Do you use desktop Discoverer and discoverer more?

Similar Questions

• Cursor turns in a circle when you use the pen and Wacom Tablet?

  When you use the stylus and Tablet Wacom the cursor becomes a circle inscribed in a circle and use.

  What type of Wacom tablet work?  I have a Cintiq, and according to that tool I use, I tend to change the pointer in what ever I need.

  But if you use an Intuos I can ask someone at Wacom Europe, since I work closely with them on the Wacom InfoChannel.

  Let me know.

• When you use a tint and Saturation layer

  When you use a tint and Saturation layer I select the color picker and click on image, then the tint and disappears from the Panel properties of Saturation. I tried assorts and I can't get this to work. What I am / I've done wrong. I use Photoshop CC. Thank you.

  Hi Gary,.

  > I select the color picker >

  I think, perhaps, you mean that you select the eyedropper or Panel in the Hue/Saturation again to targeted adjustment tool (the hand with the double-arrow)? Then you click on the image and the Panel closes?

  I suspect that your panel hue/Sat is an icon in a bunch of icons. Look in the preferences under the workspace and see if there is a check mark next to the panels Auto-effondrement emblematic. If this is the case, clear the check box.

  Then you notice that the Panel will remain open while you are using the image to adjust the settings in your dialog hue/Sat box (or any single panel in a bunch of icon that is open), but he will remain as open, potentially on your way, when you go somewhere else unless you open another Panel in the same strip of icons. You will therefore need to develop the habit of clicking on a name of the Commission or the double arrow to the right to close the keyboard manually.

  I hope this helps solve your problem.

• Camileo x 400-buzz using desktop microphone and AC at the same time

  We bought this camera because it gives us the possibility of using a desktop microphone when we record interviews.

  It works very well if the camera uses its batteries, but when you plug in the AC, the sound recording is affected.

  A buzz is saved all the time.
  Have you had this problem and found a solution?

  Hello

  Have you tried another AC adapter?
  It might be possible that your adapter is defective.

• RunTimeException when you use the timer and TimerTask.

  In the switchNext() method, it changes an image and some text in a Vertical management. When I run the application, I get a RunTimeException. However, when I have not used the timer and tested the method switchNext() with just a button method worked perfectly. How can I make it work with timer or another class that he will call every 30 seconds?

   time = new Timer();
  TimerTask task = new TimerTask()
  {
  
  public void run()
  {
  
      switchNext();
  }
  };
  time.schedule(task, 10000);
  

  It would be useful to know what Exception you actually get.

  However, I think that it is indeed related to the fact IllegalStateException the TimerTask is running in the "bottom", and you try to update your User Interface.

  If you change the code as follows, it will work the method on the event Thread and so he has access to update the user interface.

  public void run()
  {
  UiApplication.getUiApplicat () .invokeLater (new Runnable()

  public void run() {}
  switchNext();

  }});
  }

  You can find more information on the event thread here:

  http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

• Photosmart 6510: By default, Photosmart 6510 printer Photo paper tray when you use e printing and airprint

  How can I get the default tray for main tray in electronic printing and air instead of photo tray? Everything is set to main tray by using the Printer Wizard. No problem when you print a document directly from the computer.

  Thanks in advance

  The HP ePrint app is available on the Apple Store. When you open the app and are looking for a document to print, you should see a few options to select the paper settings and other options before you click Print to print the document.

• When you use a left and right axis, how to choose what issed axis for the value of y GetGraphCursor?

  I use a graph with a left and right axis (2 data sets).  I try to use a slider to select a point in time (x) and the values of y in the two sets of data.  I can't understand how the control, the value that is returned for the value is when you use the GetGraphCursor call.

  GetGraphCursor (panelHandle, PANEL_GRAPH, yourCursorNumber, & x & y)

  Using SetCursorAttribute with the attribute ATTR_CURSOR_YAXIS must be what you are looking for. The online help for this attribute explains wery well:

  Description: Used to change the y-axis which is associated with the bar graph.
  When a graphics cursor is created, the Y axis with which it is associated is determined by the value of ATTR_ACTIVE_YAXIS.  Subsequently, the association can be changed using ATTR_CURSOR_YAXIS.
  The y-axis associate serves as reference for the coordinates of the cursor position in calls to SetGraphCursor and GetGraphCursor.

• When you use AI Servo and shutter continues - exposure can change?

  When capturing a sequence, as a receiver running a 50 back yard, if you capture everything with only one press and hold the shutter button - does any parameter/function that will cause exposure to change during the sequence.

  Like, suppose that you pull the short player of tunnel in the Sun and you're shooting shutter continuous - NOT - is there a way to get the camera to follow exposure in a manner similar to AF tracking?  (Other than your finger on the shutter to lift button?)  And following this thought, if you do not use BBF, if you come back to push down, AF would continue and given exposure to zero?

  The last (for now): on cameras upscale, you can set the FPS at less than its maximum speed?  As on the MKII 7 d, you have to shoot 10 or can limit you to 5 frames per second?

  Thank you.

  PajamaGuy wrote:

  Thank you... and Yes, but my question is since the exposure is calculated when the shutter is completely down, if you hold the button down to let's say 15 exhibitions (3 seconds to 5 fps), made the change of exposure when (i.e.) exhibition #1 is a heavy shadow and #10 is the light of the Sun?  Or, you have to lift and to re - press shutter to update of the exhibition?

  As long as you are in AIServo the exhibition is continually updated. (unless you press the exposure lock button).

  This article explains hjow to lock exposure as you think the camera does all the time.

  Canon DLC: Using automatic exposure (AE) lock

  To not lock exposure, just can't do the things described in the article.

  Sorry this is an average drop to explain, but, I couldn't find an article that explains to the front.

• Complete blocking of the PC that requires a difficult start to recover when you use Assistant scanner and camera when you use a peer-to-peer on a USB port connection.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello Cavman35,

  Thank you for your message.  Please provide comments to a few questions so that we can better help you get this issue resolved.
  This happens every time that you use/start the Scanner Wizard and camera?  If not, is there something that seems to be in common whenever it 'hangs '?
  Have you ever been able to transfer data using this connection, or is this a new phenomenon?
  Has anything changed since you started facing this problem?  To include hardware, software or update change.
  In the meantime, you can try a clean boot in order to eliminate the possibility of a 3rd party applications interfere with the transfer.  Click HERE for instructions to boot.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• PC crashes when you use Windows 7 and ipod synchronization

  My PC gives me a blue screen of death and crashes when I try to sync my iPod 160 GB. I use Windows 7 and iTunes 9. All my drivers are up to date, as well as my windows.

  I'm pulling what little hair I have left. Help.

  Hello
   
  You need execute the instructions below to refine the question.
   
  How do you try to sync music to the device?
  Tell us the message you get when you try to synchronize?
   
  As you've updated the latest drivers on your comoputer, I recommend you to try this issue with a clean boot to see if we can identify a program or driver causing the problem you are having troubleshooting.
   
  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:

  Clean clean boot.
   
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
   
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
   
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
   
  When you are prompted to restart the computer, click on restart.
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can you use Sage Pay and PayPal Pro

  Hello

  Is it possible to use Sage Pay and PayPal Pro on the BC system?

  We currently have Sage Pay and PayPal standard, but our client now wants to add PayPal Pro.

  Concerning

  Chris

  No, you cannot use a main and standard payment gateway paypal as an alternative.

• How do you use the step and resume for 10 indesign pages

  Hello

  I have a record for a mailing label. I have successfully used the step and repeat to create 2 columns and 8 rows for a document or a page. How to create 2 columns and 8 rows to say 10 pages with step and repeat? What you have to do with the pages?

  Thanks in advance

  You're simply trying to get additional copies of the same label? You don't want to do several pages to do, just print x pages.

  This looks like the same project of the other day. You really need to be clear about what you're doing: you said you wanted 50 copies of the same label and I told you not to worry about merging data, but maybe what you really meant you wanted pages full of the same label, but many different labels in the file. It IS a project of data merge, but you still would be implemented with stepa and repeat the process to put a series of placeholders in each position of the label, but you do only one page in the merge template. Merge all your records, one record per page, then print as many copies of the file as that required for the number of labels you need.

• error on execution of fpclose.vi when you use FP-1000 and two FP-TC-120 module

  I have an error that occur in my LabVIEW program by closing connections Point field.

  I use LV8.5 and im to connect to a FP-1000 (native RS-232 port) controller that connects to two modules FP-TC-120, under XP.

  The error I get is "error 33589' caused by 'FPClose.vi', is actually the second"FPClose.vi"that produced the error, as shown in the picture by the giant arrow. Strangely, there does appear to be an effect of the program and it runs and disconnects as should be, its mostly just bugging me.

  I can't find this error listed anywhere, I can't find a nice long list of errors.

  I have an insidious sense that when I close the FP read labels with the FPClose.VI I am actually closing connection to the PS module and therefore do not close the system as intended.

  I would be grateful is someone would instruct me as to the cause of the error, and what I should do to properly close the FP module.

  Well, I managed to get to the bottom of the problem, it was not caused by FPClose!

  Errors where of course be cascaded through FPClose and then the 'error' said that the source was the second "FP Close.vi" he did the second "PS Read.vi". The fact that the IAK was in a loop was not the cause of my problem, but it's a clear sign of poor programming!

  Error reading FieldPoint 33589 actually is that some channels are determined to be OpenLoop. In my case I had all the channels of the first bank connected to the K-Type thermocouples, but only 2 channels of the second Bank connection and so the error were raised in the second "read FP' and cascading to the second"FP close. " To consider an error is actually a misnomer because it is actually a warning and has no influence on the conduct of the program.

  I think that the original example I posted was written for LV 6.1 and FP 3.x. I updated my own example to update methods used in LV 2011 and FP 6.0.9, they run a lot smoother than the previous method. I hope this might help someone else in the future.

• Page tiles showing not when you use Adobe Muse and webmarketing accommodation

  Hello

  I created a muse site that has good page titles display in the browser when you use the bases web hosting. But I need the same site contains a blog now so changed hosting to web marketing, this has as consequence the pages not showing their page titles in the browser

  Does anyone know why this is, or what I can do about it?

  Thanks for any info

  concerning

  Martin

  The page title does not change with the change of site map, unless it is done manually, or if it is updated the file is downloaded from Muse.

  Please check the titles added to the page if they exist or not, there is always the same question, enter the url of the site.

  Thank you

  Sanjit

• Laptop crashes when you use PCI-6132 and a box of magma

  Hello

  I use a laptop with a magmabox (Cardbus connection) to accommodate a card DAQ of NOR-PCI-6132. When I'm data acquisition the laptop freezes sometimes and has to be restarted. Anyone who is familiar with such a problem?

  I did not have this problem when the DAQ card is in an office with a regular PCI slot. So, I guess that the problem is related to the magmabox.

  Nick Wagner

  Hi Nick,

  The problem could very well be linked to the magmabox, but before that can be determined, I need more information about your hardware.  I already know about the PCI-6132, but I don't know anything about your laptop or magmabox cardbus connection.  Can you tell me the manufacturer and the model number of your laptop and the magmabox so I can check their specifications? Thank you.

  Best wishes

  Wallace F.