Document Conversion problem

Similar Questions

• FDK - apply document Conversion table

  Hello

  I want to be able to apply a conversion to an open document table, through an FDK.

  Is it possible to call the command "Structure current document...". "the client and pass a filepath, open the document Conversion table, and that applies to the current document?

  I want to be able to pass the path to the command automatically without displaying the dialog box.

  I appreciate any help!

  Thanks in advance,

  KFN

  Hi David,

  Yes. It is in the chapter of the FDK ref called "Call Clients shipped with FrameMaker." The table of conversion process is done by another client API called generator of Structure, and you will need to make calls to it. However, in the last ref FDK I, I think that the syntax in the documentation is wrong. I'll copy and paste parts of the device below, replacing it with the syntax that I know works. Note that you must have all documents open with their identity papers seized... you can't just send a path.

  To perform most operations with customers of FrameMaker, you perform a sequence of several
  Calls F_ApiCallClient().

  To structure a document, use the following sequence of calls from F_ApiCallClient():

  F_ApiCallClient ("Structure Generator", "INPUTDOCID objectID");
  .. .or objectID is the ID of the input document.

  F_ApiCallClient ("Structure Generator", "RULEDOCID objectID");
  .. .or objectID is the ID of the document table rule (conversion).

  F_ApiCallClient ("Structure Generator", "OUTPUTDOCNAME path");
  .. where path is the full path of the output document. This command is optional. If you do
  not specify a path, the leaves of the unsaved document structure generator and open.

  F_ApiCallClient ("Structure Generator", "StructureDoc");
  ... This call tells the structure generator to generate the structure using the parameters provided by the
  calls listed above.

  KFN, is again Russ. Thus, for example, to make the call where send you the number of the document that you want to the structure, you would do something like:

  UCharT msg [1024];

  F_ObjHandleT docId.

  ... code for docId, etc...

  F_Sprintf (msg, "%d INPUTDOCID", docId);

  F_ApiCallClient ("Structure Generator", msg (StringT));

  ... rest of calls, etc...

  I hope this helps.

  Russ

• Since last week, I have a PDF to WORD conversion problem.  All the documents, I have try to convert room conversion failed.  What is going on?  Thanks in advance and I look forward to hear from you.

  Nice day
  
  Since the last week I'm trouble conversion PDF to WORD.
  
  All documents I try to convert room conversion failure.
  
  What happens?
  
  Thanks in advance and I look forward at the hearing of your.

  Hi prates77,

  I'm sorry to hear that you are experiencing problems, file conversion. You receive a conversion error, regardless of the file you are trying to convert? The error occurs if you use the web interface, or convert by the reader? And a strange question: how many files you have stored in your Acrobat.com account? We have seen reports of this error when there are a large number of files stored in the folder root your Acrobat.com account.

  I can't wait to hear back on your part.

  Best,

  Sara

• FrameMaker has a pdf to PS conversion problem?

  Hello

  When I create a Framemaker .PS file, when the progress bar reaches a page with a .pdf file, it crashes.

  FM has a problem of conversion of pdf pages, or should I leave it overnight to work it's magic?

  FWIW, FM creates internally an EPS of a PDF document using the same routines that Acrobat and the EPS format that passes through on the FM output to a postscript file. If the process takes long ime, check that you have a lot of space in your system TEMPERATURE zone and that you have a specified large swap file. (You don't mention how much system memory/RAM you have available.) In addition, you should have an instance of Adobe PDF printer as your default system you.

  You might be better to create an EPS of the PDF in Acrobat and who put on the FM for FM band does not have to do work on it.

• String to number conversion problem

  I have a VI that pulls in data from a device using VISA, and I got it on another computer to work a few weeks back. I had to transfer the VI to a laptop computer to run a few tests, and now I can't make it work. I am unable to put my VI because the laptop on it's is unable to access the network companies, I will do my best to explain it all, I apologize for the inconvenience! My problem is not however with VISA, it's with an exit VISA number conversion chain.

  I have attached a painting drawing of VI to better explain it.

  I use the block series Visa football match in baud rate and all that many good things to the unit and port settings set of device management. Then, a while loop is entered. The loop will run until you press the stop"" button. The next block of visa is the writing block, he asks for a reading of the device. The next block of visa is the first block of reading, he returns playback in the form of "NA-XXX. X' where x are numbers. The next block of visa is the second reading block, this block just echoes back the command sent to the device. Playback of the first visa read block, "NA-XXX. X' is going exponential/fractional chain to digital converter.

  When you perform a run/debug to highlight run, the release of visa reports the correct value, is the value of the device reading - however the string to number converter generates a 0,000, no matter what channel number is. I am at a loss as to what may be wrong because it's the EXACT set up I had to work very well a few weeks ago!

  I'm using Labview 10 on the laptop, the old computer was labview 7. I'm guessing that this is perhaps the rub... I Redid the VI from scratch, although I have not opened the old VI in labview 10.

  Any help would be appreciated. Again, sorry I am unable to attach the VI.

  DARB wrote:

  I have attached a painting drawing of VI to better explain it.

  Would it not have been easier to just post a screenshot? You might also have used the Tool of Capture of Code. (Which reminds me that I need to install it to my previous versions of LabVIEW, as evidenced by the screenshot I took. )

  As to the question: you probably either:

  • employee analysis of chain initially and when you rewrote the VI you used the regular string conversion functions.
  • Wired an offset value in the string to the number function.

  

• CRIO-9066 FIFO data conversion problem

  I'm having a problem with a multiple element SGL FIFO on a cRIO-9066 where data is not read correctly.  Here is the configuration:

  I have two Host - to - Target FIFOs, identical except for type: FXP is the other SGL.  Both are 16-element.  Data SGL which are read turns a conversion error.  A sample minimum (2014 for the 9066) project is included.

  The example works fine if the FIFO SGL 1-element; something more big fails.  Is not supported on the same 9066 thought that the project allows the creation?

  Thank you

  David

  It seems that maybe it's a bug in the Simulator.  Exit the simulation mode, run it on your target and watch the interactive mode in this way.  The results are what you expect.  It is strange that they would be converted at some point.

• HP Office Jet Pro 8610: Document Feeder problems

  Today when you try to scan from Adobe Acrobat, the charger does not work.  It does not work when you scan directly from the printer control panel.  I ran HPSSdr, but that did not fix the problem.  The connection to the priter is wi - fi.

  Please provide detailed information @Doug34.

  I have provided a document to have problems scanning by using the Adobe software that can help.

  • Problems scanning scan using Acrobat.

  You can also try using a different, just user account if the user account is damaged.

  I suggest you uninstall the Adobe program and then reinstall it to see if the problem persists. If you still have the same problem, you need to contact Adobe technical support.

  Let me know how make you out. Thank you!

• XPS document viewer problem

  When I try to view an XPS document, the viewer opens a blank document page and continues to open the pages of an additional blank document.

  Thanks Vijay.

  I think I found my problem.  Google Chrome seems to interfere with the XPS Viewer.  I uninstalled Chrome and the problem seems to be resolved.  Again, I can view XPS documents.

  Mike

• Disqualification: Date conversion problem

  Hi all

  For some reason, it turns out that which was built as 00:30:15 (HH) will be automatically converted to 12:30:15 (HH) as string value. See screenshot below.

  

  Tried several things in the reference list of date format, but no resolution yet. How can we avoid this conversion?

  Problem has been resolved:

  Under two date formats have been contradictory:

  DD/MM/YYYY HH: mm	23/01/2014 12:30
  DD/MM/YYYY HH: mm	03/01/2014-10:10

  Deleted the premiera and dates are converted correctly now.

• the date conversion problem

  Hi friends,

  I have a problem with the conversion of the date in my PB.

  SELECT eff_dt, TO_CHAR (TO_DATE (eff_dt, 'Dd-mon-yy'), 'dd-mm-yyyy') DATE from une_table;

  It gives me o/p as -.

  DATE OF EFF_DT

  01.01.1950 00:00:00 01/01/2050

  as you can see here the year is wrong, while I convert the date that I use the substr() also to cut the year of first line, but it gives me the 50 i.e. onle last (YY)

  So, if someone can help me with this prob.

  If eff_dt is a column DATE, then stop calling to_date on it.

  If this is not the case, consider making it into a DATE column. If you are unable to do this, use the format mask appropriate when you call to_date

• Window to open the Illustrator document resize problem

  I'm having a problem with whenever I go to file/open or file/new model, the open window to select the file you want to open always resizes in a small window (as seen in photo), cut the rest of the information and documents, I drag the corner to enlarge resize so that all the information is visible , but the next time I open a new document, it shrinks down. It is very annoying especially when I'm busy and the opening of several documents. I searched on google looking for similar problems and everything I find solutions on the change of the overall size of the application window. I also searched all of the preference settings and there seems to be an any setting that I can find. I know that in previous versions of Illustrator when this happened, I drag the corner to enlarge the window and Illustrator would remember the size. Have they changed something, and I'm the only one who is upset? HA I highly doubt.

  Thanks for any help!

  

  Hello

  I was able to reproduce the same thing at my end and I report to the engineering team.

  Thank you

  OM

• The Illuminant C for a printed document conversion: D65 or D50?

  I have a few old color data of the 1930s which is expressed in coordinates using Illuminant C. I need to reproduce it in the swatches in a document for offset printing, I'll prepare you using InDesign. I can convert the coordinates in the LABORATORY using software. However, this requires that I replace C Illuminant D50 or D65. D65 is the match more closely to obsolete Illuminant C. But this project is intended for production printing, where it will be considered in a light booth D50. I have also been informed that the Adobe color engine also assume D50 for everything.

  Are there management settings of colors that I can use to preserve the appearance of the conversion of C to D65 somehow? Or should I accept the inevitable and convert directly from C D50?

  Important is the concept, either A or b:

  (A) a set of tokens is observed under illuminant C and the colors are represented by XYZ or xyY.

  A set XYZ sets a color absolututely, there is no need of a white point.

  In this case, the calculation is simple for reason x, y, y:

  z = 1-x-y

  X = xY/y

  Z = zY/y

  X 1 = X/Xn etc.

  next page 4 here:

  http://docs-Hoffmann.de/cielab03022003.PDF

  Xn, Yn, Zn is the D50 white point. In CIELab, it is just a reference, of course

  referring to expected conditions of the printed product vision.

  (B) a set of tokens is observed under illuminant C and the colors are represented by XYZ.

  How would the same chips look if they were read under D50? What are the new XYZ values?

  It is a question of color appearance. At the present time, I think that this is not your actual task,

  Therefore, it is not said.

  The CIELab values for Munsell colors are for example here, if that is important:

  http://docs-Hoffmann.de/munsell15052009.PDF

  http://docs-Hoffmann.de/munsell15052009-AbsCol-NoBPC.PDF

  Cordially - Gernot Hoffmann

• RedHat4 conversion problem

  Hi guys,.

  I convert a server Linux Redhat 4, and it gives me problems. When I start the wizard, select a remote computer, powered, he know "a general error has occurred: uninitialized: converter.info.StorageInfo storage.volume.diskId. Unfortunately, it is not all that useful to understand what is happening. My log files are included. Any suggestions to what is happening?

  See you soon

  Nik

  I'm guessing it's because you have volumes that are mapped directly to complete drives, instead of create a partition to contain the volumes.  It is not supported by the converter at the moment, please see the release notes:

  http://www.VMware.com/support/converter/doc/releasenotes_conv401.html#84

  You could try to remove those file systems that are mapped directly on the hard disks (/ storage/data_01, etc.), and then try to restart the Conversion.  After that it's over, you can add new disks on the virtual computer and just copy the data of these file systems that you have ignored.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• Conversion problem 8i to oracle 11g database timestamp

  Hello
  I have an interface that migrates data from 8i to Oracle 11 g server. I use ODI 10.1.3.5 version for this migration.
  When we try to send the timestamp from 8i to 11g, time stamp values are coming as parag 00:00:00.
  I tried almost all the functions of conversion posible as to_timestamp (tochar(field,format), format).
  The above mentioned is the last conversion I used which is insert 0 in the timestamp.
  Please let me know the resolution if someone has experienced the same problem.
  
  Thank you
  Naveen

  Hello

  Maybe you can try with this...

  Add a topology for the JDBC url property.

  Key = oracle.jdbc.V8Compatible
  Value = true

  Thank you
  Fati

• IMAQ JPEG image conversion problem string

  Hi, I'm using the format JPEG decode VI to decode an image string I get a camera at Black fins. It works fine when I run VI himself, but when I use it as a subvi the program crashes. Anyone have advice?

  This is a picture of my program

  

  It's the way the file is returned to the camera

  'I '.

  «#IMJxs0s1s2s3...» »

  Enter the JPEG compressed video image x = size of the frame in pixels: 1 = 80 x 64, 3 = 160 x 120, 5 = 320 x 240, 7 = 640 x 480, 9 = 1280 x 1024 s0s1s2s3 = size of the image in bytes (s0 * 256 ^ 0 + s1 * 256 ^ 1 + s2 * 256 ^ 2 + s3 * 256 ^ 3). ... = full frame JPEG Note that sometimes the 'I' command returns nothing if the robot camera is busy, then the 'I' command should be called as many times as necessary until a framework is returned

  I changed the format JPEG decode VI by changing the plans of red and blue color. I don't know if this caused the problem though.

  Hello

  This can be useful for you:

  http://forums.NI.com/NI/board/message?board.ID=200&message.ID=21845#M21845

  Andrey.