Does anyone know why an edge 95 MXP will call himself?

I have an Edge 95 MXP and call himself all the time... the call is a SIP call of [email protected] / * /a call of 64K and the IP address. I don't have the power off because it's in the ceiling.  The unit is also recorded as a 3rd party endpoint call Manager 10.5... The unit can make calls at our other fine video devices. I had to set the unit to auto-answer, so it does not sound at all times.

Usually, it is because your getting analyzed by applications such as SIPVicous tent identify opportunities for exploitation of circuits on UDP SIP PSTN.

In general, this risk is mitigated by closing the firewall ports for the endpoint or by making a few changes to its configuration.  On a codec of series C, EX, SX, MX running TC software that is easy, but I do not know the equivalent commands (if there is) for a codec MXP.  However, you should be able to block the scans that cause this by closing the port UDP 5060 if the codec is open on your firewall.  If she goes by a gatekeeper as a VCS server you could disable UDP, I do not know CUCM.

This has been asked several times, do a search in the forums for "100 @" found the following results, although they all have to do with a series C or VCS codec, but it's all the same question.  The unit is publicly accessible via the internet, it's just a matter of closing or adjustment of the endpoint configuration or call control server.





Tags: Cisco Support

Similar Questions

  • I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

    I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

    You have to ask Apple why the design has changed. You should still be able to delete songs by changing your selection of synchronization and synchronize.

    Or you can delete songs directly on your iPad and other iOS devices, directly in the music app or via settings > general > storage & use iCloud > storage management > music

  • Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site IM on?

    Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site.
    I have the latest additon of firefox and only noticed this today... so not after I've updated, the name of the site appears if I move the mouse over the tab but it flashes and will not stay there, I can't seem to find a way to get the site back on the tab name... Help please!

    Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If this isn't the case, maybe an addon intrudes here or there is a problem with hardware acceleration...

    Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  • Does anyone know why I would double in pictures pictures that vary considerably in size? Who is the likely cause?

    Does anyone know why I would double in pictures pictures that vary considerably in size? Who is the likely cause?

    If you see this by snooping directly in the photo library file, are not!

    Photos is essentially a database program. The one and the only way to manage images in the library is via the interface of Photos, or you will corrupt the database.

    In addition to store the original files (if you do not ckoose to keep a local library optimized), pictures also maintains smaller, miniature to speed up the loading of the different images.

  • Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

    Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

    I tried to provide screenshots - insert an image does not accept.

    Just happened while the iMac was asleep.

    Thanks in advance


    The image seems to reflect the possibility of problems of graphics processor.

    Some models had a history of failure or bad solder connections. others may

    have a combination of capacitors & other materials; Finally we have to fix. + 24 - anomalies graphics + 2008 + in +& t = ffsb

    One of the remedies for a graphics card problem, is a re - weld made by the

    users who have taken their card from the computer & their cooked in the kitchen oven.

    This idea has worked for some; You may be able to contact an authorized Apple

    Service provider or see if any of the parts suppliers in line can answer questions

    availability of replacement given to nine graphics cards, if you were

    can be removed from the logic board or if it is affixed, or welded to the card.

    An repair guide for your series of iMac (Intel-processor 2008) 24 inches

    can show that if that article can be virtually eliminated, if if will show process.

    The details of the computer in the bottom of your post isn't an iMac G5 model, and

    There is no powerPC G5 processor equipped Macs after late vintage

    2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

    and would be a model of Intel. They use a different architecture than G5

    powerPC even though in some respects are similar at least in the General design.

    This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

    If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

    Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

    the Visual problem on the screen; an underlying hardware problem is a likely cause.

    • Reset the management system (SCM) controller on your Mac - Apple Support

    • How to reset the NVRAM on your Mac - Apple Support

    If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

    Introduced April 2008

    Abandoned March 2009

    IMac8, 1 model identifier

    Model number A1225

    EMC 2211

    MB325LL/A order number

    First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

    You may be able to find the numbers of reference and research for replacement new or repaired

    old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

    It failed due to a graphic processor; where she lived the BestBuy did not fix

    She even if it has been purchased by them with their extended warranty; No applecare.

    So, there are some out there in almost perfect condition, but not fixed, always.

    Do not know if the charges involved would be the value relative to the other

    later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

    Sorry I don't have any new ideas regarding this problem.

  • Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

    Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

    The white flash indicates logic receives an order of what it can not do... Its like a visual error msg.

    I suspect a device connected to your Mac sends an error msg... or even your keyboard typing accidentally pressed causes the white flash error...

  • does anyone know why my Security Center can't turn on the only show a message (windows Security Center cannot be started)

    does anyone know why my Security Center can't turn on showe just me a message (windows Security Center cannot be started) what can I do for this?

    If someone help me I thank a lot.

    Hi belizariocruz cruz,.

    ·         You receive an error with the message code?

    ·         What is the operating system installed on the computer?

    This problem may occur if the Security Center service is not configured to run under the Local Service account, but the dependent services are configured to run under the Local Service account.

    Note: The following can be used for Windows Vista and Windows 7.

    Method 1: To resolve this problem, make sure that the Security Center Service and all its dependencies are configured to run under the Local Service account. Set the center of security and its dependencies services to run under the Local Service account.

    a. Click Start, type services.msc and press to enter.

    b. double-click Security Center, click on tab log .

    c. Select "this account" click on the Browse button, type Local Service and click ok.

    d. type the password and confirm the password and click ok.

    Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.

    Microsoft Safety Scanner - free online tool for PC health and safety

  • Does anyone know why when I run Defender and he finds a Trojan horse, and I try to remove it, it begins to make then after some time the computer stops

    original title: Defender

    Does anyone know why when I run the defender and he finds a Trojan horse, and I try to remove it it starts to do then after some time the computer stops and when I restart it Defender always tells me there is a Trojan horse and the same thing happens when I try to remove it?


    Download update and scan with the free version of malwarebytes anti-malware

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • Does anyone know why these garbage Adobe CC is not open on weekends? We all sit and wait for these people to return to work to help us to fix their JUNK?

    Does anyone know why these garbage Adobe CC is not open on weekends? We all sit and wait for these people to return to work to help us to fix their JUNK?

    If you go to the forum to your specific program and ask a question, with all the relevant details, someone may be able to help

    Forum of to find a forum for your program list

    -or directly to the Forum Index

  • Does anyone know why the cat is offline?

    Does anyone know why the cat is offline?

    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  • Does anyone know why audio keyframes do not work in PE13?

    Does anyone know why audio keyframes do not work in PE13? I put in a track audio and changed levels, but audio playback remains constant. Oddly enough, even the level of volume (in settings-> Volume slider) moves from top down during playback of the clip. But the same audio output is completely unaffected. Weird.


    On what computer operating system is your first items 13 running? Have you updated to the 13 to 13.1 yet? If this isn't the case, please do.

    Assuming you are not a misinterpretation of the workflow for keyframing property of volume at the level of the timeline or tab/adjustments volume pallet/expanded, please remove the file Adobe Premiere elements Prefs (configuration file). For the elements first 13/13.1 on Windows 7, 8 or 8.1 64-bit

    Local disk C






    First Elements


    and in the folder 13.0 is the Adobe Premiere elements Prefs file that you delete. If it does not, then delete the 13.0 the folder in which the Adobe Premiere elements Prefs file exists. Don't forget to work with folder Option show hidden files, folders and disks enabled so that you can see the full quoted path.

    Please review and consider, and then we can decide on what was then based on details in your response.

    Thank you.


  • Does anyone know why Adobe removed the bulk of the video transitions?

    I use some of the transitions that Adobe removed in the CC version.  Anyone know why they found it necessary to remove them?

    Transitions miss you?

    We moved toward the parity between mac and win so some things have been brought, some have been moved and some have been deprecated. We have worked with a variety of users before you disparage anything and the consensus was that it was easy or not necessary workaround for a particular transition in each case.

  • Does anyone know why Itunes creates two categories of artist? (Photo inside)

    as you can see in the picture? his is not under the same artist, and I don't know why.

    Show your musical using the songs view library, so that you see a simple list with columns.  If you do not see the column Album artist , show it (right click on the header row in the list of songs to hide and show columns).  You can move the columns on the list by dragging the column (right or left) of its position.  I put the Album artist artist column column.  Make sure that the entries in the Album artist for all songs from this artist have the exact same entry.

    NOTE: You can do this at once by selecting all the songs of the artist and do a read the information on the selection.  Change Album artist in the Details tab for the Info field.

  • Hello. Does anyone know why a dot on my videos but not my photos? Thank you.


    I'm pretty new to DSLRs and I have a strange problem, I hope you pros can help with

    I recently had a canon t3i and use it mainly for video. A small dot (see below, in the yellow circle) has appeared in videos. It is always in the same place and it did not exist before. At first I thought there was something on the lens, but no, and the strange thing is, the point does not appear when I take still pictures, only videos.

    Nobody knows what this could be and how can I get rid of him?

    Very appreciated


    This likely dust on the sensor – don't be not alarmed, it is ordinary and easy to clean.

    There are actually two filters in front of the sensor - then 'dust on the sensor' is really the dust on the filter (nothing can really touch the sensor.)

    Most of the models of rebels have a self-cleaning - mode but it uses a piezoelectric effect vibrates the filter and I hope only to shake loose dust.  He used to always work.

    If this does not work, you have two options... it take a photo shop to clean (some stores may practice you a little money... even if I've heard of places that charge customers $50 - I think that's quite excessive.)  The other option is to clean it yourself.   If you do a lot of photographry, you can learn to do it yourself as well because it is something you will probably need to do from time to time.

    I have levels of aggressiveness that I use to clean a sensor... start by simply using the puffs of air (not very aggressive) and working my way up to the point where if nothing works otherwise, I could have possibly used the wet cleaning (but is almost never necessary.)

    Remove the lens, point the camera down so that the aperture of the lens is facing the ground (or resting on a table).  Turn on the camera, use the menus and select the self-cleaning option.

    See page 184 of your manual.  Basically you press menu, navigate to the #2 yellow key and navigate to "sensor cleaning".  Call the "Clean now" option (you may need to do more than once... but if it is not clear after 2-3 attempts, then the time to move to the next step.)

    By the way, to check if it is clear, put the lens on.  Set the camera to Av mode, compose a value large aperture (f-stop) - say f/16 or f/22.  Now, find a simple white wall (or ceiling) and take a picture.

    It is the sensor dust easy to spot VERY when you have a white non-contraste surface like a white wall or a ceiling AND use a high value of f-stop.

    It is clear, very well.  You are finished.

    If this isn't... next step is to get a hand blower - squeeze - like a Giottos "Rocket Blower.  I do NOT recommend you cans of compressed air.  These boxes will spray a residue (fuel) on the filter if you do not pay attention and then the filter should be cleaned at the wet.

    Access the menu cleaning sensor itself, but instead of "clean now", choose "Manually clean".  This causes the camera to raise the mirror and open the shutter to expose the sensor (really the filter).  Keep the camera pointed down and apply several puffs of air into the camera.  DO NOT let the tip of the fan touched anything inside the camera (otherwise you can mark or scratch the filter and make things worse.)

    If that is not ALWAYS clean, I use a magnifying glass to inspect the sensor to see what I'm working with.  You can buy these brands such as "Sensor scope" and they are inexpensive.

    My next step is to try a VERY soft brush to see if he brushing.  Use without pressure... just a few features very soft and very light should do.

    If none of this works, then it's time for the wet cleaning.

    Buy brand Eclipse cleaning solution (made by "Photographic Solutions, Inc." and transported in more real camera stores (not department stores that sell cameras).  You can also order online.

    You will also need the right size, cleaning swab.  This same company (Photographic Solutions) makes "Sensor swabs" but they come in sizes to fit your sensor.  For cameras with sensors APS - C size (which is what you have), you want a buffer of size of Type 2 sensor.

    OK... the purpose of this next step is do NOT damage your camera buy waste of money (not... "I'm not kidding actually.)

    You will place about 2 drops of Eclipse solution on the end of the cleaning swab.  You use the swab to sweep from one side to another sensor using almost no pressure.  Eclipse is almost pure methanol, evaporates quickly and leaves no residue.

    You will now be IMMEDIATELY discard this swab.  (this is what I mean about the bit 'wasting money').   There are 12 buffers in a box.  You can use a couple of them to clean the sensor.  They are cheap.  Your camera is not.  Do NOT try to save money on cheap disposable pads and risk damaging your camera - because if this swab picked up a little sand, would you scrape little sand on the sensor by reusing the it.  That's why I suggest using almost no pressure AND why I suggest to use the scope of the sensor to inspect the sensor and see what I'm working with.

    A sensor cleaning is not difficult, and if done right, it is not even dangerous.  But if you take anything to him as you have been cleaning a window, then you could make things worse (and potentially expensive to correct.)  Just go slowly.  Inspect everything.  I ran with the assumption that all which is on the sensor will scratch if I do not pay attention (even if most of the time this isn't true) and very light pressure allows to "tease" the offending bit of dust on the sensor.

    When you are finished, simply turn your unit on and put the lens on.  It automatically closes the shutter when you press the power switch.

  • Problem accessing my network on Vista drive when I try to back up the data on my PC... Does anyone know why it ask again me username and password?

    I recently bought an external hard drive Iomega Network home. I've successfully connected to my home network. When I tried to back up the data on my computer on the network drive using backup under system and Maintenance of the Panel, he continues to ask me as user name and password I have no installation. I tried to use my password of the router and several other passwords, but it does not help. I have tried to map the drive to a different drive name and then access, but still it ask again me username and the password. Bottomline, there are user name and password, but still it ask again me one. How to solve this problem?

    Hi fox55

    Thank you for using the Microsoft Answers Forums!

    Try this step and check if it helps to solve your problem:

    Password sharing is turned on.

    Password sharing is enabled by default for computers of working groups. When password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer. There are two ways to enable file or printer sharing:

    Turn off password protected sharing. To turn off password protected sharing, follow these steps:

    2. open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.

    3. under sharing and discovery, click the arrow next to password protected sharing.

    4. click on turn off password protected sharing, and then click on apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. Note: Password sharing is not available on computers that are on a domain.

    Also check this:

    Follow the steps to set password of the credentials under vacuum:

    Create a shortcut to (map) a network drive

    When you create a shortcut to a shared folder or computer on a network (also called mapping a network drive), you can get to it from the computer or the Windows Explorer without having to search or type its network address to each time.

    1. open the computer by clicking the Start button, click computer.

    2. click on map network drive.

    3. in the drive list, click a drive letter.

    4. you can choose any available letter.

    5. in the folder box, type the path of the folder or the computer, or click Browse to search for the folder or computer.

    6. to connect each time that you log on your computer, check Reconnect at logon .

    7. click on Finish.

    Your computer is now connected, or mapped, to the network drive.

    See this link for more information:

    Are there deposits in the router that blocks access? If there is, then try to turn it off and check if you can connect to an external hard drive. Go to this link:

    After back and let us know if it helped to solve your problem.

    Thank you and best regards,

    R uma - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for