Does anyone know why the text tool will not edit any text?
When I try to select the type of love, it shows a pencil with a circle with a line through it.
Cynthia,
It seems that he was stuck, and then you could take off he just moving it.
No doubt the first time this solution has been used.
Hi Ray. I see that we agree.
Tags: Illustrator
Similar Questions
-
Satellite M45 - does anyone know why the serial number is not recognized?
I have two satellites, an old A20 and a not so old M45. The A20 is saved, but Toshiba refuses to recognize the M45. The serial number is "35056305Q. Any suggestions gratefully accepted.
Maybe because it's a laptop WE ?
-
Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site.
I have the latest additon of firefox and only noticed this today... so not after I've updated, the name of the site appears if I move the mouse over the tab but it flashes and will not stay there, I can't seem to find a way to get the site back on the tab name... Help please!Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If this isn't the case, maybe an addon intrudes here or there is a problem with hardware acceleration...
-
Does anyone know if the 10 Windows will be more like 7 8.1?
Does anyone know if the windows 10 will be nearest 7 than 8.1? I hate 8.1!
Windows 10 is basically the same as 8.1 of Windows, but with a few small changes:
- The start menu should not be full screen size (you can choose the size)
- The 'active modernity apps "not touch need to be full screen size (you can choose the size)
- Other small changes like Cortana research, a new browser and reorganized Control Panel (settings).
Everything else is basically identical to Windows
-
Does anyone know why the cat is offline?
Does anyone know why the cat is offline?
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.
-
Does anyone know why my text is not resize by using the selection tool?
Hi all
I am following the tutorial How to make a Logo in Illustrator - KD #6 - YouTube which requires me to select text and stretch to fit, but my stretch mechinism seems to be broken!
Everything that I think should be done with the selection tool is extended to the box, I'm going to change the size of text manually with the ladder at the top, which is not great.
Can anyone suggest anything?
Thank you
Sally,
It seems as if you may have created the Type with the area Type tool or (or effectively by clicking on a rectangle or other traced with the text tool).
In my view, it should be normal (also called Point) Type.
-
Or can I can return to windows mail to collect emails?
Thank you
[Moved from comments]
It is likely that he was not prepared to leave a copy on the server, so by default it deleted messages on the server after you download the WLM. This is my point of view on what happened anyway.
Old Windows Mail messages should still be there. They were previously under c:\users\[username]\AppData\Local\Microsoft\Windows Mail under local folders (see www.oehelp.com/backup.aspx#wm). I think the upgrade leaves a Windows.old directory and you can try to look into it. What you want are eml files which are messages. Alternatively, you can use my free ceml (www.oehelp.com/ceml/) to view them.
But you will not be able to retrieve them from the server, if they have been deleted.
Steve
-
Does anyone know why 7 catalyst biz but not publish another hosted site?
Why the version 7 of the site does not work on my hosted site? It works on my site of catalyst. Same files downloaded.
http://www.ihawkeye.com/testsite/index.html
vs.
http://mikeparsonscreative.BusinessCatalyst.com
Attached is the display of the Console to the Chrome developer when you try to view your site www.ihawkeye.com/testsite/index.html. 403 indicates a violations of the access permissions. Files uploaded to your server have the incorrect permission settings and thus the browser cannot access the files that needed to display your site correctly.
-
The TurboTax program told me that I was not connected to the Internet, even though I was and now my Majic Jack, who has worked 10 months told me the same thing. I did nothing g to my computer except upgrades of Microsoft/Windows and I am at a loss as what to do. Can anyone help?
Hi CherieRadigan,
1. are you able to connect to the internet successfully?
2. facing a similar problem with other programs on the computer?
3. What is the full error message that you receive?
4. do you have security software installed on the computer?
If you encounter a problem with internet connectivity to TurboTax and MagicJack program, then check out the links below to the Publisher of the software and check if it helps.
MagicJack
TurboTax
-
Does anyone know why I would double in pictures pictures that vary considerably in size? Who is the likely cause?
If you see this by snooping directly in the photo library file, are not!
Photos is essentially a database program. The one and the only way to manage images in the library is via the interface of Photos, or you will corrupt the database.
In addition to store the original files (if you do not ckoose to keep a local library optimized), pictures also maintains smaller, miniature to speed up the loading of the different images.
-
Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?
I tried to provide screenshots - insert an image does not accept.
Just happened while the iMac was asleep.
Thanks in advance
Tony
The image seems to reflect the possibility of problems of graphics processor.
Some models had a history of failure or bad solder connections. others may
have a combination of capacitors & other materials; Finally we have to fix.
https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb
One of the remedies for a graphics card problem, is a re - weld made by the
users who have taken their card from the computer & their cooked in the kitchen oven.
This idea has worked for some; You may be able to contact an authorized Apple
Service provider or see if any of the parts suppliers in line can answer questions
availability of replacement given to nine graphics cards, if you were
can be removed from the logic board or if it is affixed, or welded to the card.
An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches
can show that if that article can be virtually eliminated, if if will show process.
https://www.iFixit.com/device/iMac_Intel_24%22
The details of the computer in the bottom of your post isn't an iMac G5 model, and
There is no powerPC G5 processor equipped Macs after late vintage
2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches
and would be a model of Intel. They use a different architecture than G5
powerPC even though in some respects are similar at least in the General design.
This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)
https://www.iFixit.com/device/iMac_G5
If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.
Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM
the Visual problem on the screen; an underlying hardware problem is a likely cause.
• Reset the management system (SCM) controller on your Mac - Apple Support
• How to reset the NVRAM on your Mac - Apple Support
If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:
Introduced April 2008
Abandoned March 2009
IMac8, 1 model identifier
Model number A1225
EMC 2211
MB325LL/A order number
First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)
You may be able to find the numbers of reference and research for replacement new or repaired
old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and
It failed due to a graphic processor; where she lived the BestBuy did not fix
She even if it has been purchased by them with their extended warranty; No applecare.
So, there are some out there in almost perfect condition, but not fixed, always.
Do not know if the charges involved would be the value relative to the other
later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}
Sorry I don't have any new ideas regarding this problem.
-
does anyone know why my Security Center can't turn on showe just me a message (windows Security Center cannot be started) what can I do for this?
If someone help me I thank a lot.
Hi belizariocruz cruz,.
· You receive an error with the message code?
· What is the operating system installed on the computer?
This problem may occur if the Security Center service is not configured to run under the Local Service account, but the dependent services are configured to run under the Local Service account.
Note: The following can be used for Windows Vista and Windows 7.
Method 1: To resolve this problem, make sure that the Security Center Service and all its dependencies are configured to run under the Local Service account. Set the center of security and its dependencies services to run under the Local Service account.
a. Click Start, type services.msc and press to enter.
b. double-click Security Center, click on tab log .
c. Select "this account" click on the Browse button, type Local Service and click ok.
d. type the password and confirm the password and click ok.
Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.
Microsoft Safety Scanner - free online tool for PC health and safety
-
original title: Defender
Does anyone know why when I run the defender and he finds a Trojan horse, and I try to remove it it starts to do then after some time the computer stops and when I restart it Defender always tells me there is a Trojan horse and the same thing happens when I try to remove it?
Hello
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?
You have to ask Apple why the design has changed. You should still be able to delete songs by changing your selection of synchronization and synchronize.
Or you can delete songs directly on your iPad and other iOS devices, directly in the music app or via settings > general > storage & use iCloud > storage management > music
-
Mail question: I want to remove my archived email (10, 000 ~) because I want to clean my iMac and make it more effective. Does anyone know if the removal of archive e-mail will leave my Inbox and saved intact E-mail or anything that doesn't fade too?
Who is your e-mail provider?
Maybe you are looking for
-
"No audio device is installed." Where's my audio?
I have a HP Pavilion a6152n Desktop PC, and I'm on Vista 32 bit. My audio was going well until I installed a GeForce GT545 graphics card. Now I have no sound. I don't know which driver to install, because according to Device Manager, no audio devi
-
When I start my computer, get three pop up windows
These three small error popups first thing after computer turning on - how can I get rid of them? Never use lead. C:\Windows\System32\hkcmd.exe C:\Windows\System32\igfxtray.exe C:\Windows\System32\igfxpers.exe
-
No sound at all on my HP computer
Hi all I have no sound on my HP computer, works with Vista... I tried a lot of things, but still there is no sound. Can anyone help? Thank you
-
I need to install the software on a second notebook
I have a creative cloud ID and I need to install the software on a second notebook, but the options that are available are: install the trial version or buy the products.But I don't want to buy, because it is possible to install on two computers with
-
How to activate the pressure sensitive Tablet?