VCS - CPL to block call routing to and from the same area of neighbor

Hi all

Is there a CPL rule that can be written to block calls from a neighbouring area to the same area of neighbor?

We have problems with CUCM sent appeals to the our VCS VCS then routes the call return CUCM, causing thus "too many jumps."

In the example

MOVI user control VCS try to compose endpoint registered RTC CUCM, but incorrectly dials

Appeal does not have to search for the terms of local area

Call does not match search for VCS Expressway rules

Call corresponds to captures all of CUCM (. *) @domain.com

CUCM does not form DN or URI for the wrong phone number and the call is routed to the VCS control due to the SIP routing model of *. * on CUCM

We have to capture all CUCM at the end, since we offer PSTN, as well as our users and phones have the alphanumeric URIs assigned to the DNs for Jabber, etc.

I fear that he is not really an easy way to do it, I know because the call charged CPL first, CPL don't know what area it was intended for.

It's probably more easily accomomplished with a slight modification to your rules of research rather than spraying anthing "@domaine" everywhere - something like:

Anything incoming directly at @domaine in the nearby area of the local area (as is inside your organization, such as if the CUCM not found and sent it to the VCS he won't be on the CUCM, so must be local (or nonexistent) - and stop.

And the opposite of the above - route whatever it is for @domaine of the localZone.GetDaylightChanges (because it was not found locally) to stop and the CUCM neighbour-

And do similar for what is coming from other areas outside to route to wheverver that will be endpoints.  In this way, your call should not be bouncing back between the CUCM and VCS and create the loop that you are currently experiencing.

Of course, if your environmetn is a little more complex than the simple CUCM and VCSes, this can be a bit oversimiplified, but could lead you in the right direction.

Another thing to consider too - if you put in your endpoints in a directory, users can use - that will help you to prevent wrong type stuff :)

Wayne
--
Remember the frequency responses and mark your question as answered as appropriate.

Tags: Cisco Support

Similar Questions

  • my account is block, I send verification, and always the same why lie to me

    I'm trying to GIS in live Messenger and I see a messege, noticed unusual activity in your account and is temporarily blocks after that I have send Pentecost verafication my cell # and when I recive the code I send back and nothing im try many times nd always the same, after all is word my foult is windows live foult .please OPE it my account I need of

    to talk to my friends please hel me

    Hello

    We cannot help you with responses from vista

    they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

    http://windowslivehelp.com/product.aspx?ProductID=2

    ____________________________________________________

    For the different Forums for Windows Live Applications, select the link below
     
    Welcome to Windows Live Solution Center
  • Two different iPhones to receive calls from the same number at the same time

    Hello.

    Latelly I receive missed calls from my own number when I call my wife. She also when she calls me. Today, my father called me and at the same time my wife's iPhone rang too! We use different carriers! How is it possible? We use the same Apple ID to iCloud and applications.

    Today, I received a third sim iPhone and pitch. The problem is the same. What should I do?

    You must stop using the same appleID what you're feeling is normal if you have a mac or iPad, they would be too ring

    you're the appleID if you and your wife will also get the same iMessages and you will not be able to facetime mutually

    You can always share applications and tastes using family sharing read more implemented the family share - Apple Support

  • My Microsoft email has been blocked (* address email is removed from the privacy *).

    My Microsoft email has been blocked (* address email is removed from the privacy *) after a spammer hacked in. I've filled out all the forms (4 times now) and have heard no word back. I can't access the account, or change the password because my email address linked ceased to exist and the security issue does not. Please, can anyone help? You can reach me at my temporary address of * address email is removed from the privacy *.

    Thank you for visiting the Microsoft answers community site!

    The question you have posted is related to Windows Live Hotmail and would be better suited in the Windows Live Solution Center.

    Please visit the link below to find a community that will support what ask you

    http://windowslivehelp.com/forums.aspx?ProductID=1

  • Phone call claiming to be from the Windows team

    I just received a phone call claiming to be from the Windows team in Ontario (Canada) saying that my computer was downloading tons of things on the web, and it had infected and it was my computer.  I'm guessing it's a scam?

    Fake phone calls to technical support

    Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

    Please see:

    http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

    Microsoft issues never not solicited for phone calls of support or security.

    These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

  • You try to run a Site to site VPN and remote VPN from the same IP remotely

    We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

    Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

    My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

    Hi John,.

    Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

    CSCuc75090  Details of bug

    The crypto IPSec Security Association are created by dynamic crypto map to static peers

    Symptom:

    When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

    Conditions:

    It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

    The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

    Workaround solution:

    N/A

    Some possible workarounds are:

    Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

    Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

    Below some information:

    http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

    Hope this helps,

    Luis.

  • Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any?

    Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any? I don't know how to resolve this issue, if someone could point me in the right direction.

    Have him create a id Apple here- create and start using a Apple - Apple Support ID, and then both you can create an album-photo sharing Photo Sharing - Apple Support iCloud

  • it crashes all the time. I just start and down, removed all the mozilla and reinstalled and still the same

    I just launch thunderbird and it crashes. I can't get an error report. I have not added any addons. and I uninstalled, reinstalled and redown loaded my gmail. and still the same.
    It says "not answered" forever

    Hold the SHIFT key and start Thunderbird and hold it down until you are prompted to enter in safe mode.

    What antivirus do you use? They have a propensity to crash Thunderbird.

  • Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

    I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

    Tried to check and repair disk permissions. This finished.

    Then tried to empty the trash again and got the same error 50 yet.

    I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

    I can't go in safe mode or in disk utility.

    Any suggestions on what to try?

    Thank you

    What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

  • photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

    photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

    If you want any help here, you'll have to tell us what the error message.

    Which report you errors to?

  • Can I change the new memory and at the same time to replace the Rams?

    Can I change the new memory and at the same time to replace the Rams?

    If a MacBook Pro RAM and drvie hard can be modified/improved depends on the submodel and we do not know yours. There are dozens of variations of the MacBook Pro issued since 2006, and you do not want guessing us!

    Please do "about this Mac" in your Apple menu to get this:

    Notice the line that I have highlighted with the red arrow. Please tell us what your computer has in the thr same place. However, do not post any serial number.

    With the exact submodel we can better advise you of any available upgrade paths.

  • I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan.

    I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan. What is the best way to do it?

    I think the best would be a new installation of El Capitan on the new HD and reinstall the applications on the new HD, and then migrate the data and setting for the previous version of OSX. In this way the least unused stuff enters the new OSX version

  • reinstalled itunes on new pc and all the songs are duplicated

    r

    I reinstalled iTunes on new pc and all the songs are duplicated. How can I delete everyone else?

    iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

    Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

    Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

    Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

    (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

    The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

    TT2

  • Is the card sim iPhone 5 c and 6 the same?

    Is the card sim iPhone 5 c and 6 the same?

    The iPhone and 5 c 6 both use cards SIM of Nano.

    Know what SIM card from your iPhone or iPad using - Apple Support

  • I just got a call from the same thing with the eventvwr in the race, I wrote down everything, is it a scam?

    I just got a call from the same thing with the eventvwr in the race, I just wrote it down at the bottom, if it is a scam What are they actually accomplishing?  This gives them access to our computers?  They do not seem to be asking for money or that comes up when they try to "fix"?

    You are not alone! See...

    I received a phone call from someone who claims to have a Virus (August 10, 2009 &ff; 40 pages)
    http://answers.Microsoft.com/thread/4489f388-d6de-416d-9158-0079764bb001

Maybe you are looking for

  • I want to cancel the order of the cloud photomyne

    I want to cancel the order of the cloud photomyne... because I just upgraded.now I don, t like it.

  • Synchronize the photos folder

    Hi all! I have the problem with the understanding of what is a convenient way to use photos on my MacBook with the iPhone. Right now I use autoimporter. I see how it should work: (1) I plugin my iPhone to MacBook (2) it automatically synchronize phot

  • Sa20 S103: DVD burner?

    is it possible to write a dvd with cd - rw a S103 SA20 dvd player

  • threshold problem

    Hello I try to make a thresuld of the isolated object, but I have problem After doing a threshuld the picture will be black all time what is important what is the value of throsuld I first read image aqusition then convert the gray then filter by use

  • How to divide the source file without losing labels

    Hello I wonder how I could split my file source into two (or more) without losing the tags...