Do when the toolbar is disabled - none of the tools be used?

Similar Questions

• Firefox crashes when the flash is used.

  Firefox crashes when the flash is used at all.
  I've checked everything and it is only with flash 10.1.53.64 on the tree

  == a site using flash is open

  I use Windows 7 and I have the same problem. When I went to 3.6.4, Firefox would be to lock up whenever I tried to play any flash video. I have tried several sites and it would lock up every time I have to close by the Task Manager. I've updated the Flash Player and even tried uninstalling and reinstalling, nothing could solve this problem.

  I read that they supposedly separated the plugins like flash in a separate procedure to keep firefox crash if flash does, but apparently they didn't do this right. I had to go back to Firefox 3.6.3 worm and flash works without any problem in this version. Seems that firefox must correct 3.6.4 since it seems he's messed up video flash for many users, if not most. It is useless if it can't play flash since almost all Web sites use this format!

• Vista on the XPS M1330 laptop lost wireless when the lid closed (using the external monitor)

  Hello

  I bought an external monitor/keyboard/mouse for my laptop XPS M1330 (connection of the monitor via a HDMI to DVI cable).  However as soon as the lid is closed the wireless network stops working - opening the lid immediately launches the application again.  A network through a physical cable connection works with the closing of the cover.  Note, the network remains connected (or at least is always intended to be connected) it has not sent or received no information, while the lid is closed.

  XPS M1330 laptop under Vista Home Premium SP1 - Wireless card is Intel PRO/Wireless 3945ABG running the latest drivers 11.5.0.32.

  Power options are obviously set to shut down the computer laptop shut down, goes to stand by, or go into hybernation when the lid is closed... it is set to 'status quo '.  The properties of the wireless card has the "Ad hoc power management" disabled and the "allow the computer to turn off this device to save power" unchecked.

  When the cover is opened, the monitor takes the maximum size of the screen of the laptop, which goes against the objective set for the monitor in the first place.

  (As a side note, the laptop also refused to work with a wired via a network connection "homeplug" - even if a hub is placed between the laptop and the homeplug - and I refuse to run a cable between the router as the laptop will be used in another room of the router).

  Is there a solution to this, or is this a problem with Vista?  (Because if this is the case, it is yet another nail in the coffin - and it becomes difficult to find any more room for nails more!  Windows 7 is fast approaching!)

  See you soon,.
  Tom

  Hi tom101449,

  ·          The WiFi was working fine earlier?

  ·          You did it all change hardware or software on your computer before this problem?

  Method 1

  If the problem occurs after you install the latest drivers Intel PRO / Wireless, you can restore the drivers for the card wireless to the previous version. For more information, see this link.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-a-driver-to-its-previous-version

  Method 2

  When you connect to your wireless network, make sure that the option 'Save this network' is checked.

  In addition, right-click on the network > properties, then on the connection tab, check the box that says "connect automatically when this network is in range.

  Reference:

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ButtonSkin call measue() twice when the icon is used

  Maybe I'm missing something, but it seems that the default value as the Spark ButtonSkin.mxml eventually Measure [] call twice every time that an icon is used.

  Also, last time I check the value by default than panelskin. MXML eventually call updateDisplayList() twice every time the 'borderVisible' property is displayed/hidden.

  Supposed to be a bug has been saved for the second. With all the talk about the optimization of performance lately, I would have thought that these things could have been watched in the now...

  Loaded external icons loaded a frame later (or more, as they are)

  loaded asynchronously).  Therefore, when the button is first created and

  measured, is not a made-to-measure and later icon when the icon is

  happen, it must measure again.

• The deleted output tables finished when the conditional tags using build

  Hi and thanks for any help you can offer on this...
  
  I use the WebHelp/print Documentation HR 6 single-sourcing method, and I created two build conditional tags - "OLH" (online help) and "printed". Essentially, the conditional tags are awesome... except when my content includes HTML tables. If a table exists within a set of conditional tag material, material that exists AFTER the table (and outside the conditional tag) is omitted from the finished output (i.e., regardless of the unique method out of the Source used for the production of finished products - WebHelp or printed Documentation). In some cases, only certain documents after the table is omitted.
  
  For example, in a comprehensive document which includes a specific paragraph and a data table I want to exist only in my printed docs. I apply the tag "Print" in this paragraph and the table. Once I have generate the schema of WebHelp (or even preview and apply the term appropriate on the conditional tag build), labeled "Print" content is left out, but is so everything that followed it. even if I don't apply a tag of conditional compilation to the material in question.
  
  I have a workaround, but it sucks... If I delete the tables (and re - format the text content), everything is fine, and the build tags work properly. The thing is, I want to use the tables in my content.
  
  I wish a WYSIWYG solution, but if I have to change the code, I'll live... I just need to know what and where to change (I played with the ' < p > < style = "" x-condition: printed; ' > ' tag and additional locking "< /p >" and "< / style >" tags, but that has not worked ").
  
  Thank you for taking the time to review that and for any help you can give.
  
  

  Hi Vernholio,

  This looks like a problem that is covered in the forums before. Basically, it happens when the Board as a whole has been select. If you click and drag to select all of the cells in the table, then apply the conditional tag, there should not be problems with the rest of the content.

  See excerpt on Peter Grainge's site #69

• Firefox closes when the 'tools' 'options' clicked + do not respond to typed URLS but ok with the URL "bookmark".

  Study why FF used as much memory I have advised me to use the button "restore Firefox".
  To this, but now I can't use the 'tools', 'options' ' cos it closes the browser. Other menus under 'tools' work OK.
  If I try to download updates plug-ins etc. the FF browser closes its doors.
  Impossible to browse my folders of images to add to interactive websites... firm to the low FF
  Can type a URL but nothing happens, but if I get a url 'signet' or a 'story' so it's OK
  Firefox is 16.0.1
  Any help is appreciated please.

  I had obtained with regard to the conclusion that my Firefox default was empty files in 'profile '.
  However, I followed your advice and copied Setup from USB on the front desk of actually installing.
  Fantastic... all my Firefox info has been restored.
  It seems that my old Firefox default had lost data while trying to solve my problem of congestion CPU.
  Thanks again for your help.

• Is it possible to configure Firefox for some cookies are stored even when the Tools/Options/Privacy is confirgured delete all cookies when Firefox is closed? In other words, an 'exception' list so that certain specified cookies would not be remo

  For some sites that I visit on a daily basis, it's a pain to have to sign in each time. (e.g., Zap2it, which provides TV listings in your area). However, I like defining the Tools/Options/life private to keep all cookies until I close Firefox. I wish I could set up Firefox so that all witnesses would be removed EXCEPT those to which I have. If I could do this, I don't have to log in each time.

  You cannot use Delete browsing, search and download history on Firefox if you want to keep specific cookies by setting an exception.
  "Clear recent history" is all or nothing.

  You can leave the cookies expire if you close Firefox if you need to keep specific cookies.
  Tools > Options > privacy > Cookies: "Keep until the": "closing of Firefox".

  See also Cookies - Information that Web sites store on your computer

• Impossible to select the source for the tool clone using Alt + click in items 10 - please help

  Ive just installed 10 items, but for some reason any Im unable to choose a source using the tool clone by using the alt + click, Ive tried everything, and it is now driving me crazy.

  Please let me know if you have any suggestions that may help.  Thank you

  R_Kelly and Ken - thanks a lot for trying to help.

  IM happy to say that I managed to solve the problem - I thought I had tried every option possible IE the CTRL, alt + shift, alt gr etc etc, but I had not tried the SHIFT key on its own because it works!  Thanks again.

• How can I disable the touchpad on my computer when the mouse I use is on?

  I entered the touchpad and changed the settings to do what I want it to do.  I make the changes but it either completely disables the touchpad so I can use the mouse or simply, it ignores the setting and leave the keyboard and mouse over.  I spent in and changed the settings from all directions and it will be not just to disable the touchpad when mouse is on.  Can someone help an old lady get this silly working thing?  Thank you

  Hello

  I suggest to disable the touchpad in Device Manager and check if it helps.

  a: Right click at the bottom left of the desk.

  b: select Device Manager.

  c: In Device Manager, expand mice and other pointing devices and search for touchpad.

  d: right click on the touchpad and click disable the option.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Black square on the screen when the GPU is used?

  Hey everybody.

  Since I got my new computer, when I turn on the graphics processor, a black square appear and seem to block some of my screen. The problem may be solved by disabling the graphics processor, but it will limit what I do. IM using windows 10 64-bit and my graphics card is an asus 1080GTX.
  the black square on the side.

  Not yet done.   Disable the GPU on Adobe Camera Raw feature.

  

• Lenovo announces when the mouse is used not to come

  When I'm looking at screen if I keep not move the mouse after that about a minute an ad from lenovo with loud music constantly discusses how to stop I have a lenovo series h3

  Contact Lenovo support.

• App works perfectly well on the Simulator (using all modes) and peripheral when z10 in the communiqué of the execution and debug mode. But creates a 'SIGSEGV = 1 fltno = 11 ip = 781722ec error code' when the term is used.

  My application switches between two documents qml is a home page, and the other is actually a video player. Whenever I press the button to go to the video page, it crashes on my z10 and generates the error «terminated code SIGSEGV = 1 fltno = 11 781722ec = ip...» ". But on the Simulator, it works (without of course plays video). When I use the race version and the debug mode, it works perfectly on my z10.

  This problem occurs frequently when I add a new code element. First of all, it happened when I added a scrollview and container, and it's happening now again when a defined a struct in the header file.  It would be nice to ignore this problem? or y at - it some deeper underlying problem which is the cause

  Just tried, I received the SIGSEGV error too, it looks like parent to AbstractPane fixed it.

  void ApplicationUI::changeScene(const QString& newQmlFileName) {
      // Create root object for the UI
      QmlDocument *qml = QmlDocument::create("asset:///" + newQmlFileName).parent(this);
      qml->setContextProperty("_app", this);
      AbstractPane *root = qml->createRootObject();
      root->setParent(this);
  
      // Set created root object as the application scene
      Application::instance()->setScene(root);
  }
  

  My test project is also attached to this message.

• Error messages when the definition to using "filter by attribute.

  I run FM8 on SOLARIS.

  When I activate a new 'filter by attribute' I get the messages:

  Show/hide FM8_SYSTEM_HIDEELEMENT is incompatible

  Show/hide FM8_TRACK_CHANGES_DELETED is incompatible

  Filtering in a separate bookfile works, but the problem appears when I run "update book."

  The book used to have "conditional text".

  Best regards

  -Gunnar

  FM just trying to tell you that some of your files have different settings for the latter as the other files in the book. The way to get rid of this message is to import Document properties and parameters of conditional text in a file that is well known in the book for all the other files in this book.

• what you get when the sequence is used as output, tension or strain?

  Mr President

  I m using scxi1520 with watchkeeping configuration, by setting the entry like strain, what value I get is not strain that I calculated analytically. someone told me that what value you get by that is tension not strain, I calculate strain from here by the formula.

  I don't get that this is strain or tension.

  I have an extensometer of 120 ohms with two gage factor. Please clear my doubt I have with this as soon as possible.

  Think about the data being represented in different ways.  Your contribution is the strain.  The strain gauge that converts resistance.  The bridge becomes the resistance a tension.  An amplifier multiplies by a constant tension and perhaps subtracts an offset.  The analog digital converter changes the analog voltage to a sequence of tension with two possible values (0 to 5 V) at every moment in the (digital) sequence.  The computer processes these digital tensions as numbers that have a strong correlation with the amplitude of the analog voltage.

  But you try to measure the deformation, so you don't really care voltage analog or digital, except that need to know the relationship between them and the original strain.

  Your tension measures data acquisition system. You must provide conversion from units of the strain through calibration.

  Lynn

• Recently, my screen goes to power saving mode when the computer is used.

  This does not happen on a particular site... it's pretty random.

  The computer does not turn off but the only way to get the monitor back on is to restart the computer.  Any ideas what could be causing this?

  I did, but still having the problem.  Thanks for your help!

  Looks like the defective video card/cable eventually.  Could be power issues or motherboard as well.