similar to Microsoft Office and provided by another company, called OpenOffice, which allows you to have different text styles).

  Although, I would recommend to get Microsoft Office, there is a program called WordPad (or TextPad, depending on your operating system), which is designed to create and edit text with complex formatting. It should be in the accessories (in the same place as Notepad).

  Related links

  • Try Office 2010 - Office.com (link to download the free trial version of Microsoft Office Home and Student 2010 60 days)
  • Microsoft Store Online - Microsoft Office Home and Student 2010 - buy and download from Microsoft Store (link to buy and download paid for Microsoft Office Home and Student 2010)
  • OpenOffice.org downloads (link to download a similar, alternative and free version of Microsoft Office, provided by another company)

  I hope this helps and good luck.

  If this does not work and / or is not useful, just reply to this, and I'll see if I can revisit the issue to provide more useful advice.

  Spartan-837

• Separate alarms which have different thresholds based on the system

  Foglight does it take? How to create alarms which have different thresholds than the rest systems?

  Thank you

  Hi Syed

  Yes, this can be done by registry variables (dashboards |) The administration | Rules & Notifications | Manage registry Variables).  It depends on what you want to know which registry variable to update, but here is an example.

  You may have a "global" 90% threshold for a warning for the use of the disk.  However, you know that SystemA is 92% to the C:\ drive and it cannot be extended and data cannot be deleted.  You can update the registry FileSystemCapacityWarning variable for Type LogicalDisk, back-to-back topology to this object name SystemA C:\ topology and set your registry variable to 93%.

  The above is very simplistic - as I said, it depends on thresholds you want to create, what Types of topology, you should change.  I also recommend the creation of a copy of the variable and have your rule [copy] to reference that instead of the variable OOTB.

  Brian

• Can I have different screen on two monitors background images?

  I use two monitors side-by-side.

  There is a supply virtually unlimited background images to display, including the pre-made themes and slideshows, but no way I can find to have different images on each monitor.

  Am I missing something?

  Hello

  Windows 7 doesn't have this built-in capability. There are third-party software multi-screen solutions.

  I also use two monitors and I think a better ioption is to use two screens wallpaper. It is an image large enough to cover both monitors. For example, I have two monitors set in 1680 x 1050 and I use a screen background image which is 3360 x 1050 and set the tile option. It's a cool effect.

  There are a lot of websites that offer these dual monitor wallpapers. Just use your favorite search engine and look for "wallpaper bi-ecrans".

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• ACS 5.3 - the user can be authenticated by different stores according to ndg?

  Hello

  We must use the same ID user to access VPN and 802. 1 X:

  802. 1 X local switch authentication request will use AD

  VPN VPN device authentication request will use RSA

  I am OK with NDG to determine what feature request comes from.  What I did not work, this is how the same user to user ID can be linked to different authentication according to NDG.

  An example configuration would be ideal

  Thank you

  Peter

  You must create 2 types of device one of switches and others for firewalls.

  Under the terms of the default network access > identity > click on "result rule based selection" > create 2 rules

  1. to dot1x > select the source type and the identity of the device.

  2. for the vpn > select the source type and the identity of the device.

  Note: The user must exist in both the database.

  Kind regards

  Jatin kone

  * Does the rate of useful messages *.