Do you know what is HPSF_Rep.txt?

Original title: HPSF_Rep.txt

Hello

It is a text file. Double-click it to read what is on the inside.

Tags: Windows

Similar Questions

Should I delete the programs of 2004? How can you know what is safe to delete?

Original title: remove programs

I think I have a virus. I see on my computer a few applications with and installed as of 2004. The computer was purchased in 2007. When I run it in safe mode, it works fine and all applications have a date of 2007 or newer. Should I delete the programs of 2004? How can you know what is safe to delete?

Hello

This is not an indication of malware. Could be those are placed on the
computer by the manufacturer of the system and that was the date that firstly, they prepared their
for massive installation, or if they did not set a date and be used arbitrarily.

=============================================================

If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.

No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.

It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.

TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htm

Original version
http://OneCare.live.com/site/en-us/default.htm

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

I hope this helps.

"Cannot download Windows 10, error: something needs your attention" is not an indication for me, so maybe one of you know what needs attention?

Original title: upgrade Windows 10

I can't even download Windows 10 update, so I do not understand the problems listed online. Why this fails?

'Something needs your attention' isn't a clue for me, so maybe one of you know what needs attention?

Sandi

Try to run the Windows Update Troubleshooter first, restart, and then try again:

http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

Also check:
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
If the problem persists, try to upgrade manually:

Option 1:

Download the media creation tool

Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

Note: How to check if you are downloaded or installed the update Windows 10 November

How to create an ISO or USB drive.

Select upgrade this PC now and then click Next

Option 2:

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

How can you know what drivers and programs are essential and those that can be deleted without harming my computer?

Original title: completely clueless

I'm totally clueless when it comes to computers, but I try very hard to learn. I am using the help section a LOT, but I can't seem to find an answer to the only thing that makes me crazy. How can you know what drivers and programs are essential and those that can be deleted without harming my computer? I have a very basic net accountant I learn on before I screw up a portable more expensive and I do a cleaning on my C and D drives to improve performance because it runs so slow but it tells me I have the drivers who slow down Windows. I would greatky appreciate any assistance from someone who has the patience of a saint and is willing to take the time to explain it to me, in terms laymans. Thanks in advance

Drivers: you should know what you bought (in your machine) and what * you * want out of it. If you want stability and things work properly - let alone the drivers. If you want more performance check (and other games) in the drivers of motherboard chipset and video network from the manufacturers Web site... For more stability stick with the OEM website (HP, Dell, Lenovo - the assembler of the whole machine) and slightly more performance/push the limits (even if they want to work too - so still some stability) - access to websites of its components manufacturer.

With regard to the programs: you can decide what you use and do not use. If you are not sure, look it up (Google) or ask.

BlackBerry Smartphones do you know what are my problems with my camera and how to solve?

Mine is Curve 3 G running OS 6. I have 3 years now.

Never installed any themes. I removed all languages, except for English and mandarin. Obtained third-party applications, which are whatsapp and screen grabber. I also youtube, twitter and yahoo messenger but I think that they are developed by rim. I uninstalled the default games from the early days, owner of the device and never install others. I also removed the maps and the world of blackberry. In any case, they are useless.

I don't store a lot of pictures and the ones I did on my ram external 2gigs. I have not all media files. Just the default values.

I join 1 group and it's not active. I don't have multiple conversations. I end conversations as soon as they are finished. BBM contacts grow about 1-2 monthly and phone books from 3 to 5 every week. I am a seller.

I delete e-mails from the unit as soon as I finished reading the. Never navigation because the browser kills each front page loaded completely, making me unable to use youtube.

I remember regular cleaning to run hourly.

I do battery pull everyday because I'm tired of waiting for the clock or the gel to disappear, which could take more than half an hour if I let them which of course eventually crashing.

Never have data backup because the device freezes the second I connect it to the PC with desktop blackberry on.

So the question is do you know what are my problems and how to solve? Because I did not.

Hello

Well... We must memory cleaner is enabled, this feature is known to cause many problems!

Try a battery pull reboot and let us know.

You know what they say "is not a question of if, but when.

You know what they say "is not a question of if, but when. I had a redundant backup system for my files for several years now. I have a 3 TB drive desktop and laptop that I support each other up to a 2 TB. Recently, I upgraded my computers HD and needed to create a mirror image of the old HD. So in a moment of weakness I formatted the external HD which put my image of mirror and is gone to work, my laptop HD, which is now my only copy at all, had a problem and all my pictures have disappeared. I called Transcend and gave me the recovery software and I ran and more 300 000 recovered files. implemented in recup_dir 635 files. When I called them, they said, I had to sort through them to find what I need. I looked at my now confusing LR and it says there are almost 64 000 missing photos, not really a PIN in a haystack, but as close as I ever want to be that. Someone has an idea or experience on how best to go about this? I'm in trouble... Laughing out loud

Hello, nice of you to send me a message. But I think that I have not

good to explain it. All my photos were on an external hard drive that

has failed. So I called the Transcend tech and they gave me the software to

the files, in fact he recovered 370 000 files and I need to sort

through them to Palm them the place to hide them in folders so that I can

recreate my LR catalog.

Yet once again, thank you so much for reaching out and have a wonderful day!

Lewis

The game, 18:01, Chetna Srivastava, [email protected] , 28 January 2016

Do you know what is included in the annual adobe PDF pack?

Do you know what is included in the annual adobe PDF pack?

Hello

Please see: -.

FREQUENTLY ASKED QUESTIONS | Adobe PDF Pack

PDF Converter online, convert to web or Acrobat Reader | Adobe PDF Pack

Hi guys, I have to cancel my account creative cloud, but I did not undo the plan in my menu of management plan. Do you know what I can do? Thank you

Hi guys, I have to cancel my account creative cloud, but I did not undo the plan in my menu of management plan. Do you know what I can do? Thank you

Use the phone or Chat - support

To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails try using another browser.

https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb Governments

800-833-6687 (the only one from 05:00 - 19:00 PST, Monday to Friday day US).

How can you know what remains during a restore?

I just got a new iphone more than 6 s and its been 2 days and is always restore things. is it possible to know what remains to restore or if its stuck? I was going to upgrade the software on it but can not until its finished. TIA

Hello SCB1021,

Congratulations on your new iPhone 6 s more! I know how you want to finish the installation process and start to use your new iPhone. Let us ensure that we discussed a few steps that can help your situation.
Restore my device from a backup to iCloud takes a long time

Restoring a backup can take time because of the size of the backup or the speed of Wi - Fi network. For example, iCloud may take about 1 to 4 hours per gigabyte during a restore process.

There are several steps that follow:
- In iOS 8 or later, check the status of the transfer on your device under settings > iCloud > Backup. If the restore process is in progress, the backup setting is gray.
- Make sure that your device is connected to the Internet with reliable WiFi.
- Make sure that your device is plugged into a power outlet.
- Check the Apple progress bar that is displayed during the transfer of a backup.
If you need help, restore your device from a backup to iCloud

Thank you for using communities Support from Apple.

Do you know what is PerformerSoft LLC?

This is a file it is whenever I turn on my computer to the top pop. I don't know what it is and I can not find PerformerSoft LLC in my install or uninstall on my computer. My computer says it can damage or damage to my computer, and I don't know how to delete or prevent to appear, whenever I start my computer. I don't know what it is. And I wonder if you have ever heard of him. I don't know anything about it, or where it comes from. It will harm my computer?
At this moment I have free: Zone Alarm, AVG antiviris, Spybot and Ad Aware. They work very well for me. If you could help me that would be great.

Thank you, Sherri

According to the InstallBrainService.exe in C:\Program Files\InstallBrainService\ properties, the certificate is enrolled in Performersoft LLC. InstallBrainService.exe was installed when I installed the software PC Performer.

Do you know what does DPI mean? How can I increase the resolution of a TIFF image at 300 DPI for shipment to a Publisher?

Is anyone here know what DPI? How can I increase the resolution of a TIFF image at 300 DPI for shipment to a Publisher?

If the resolution is already less than 300, may not increase to make it higher. You can only do low.

=====================================
Yes, you can increase the DPI value.

every time when I start it up and go to my office, a 2 x 3 box pops up for a split second, how do you know what he says?

When I boot my laptop with Vista, loads and gets on the desk on either primary or a guest account, a small box about 2 x 3 "appears for only a fraction of a second, but I can see there is a red X on the top right corner and two clickable buttons, but I can't read what it says. How will I know what it says; where can I go to find it. There is nothing in sysconfig on startup, etc.

You must have something in the system start, probably in one of the keys to registry Run, which is something you don't recognize to run at startup.

How can you know what charger completed?

I am loading a bunch of SWF files in my movie, and when they finished loading I need to change each color of sovereign wealth funds based on my xml data. My problem is when my Event.COMPLETE off I do not know what charger, it belongs to retrieve the correct XML. I tried to give the names of my Chargers but I can't access the Event.Complete function name. My trace causes the error: the property name not found on flash.display.LoaderInfo and there is no default value. How to access my charger name?
for (var w3:int = 0; w3 < cartXML...) Item.length (); W3 ++) {}

var thumbLoader:Loader = new Loader();
thumbLoader.name = String (w3);
thumbLoader.contentLoaderInfo.addEventListener (Event.COMPLETE,
{function(e:Event):void}
thumbCount ++;
trace (e.Target.Name);
If {("setSkinColor" in e.currentTarget.content)
Object (e.currentTarget.content) .setSkinColor (bought. @bodyColor, 255);
}
else {}
e.currentTarget.content.setData (255,255).
}
thumbArray.push (e.currentTarget);
If (thumbCount is cartXML... {Item.length ()}
fillDataProvider();
}
});
var thumbURL:URLRequest = new URLRequest (this. Path access + cartXML... Item [W3] .source);
thumbLoader.load (thumbURL);
}

The target of the event is the contentLoaderInfo. So if you want to find the name of the shipper, you should be able to use: e.target.loader.name

Windows Media player 11 says I'm missing codex, how do you know what Miss me?

I have Windows Vista, I am trying to use to use Windows Movie Maker, some of my videos are downloading on the site, and some are not say C:\Users\Momma Kerri\Desktop\Movie 52. mov could not be imported OR I do not have the law codex. Help, please.

Hello

Codecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

All you need is good Codec - get these if 32-bit.

-Free - CCCP also get free tool of insurgents
http://CCCP-project.NET/

FFDSHOW - free
http://sourceforge.NET/projects/ffdshow/

Check here:

Plug-ins for Windows Media Player
http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

---------------------------------------

VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

VLC - free
http://www.videolan.org/VLC/

-------------------------------------------------------------

If 64 bits and you need codec.

Read this 1st and go that route, or use the one below. (Vista or Windows 7)

http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

--------------------------------------------------------------------

If 64-bit - can run WMP in 32 or 64 bit mode.

Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

For 32-bit use these - OR the 32 bit ones listed above which I prefer.

K - Lite Codec Pack 8.0.8 (or newer)
http://www.codecguide.com/

Use them for 64-bit:

K - Lite Codec Pack 5.5.0 (64-bit) (or newer)
http://www.codecguide.com/

-------------------------------------------------------------

You know that you use WMP 32 or 64

Change, modify or value 64-bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default (or WMP12 - Windows7)
http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

-------------------------------------------------------------

And you can use it when necessary because no codex is usually required.

VideoLAN - VLC media player
http://www.videolan.org/

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

How do you know what was the latest patch installed on VMware ESX Server 3i, 3.5.0 207095

Hello guys,.
I've been running an old server that was installed in a test system on workstation DELL - Optiplex GX620 (32 bit).
During installation, I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:
"interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE' as follows:
"interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI' this is it worked and I used it for 3 years now. However, right now, I was hoping to be updated with the latest patches and updates and I do not know if I just ESX or ESXi, or what was my last update, and what it takes then.
I used this command to get the following result:
# vmware - v
VMware ESX Server 3i 3.5.0 build-207095
... I think that the 3i says I have an ESXi 3.5.0 but build 207095 the buid even as ESXi 3.5.0 patch 5?
If this is not the case, how should I do to update? What is the KB # I should download?
I can manage using vSphere Client 5.5 and I can't SSH using PuTTY.
Note: When I run... "# esxupdate - bundle = ESXe350-201302401-I - SG.zip updated ' of in the folder where his property in the data store, nothing happens... just a new line scrolls.
Also...
# esxupdate query
<? XML version = "1.0"? >
<>request-response
< installed packages >
< package ID = "ESX-207095" >
firmware < name > < / name >
< version > 3.5.0 < / version >
< rel > 207095 < / rel >
< / packages >
< package ID = "ESX-CLIENT-204907" >
< name > viclient < / name >
< version > 2.5.0 < / version >
< rel > 204907 < / rel >
< / packages >
< package ID = "ESX-TOOLS-207095" >
< name > tools < / name >
< version > 3.5.0 < / version >
< rel > 207095 < / rel >
< / packages >
< / packages installed >
< / request-response >
# /vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/patches/ESXe350-201302401-O-SG
... is there any update for this system? I therefore believe that the patch software etc was not around when I was installing this server in 2010.

Based on KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1014508 you run ESX 3.5 Update 5.

Do you know what is HPSF_Rep.txt?

Similar Questions

Restore my device from a backup to iCloud takes a long time

Maybe you are looking for