Docking station that supports the portable and desktop connection to devices

Similar Questions

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification.

  I've seen other posts on this topic. Nothing seems to work, so I thought I would explain my situation.

  The machine is new. Win7 64 bit company. The problem I see is that I try to load some versions of Visual Studio on the new machine. However, none of the discs auto-run using my local internal DVD drive. They all have a Readme file with the message "this disc contains a"UDF"file system and requires an operating system that supports the ISO-13346"UDF"file system specification."

  I know that the discs are good, I used the on my old machine, and I can always use them on other machines I tested.

  The real kicker here is that I can plug an external USB DVD drive... and then the local drive starts to read the installation discs! It's like making this action allows something else in the machine.

  Also, I even restarted the machine mode of diagnosis (without external DVD drive attached)... and restart, the drive would read the installation discs. BUT when I do a full stop and then turn on the machine upward, the local drive gives me the same readme file. Again, it is as if something gets activated, and then reset to a complete stop.

  I am at a loss of what to check then. Real head-scratcher, because I know the drive works and the machine can recognize the drive and even read installation discs.

  I do not have the applications installed on the machine of DVD burning, so I don't think there is a conflict.

  Any suggestions are welcome.

  Thanks in advance!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums so the problems occurring on Windows 7 Enterprise.

  Forum TechNet Windows 7

  Hope this information helps.

• Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to force the lightroom Installer to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• Error message "To display the contents of the Flash technology in this PDF file, please install this version of Flash Player that supports Adobe Reader and Acrobat".

  I converted MS-Outlook 2010 e-mail folder (and emails) into a PDF portfolio. When I have Adobe Reader X R-clicked, selected, I got and error message "To display the contents of the Flash technology in this PDF file, please install this version of Flash Player that supports Adobe Reader and Acrobat". I get the same msg when I try to open it with Acrobat. He worked the week last in Adobe Reader. I have the latest version of Flash Player installed. The portfolio opens when I click on < more >, but the Index is missing and I can't get to the first email. PC platform. Anyone else having this problem? If so, how to fix?

  You are running Internet Explorer by chance? If so, the Flash Player you have is NOT in need of Adobe Reader and Acrobat. If there is a link in the message, use that, rather than assuming that you already have Flash Player. If this does not work, let us know.

• I bought 13 PS elements and did not know that the Windows Vista operating system is not supported by this version.  How can I exchange the PS13 bought for a version of Photoshop that supports the Windows Vista operating system.

  I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported.  How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?

  Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.

  Please see return, cancel or Exchange an order - Adobe

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• My space Icloud is used because of the backup of the Ipad and I use three devices under ID so my iphone always gives the warning of small footprint. How can I save the back upward on my PC so that I can delete of I have cloud and free space

  My space Icloud is used because of the backup of the Ipad and I use three devices under ID so my iphone always gives the warning of small footprint. How can I save the back upward on my PC so that I can delete of I have cloud and free space

  Hello

  You want to know is explained here: https://www.apple.com/support/iphone/backup/

  If you want to delete the backups that are currently clogging up your iCloud-storage space, use this: iCloud: delete a backup device iOS to iCloud

• Can I upgrade my laptop of HP ENVY 17-j092nr a wireless card that supports the 802.11ac?

  I have a HP ENVY 17-j092nr Notebook PC with the wireless stock card.  Is it possible to upgrade the card to one that supports the 802.11ac?

  Mikeeeyy wrote:
  

  I have a HP ENVY 17-j092nr Notebook PC with the wireless stock card.  Is it possible to upgrade the card to one that supports the 802.11ac?

  Hello

  This model series is not the whitelist and you can use virtually any desired wireless card. Intel 7260AC for example...

• If I buy the creative cloud for photographers can I install it on the laptop and desktop?

  If I buy the creative cloud for photographers can I install it on the laptop and desktop?

  As long as the machines support the software you can.  A Cloud subscription allows you to have two machines with operating facilities.

• What is the maximum size of the image (in pixels) a height that supports the Muse? I noticed that if the photo is too high, reduce the Muses. Thank you

  What is the maximum size of the image (in pixels) a height that supports the Muse? I noticed that if the photo is too high, reduce the Muses.

  Thank you

  If you place an image with a height or width greater than 2048 pixels - in Muse - Muse will scale the image down proportionately, limiting the larger size to 2048.

  However, if you want to use the picture to its original size, you can move the image to the desired size by dragging handles to resize, or by entering values for height and width in the strip control on top. After that, go to the active panel and locate the image, then right-click on this image in the active panel and choose "import of large size. Which would bring the image lost the original image information.

  Hope that gives you clarity on what you wanted to know.

  See you soon,.

  Vikas

• Error "could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  How do I solve this problem

  "Could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  It turns out that a Windows computer has been infected by a virus that worked its way to the server. We zapped the virus and restore the backup files.

• I'm trying to export contacts as vcards icloud.  However, after that select the contacts and click on "Export as vcards" nothing happens.  Why?

  I'm trying to export contacts as vcards icloud.  However, after that select the contacts and click on "Export as vcards" nothing happens.  Why?  I tried this using edge and chrome and I run Windows 10

  I just tried with edge on Windows 10. I selected all the contacts, and then click Export, as vCards and nothing happen. Clicked on it again, still nothing. After 4 or 5 click on about 10 to 15 seconds he finally uploaded to the file Edge uses for downloads. I saw it happen before you go to a Mac using the Safari browser, but only 2 clicks were necessary.

• Sort the listBox that contains the text and numbers

  Is there a script to sort a listBox control that contains the text and numbers using a button?

  I would have preferred that he sort 1, 2, 10, 20, 100, not 1, 10, 100, 2, 20

  Examples are part numbers: HP1457100-9, 011-2025-479, 85216, etc.

  You may need to change this line:
  oTarget = this,

  It refers to the object to display the results.

• O2 dongle is never to step of the password and then just says device not detected / found

  Original title: im trying to use my o2 dongle to connect to the internet, but for some reason some he used to let me...

  Ive connected the dongle and it goes through the normal treatment it says connection. However, it's never at the stage of the password and then just says device not detected / found

  Hello

  You can try to reinstall the USB controllers and check.

  a. Click Start and type devmgmt.msc and then click OK.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the device to see if it works.

  You can also consult the following link:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information is helpful

• I have no sound. All the updates and driver controls show "device working properly.

  All the updates and driver controls show "device working properly. When the sound icon is clicked - I see the sliding green scale showing "audio output". I also see the green bar moving on 'Realtek HDMI output' and it is marked as default. Our sound stopped suddenly without reason is apparent. Any help is appreciated.

  When I go to check microphone/video on attached USB camera/mic - I see the two audio and video movement for this device. The computer makes the numbers / noise I just can't hear it.

  Realtek High definition driver is 6.0.1.5789.

  Change the sound Realtek HD audio no audio HDMI