Document PDF and Surface pen

Similar Questions

• View the problem with PDFs and the pen

  Hello

  I have a new Pro and that you have not installed an important apps or new software.  I can use the stylus to write on a PDF using PDF viewing software provided, and that works a treat.
  I can even e-mail the PDF file with the ratings on which can be seen by the recipient too.  Great stuff, really very useful.
  BUT if I then open the PDF saved again on the surface, I get a load of rubbish where writing should be.  Random blocks of graphics.
  I restarted the surface and closed the PDF and opened it again, with the same result.
  I had downloaded the PDf noted to a Web site also, so I deleted the cache using disk cleanup, and who did not make a difference
  I have the PDF file and a screenshot of what I see on the surface, which I can download also.  But the PDF has confidential information, so I need be sure, that it would not be played on a public forum.
  The list of topics below is not really a relevant drop-down be...
  Thank you
  Dave

  A recent MS update hassolved the problem that I see...

  
  Dave

• Boxes of documents PDF and InDesign page

  Hello

  I noticed that for small page in PDF file formats, I pulled out of InDesign CS4 text information of the page is placed below the crop marks and therefore, if I only check "Crop marks" and the "Page information" options, the media boxes and cultures are eccentric with other page boxes (in fact that both boxes seem to be still a bit eccentric) (even if the color bars are added above the crop marks).

  With respect to the taxation of labour, I would like to know if this asymmetry could be considered a mistake or causes of the problems.

  Thank you very much

  Giordano

  With the modern institution, the inclusion of the crop marks is unnecessary. Your pdf pages will be placed compared to either purge or topping.

  . bleed 125 "is common, but some providers require only que.0625. The imposed real leaves will include notes of necessary toppings as agreed by the plant to the task.

  No commercial plant I work with, or work in my plant, request information on the document page.

  The colored bars have even less use in a real production environment.

  I've had salesmen cultures and request info page DO NOT appear, perhaps for the reason you mention. Any imposition of (a bad idea) bounding box would be compensated for the actual document Center.

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• Causes of puppet Warp and document to go black pen tool... is there a solution?

  I use Photoshop CC 2014.  When I Zoom and am using the pen tool, after several anchor points, the document will go black, and I don't see what I'm doing.  If I hit ctrl + Z, I can get the document to return, but usually, I can't add more points to the path.

  Today, as he tried to go to puppet Warp, after the mesh that stood, I tried to choose an anchor point.  When I did, the document became black, and I couldn't perform all the steps without trying to close completely off PS when I did, I was given the possibility to apply the filter.  When I chose to not apply puppet Warp, the document returned, and I cancelled to leave the program.

  Now, however, when I try to go to puppet Warp, the document will go black, and the mesh is even more will appear.  I have PS set to run a little on the 'ideal' memory range running.  I closed and open PS several times.  I have 306,94 MB of free space on my drive from Scratch.

  I use an Intel HD Graphics 3000 on Microsoft Windows 10.  My processor is an Intel Core [email protected] GHz, at 2095 MHz speed.

  I searched everywhere, but am unable to find information on these exact issues together.  What I found similar was the issue with the tool pen to varying degrees.  Most of these people received information that it is due to run PS CC 10 Windows.  Does anyone know a work around for this problem with limited specifications I provided?

  Thank you for your time.

  We pay every month for Photoshop... it gives me not an automatic update? I didn't know about that one.

  You can install all the update using the application desktop cloud creative to do.  Your better off that updates are not automatic. Adobe allows has a lot of bugs to be released.  You're better off waiting to hear if the new update are good or not.  You should always keep an old working version of Photoshop installed for insurance.  You must use the installation of Adobe Photoshop options ahead to keep older versions of Photoshop to uninstalled by new version installers.  Adobe management must have brought the previous version uninstall a default value.  I don't think programmers who would do to users.

• When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. What this means and how do I continue to Word so I can edit pdf

  When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. -What this means and how do I continue to Word so I can change the pdf document?

  Hi wayned76005641,

  You subscription Adobe export to PDF, make sure that you are signed in DC from Adobe Acrobat Reader Adobe - Adobe Acrobat Reader DC Distribution using your Adobe ID to use the service to export it to PDF service The Adobe export in PDF format allows you to convert a PDF to Word, Excel, PowerPoint and RTF formats..

  You can also use this online https://cloud.acrobat.com/exportpdf service

  Once the PDF is converted .docx file you can edit in MS Word.

  Kind regards
  Nicos

• Is it possible to create a document merge pdf and mailing to several vendors (each with their own unique values) for them to individual e-sign?

  Is it possible to create a document merge pdf and mailing to several vendors (each with their own unique values) for them to individual e-sign?

  I have my letter and the data that is created in Excel and Word, so I want to create these data in a mail merge (by Word) and then saved in PDF format.

  I wish that each document merged PDF mail to have their signature / title / name of fields as fields of e-sign.  Is this possible? How can I configure my document as well what happends without me one in and edit every PDF document.

  Thank you ~.

  Hello Gallienterprises,

  It seems that you are looking to extract the values of your CSV file in the document of the multiple signatories. For this, you can use the MegaSign feature:

  https://helpx.Adobe.com/content/help/en/document-cloud/help/sending-megasign-using-CSV-fil.html

  Let me know if you need more information.

  Kind regards

  -Usman

• I want to extract information from the same input field in multipal PDFs (created using document pro) and export them to an excel file. Is this possible? If this isn't the case, Adobe seeks to make this project a reality.

  I want to extract information from the same input field in multipal PDFs (created using document pro) and export them to an excel file. Is this possible? If this isn't the case, Adobe seeks to make this project a reality.

  -Extract all data from a single file can be done via the tools - forms - more form Options - export data...

  -Extract some data from a single file will require a script to measure.

  -Extract all the data from multiple fields in a single file can be done via the tools - forms - more form Options - merge data files into spreadsheet...

  -Extraction of data from several files will require a script Custom Action, as I've written before.

• You can edit a document template in your library (pdf) and retrieve previous form fields, so you don't have to start from scratch?

  I've just uploaded a pdf template in my library and spent a lot of time to fill the form fields. However, after completing the achievement, I made a misspelling on the original pdf model uplaoded. Is there a quick way to upload the document again and copy the older form of the document field so that I don't have to start from scratch?  If someone is able to inform you that would be much appreciated.

  Only if you checked create layer for the form field option when you create the document in the library. (Available only in the accounts of end superiors so that you won't)

  If you have Adobe Acrobat you can add fields from the agreement to the PDF outside eSign services.

  Or if you are using word documents, it is possible to add fields of the agreement using text tags.

  With those you can change regardless of the document and download the new copy and that the fields are already there, no need to copy or redo them.

  Document help Cloud | Form creation | eSign services

• I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  It works very well.  Use the screening of high printing quality, but think about what resolution for your graphics card.  In fact if you have higher res images online versions, you can hot link to them from the PDF file.  I used to publish a magazine of the club until a couple of years, and while I've used InDesign, output to PDF format was exactly the same process

  http://www.marlboroughcameraclub.org.nz/photo-news/Arti/photo-news-2013/

  If you want to go one step further, take a look at this example, which uses the SWF to the page turn effect

  http://www.f11magazine.com/current.html

  I assume that your document is a good single page?  Photoshop is a clumsy tool for multi-page documents.

• My pdf reezes when I click on COMMENT. I'm trying to get the tools to edit a pdf file. If I use the tools on the toolbar, there is no problem, but as soon as I click on the COMMENT, the document hangs and I have to open the Task Manager to plant it. It st

  Sorry, I'm new to the type of problem-solving process, and I don't know how to change my first speech. My true statement is less to:

  My pdf freezes when I click on COMMENT. I'm trying to get the tools to edit a pdf file. If I use the tools on the toolbar, there is no problem, but as soon as I click on the COMMENT, the document hangs and I have to open the Task Manager to plant it. It started in the last seven days (3.31.15).

  I responded to your questions below, BUT while I was looking for properties, I found repair service REPAIR the INSTALLATION of ACROBAT, and (this is) the issue has been resolved!

  Thanks for making me look for information.

  Karen

  I use Acrobat Pro XI, version 11.0.10.32.

  I created the file, that I worked in during the freeze, so I tried a PDF I created with Adobe and it also freezes when I click on COMMENT. I discover that the OBSERVATIONS of the plug-in is loaded. (See image

  I used the REVIEW for years without this problem occurring. He started in the last 2 weeks.

  I could not find real estate under the file menu, but found a security setting in the preferences in the Edit menu. It doesn't have a way to allow/disallow COMMENT.

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• How to convert merge documents and mailing for the docs individual pdf and each with a field record in the merge?

  How to convert merge documents and mailing for the docs individual pdf and each with a field record in the merge?

  What is an actual field or just a piece of static text somewhere? Whatever it is, you can't do this using the Split Document command. You will need to use a script custom read the value of this 'field' and use it during extraction of pages in the file.

• HP OfficeJet Pro 8710: Scans PDF and editable text will not save

  When I scan a document to searchable PDF or won't save a resulting file to editable text (OCR).

  The error message says "The Application from HP could not save the file to the specified location."

  I tried to save in various different locations with the same result.

  I can save other formats including PDF and normal images.

  Hello

  Right click on the start icon and select programs and features.

  Locate the I.R.I.S OCR application and uninstall it.

  Then download and run the latest drivers for your printer below:

  http://ftp.HP.com/pub/softlib/software13/Printers/OJ871/OJ8710_Full_WebPack_1881.exe

  Once the installation is displayed, close the specified window.

  Then, right click the button start and select run.

  type %temp%, and then press OK.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the optional folder.
  Right-click on IrisOCR.msi (Windows Installer), then choose install.

  Once this is done, open the HP software and try to scan the image, you can see any difference?
  
  Kind regards
  Shlomi

• QuickLook in PDF and JPG broken

  My OSX completely patched 10.11.3 system simply ceased to display previews of PDF and JPG files in the Finder.  Instead of the expected picture, all you see is the ASCII representation of code files.  In addition, Finder was hung a lot, who need to leave me it manually.  Previews of other types of files such as Word documents are very well.

  I rebooted in safe mode with the same result.  I cleaned the cache, repaired permissions, deleted the files in finder preferences and quicklook in each folder preferences (I used the terminal to make sure).  I see no errors in the console complain of bac sand and quicklook (see below) and it seems that spotlight also has problems.

  If I click on the "Open in Preview" button on the quicklook window then I don't see the exact content of the file.

  How can I fix?

  See you soon,.

  03/01/2016 10:01:59.034 iconservicesagent [358]:-[ISGenerateImageOp generateImageWithCompletion:] has no image descriptor composit of < ISBindingImageDescriptor: 0x7f8d28402ba0 >.

  03/01/2016 10:01:59.034 quicklookd [690]: error returned by iconservicesagent: (null)

  03/01/2016 10:01:59.126 iconservicesagent [358]:-[ISGenerateImageOp generateImageWithCompletion:] has no image descriptor composit of < ISBindingImageDescriptor: 0x7f8d2851c510 >.

  03/01/2016 10:01:59.126 quicklookd [690]: error returned by iconservicesagent: (null)

  03/01/2016 10:01:59.212 iconservicesagent [358]:-[ISGenerateImageOp generateImageWithCompletion:] has no image descriptor composit of < ISBindingImageDescriptor: 0x7f8d2851c310 >.

  03/01/2016 10:01:59.212 quicklookd [690]: error returned by iconservicesagent: (null)

  03/01/2016 10:01:59.365 iconservicesagent [358]:-[ISGenerateImageOp generateImageWithCompletion:] has no image descriptor composit of < ISBindingImageDescriptor: 0x7f8d29804540 >.

  03/01/2016 09:56:56.747 QuickLookSatellite [691]: could not get the extension of sandbox for path=/Users/wayne/Library/Caches/com.apple.quicklook.satellite. Errno:1

  03/01/2016 09:56:56.749 QuickLookSatellite [691]: could not get the extension of sandbox for path=/Users/wayne/Library/Caches/com.apple.quicklook.satellite. Errno:1

  03/01/2016 09:56:56.751 QuickLookSatellite [691]: could not get the extension of sandbox for path=/Users/wayne/Library/Caches/com.apple.quicklook.satellite. Errno:1

  03/01/2016 09:56:56.770 QuickLookSatellite [691]: CGSConnectionByID: 0 is not a valid login ID.

  03/01/2016 09:56:56.770 QuickLookSatellite [691]: invalid connection ID 0

  03/01/2016 09:56:56.776 QuickLookSatellite [691]: CGSConnectionByID: 0 is not a valid login ID.

  03/01/2016 09:56:56.776 QuickLookSatellite [691]: CGSConnectionByID: 0 is not a valid login ID.

  03/01/2016 09:56:56.776 QuickLookSatellite [691]: CGSConnectionByID: 0 is not a valid login ID.

  OK, so I solved this problem:

  I found the following in the console while controlling and trying to preview the files:

  03/01/2016 10:22:16.604 QuickLookSatellite [986]: [qlinfinite] generator Registered CFBundle/CFPlugIn 0x7fd00a010f10 < /Users/wayne/Library/QuickLook/QLStephen.qlgenerator > (bundle, charge) of type com.apple.quicktime - film

  03/01/2016 10:22:19.068 QuickLookSatellite [986]: [QL] using too MB memory (1947), hit the critical threshold (120Mo), leave immediately to clean.

  03/01/2016 10:22:19.131 com.apple.xpc.launchd [1]: (com.apple.quicklook.satellite.6F0C9EA2-CE2F-4B06-915F-5E6FB7411ADA [986]) Service was released due to the signal: killed: 9

  03/01/2016 10:22:19.196 QuickLookSatellite [1002]: [qlinfinite] Instantiated plugin in host with the identifier com.apple.quicklook.satellite

  03/01/2016 10:22:19.196 QuickLookSatellite [1002]: [qlinfinite] found 46 generating system

  03/01/2016 10:22:19.199 QuickLookSatellite [1002]: [qlinfinite] generator Registered CFBundle/CFPlugIn 0x7ff6c0c38280 < /Users/wayne/Library/QuickLook/QLStephen.qlgenerator > (bundle, charge) of type com.apple.quicktime - film

  So I found and deleted the QLStephen.qlgenerator and all of my insights and QL are back to how it should work.