When I start my computer, get three pop up windows

Similar Questions

• When I start my computer, get pop-up "unauthorized modification was performed on window, reinstall or restore the software.

  Original title:-prob

  I was working a project for three days without stopping during the day, and the fourth day, when I tried to start my laptop that came a massege saying that "unauthorized change took on the window, reinstall or restore software" what could happen?

  Hello

  (1) what is the complete error message you get?

  (2) you are able to start office successfully?

  (3) have you installed software?

  (4) you get an error code?

  Method 1:

  Check by using the last known good configuration.

  Follow the links and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

   

  Method 2: Boot in safe mode.

  Try to start in safe mod and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3: perform a clean boot

  Follow the steps in the link below to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  It will be useful.

• When browsing the internet I get the pop-up windows telling me that my computer is infected "bestantivirus2011."

  original title: bestantivirus2011

  Occasionally, when browsing the internet, I get a popup telling me that my computer is infected. Then it executes an ASNA and comes up with a long list of malware. When I click on remove all he wants me to install a file called "bestantivirus2011". research tells me that it is a scam. How can I remove it from my computer?

  Thank you, Jim B

  Hi, Rkill install and run. Do not restart or close Rkill.

  http://download.bleepingcomputer.com/grinler/rkill.com

  Install and scan with malwarebytes and remove any file that's find.

  http://www.Malwarebytes.org/MBAM.php

  Copy/old newspaper of malware in your next post.

• When I start my computer im presented with two windows xp options and im invited to click on one of them, I want to only being active and erase the other's

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  FWIW... It is always better if you include your question
  in the body of your message.

  Your Boot.ini file needs to be edited... you should know
  You can make your computer useless if you
  do not pay attention.

  Proceed at your own risk *.

  Perhaps the following goods range offers a few ideas:
  (Search Google will find much more information)

  How to remove both Windows XP Professional on the boot
  http://www.ehow.com/how_6945283_delete-Windows-XP-Professional-boot.html

  (289022) how to edit the Boot.ini file in
  Windows XP
  http://support.Microsoft.com/kb/289022

  How to use and edit the Boot.ini file in Windows XP
  http://vlaurie.com/Computers2/articles/bootini.htm

  Additional information and help with the boot.ini file.
  http://www.computerhope.com/issues/ch000492.htm

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to safely get rid of a Rundll.32.exe error that keeps popping up when I start my computer

  When I turn on my computer, this error message will come on the desktop.  Simply, it shows here and does not seem to influence what that either, but I know he does, because he has not always come, just started last year.

  Hi Beverly,.

  What message do you get? "RUNDLL32. "EXE - Entry Point not found" Error Message When you start your computer

• When I start my computer, I get an error message «Error loading C:\Users\jimhoss\AppData\Local\Temp\...» »

  When I start my computer, I get three error messages concerning three different files.  They all have the same path and they all say
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\bsipi.dll".
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\udilt.dll".
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\mounINFO.dll".

  I have Malwarebytes and run it a couple of times and I remove all the files it detects as malicious, but I still receive these error messages when I start my computer.  I also have MS Vista.

  Hello

  They seem to be the remnants entered boot for malware.

  Malwarebytes is normally very good to remove things like that.

  The problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• New hardware found pop up when I start the computer

  Every time when I start my computer, I have a pop up saying "New hardware found" I don't want to install it... How can I get rid of him... I have a Windows Vista Home Basic.  Please, any help will be grateful...

  Hello

  Follow these steps:

  Utility Spotlight Windows Install CleanUp Utility - this can help you to stop it.
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  --------------------------------------------------------------------
  Revo Uninstaller - free - you may need to reinstall then Revo can remove it.
  http://www.revouninstaller.com/

  --------------------------------------------------------------------
  I would also clean the possible general corruption.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Run the SFC and Chkdsk to ensure that corruption is disabled.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope they get you smoothly.

  Rob - bicycle - Mark Twain said it is good.

• -Pop-up message error when I start my computer: "TVAgent.exe - Entry Point not found".

  When I start my computer, the first message when I see my desktop is a pop up that says "TVAgent.exe - entry not found.» The procedure entry point not found PowerReadACValues in the dynamic library POWRPROF.dll. "I try to close it and it appears in the same as spot 10 times and then finally I can close it and it will not reappear. I tried a full sweep of the computer with Norton and it did not come with anything. All my programs and all seem to work fine right after, but I fear that there is something wrong. I am running Windows Vista.

  Hi Csiew42,

  Thank you for visiting Microsoft Answers.

  ·         Which version of Windows Vista is installed on your computer?
  ·         Remember to make changes to the computer recently?
  ·         Who is the manufacturer of your computer?

  I suggest to perform the clean boot and check if you get the error again. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot).

  (2) enable half the services.

  (3) determine if the problem comes back.

  (4) enable half of the startup items.

  (5) determine if the problem comes back.

  (6) repeat the steps above until you discover which program or service is causing the problem.

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.

  Kind regards
  Joel S

• I downloaded and installed EnhancedVideoInstaller.pkg.  Now when I start my computer an empty white box flashes before it shows the normal screen.  How can I get rid of this program?

  I installed EnhancedVideoInstaller.pkg in a vain attempt to have an online tour of health care.  It shows in my downloads and activity monitor, it shows EnhancedVideo, but I can't get rid of.  When I start my computer an empty white box flashes by in-between enter my password and the splash screen.  I would like to eliminate it.  Thank you!

  http://www.howtogeek.com/231496/how-to-uninstall-applications-on-a-Mac-eVeRyThiN g-you-need to know.

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• When I start my computer I get an error message about V protect Application on the Windows XP-based computer

  When I start my computer, I get an error message, "V Protect Application has encountered a problem and needs to close".

  System information Utility version 1.0.0.1

  OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit

  Processor: Intel (r) Celeron (r) CPU clocked at 2.66 GHz, x 86 Family 15 Model 4 Stepping 1

  Number of processors: 1

  RAM: 1 GB

  Graphics card: RADEON 9250, 128 MB

  Hard disks: C: Total - 76316 MB, free - 47785 MB; KC: total - Mo 305168, Free - Mo 304760;

  Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, P4M266-8233,

  Antivirus: AVG Free Antivirus, update: Yes, On-Demand Scanner: enabled

  I run the above system and would appreciate any help with the removal of this message as if I don't send it to Microsoft, it goes.

  Thank you

  Roy.

  You can try those Microsoft committed the 'experts' ideas Support Engineer (1, 2, 3) for safe, clean boot Mode, Online Scanner, but I think that most of the people who know how XP would recognize that there is no component 'V protect' in Windows XP and a simple search Google reveals that your problem is with your AVG software and has nothing to do with Windows XP.

  You should look in their forums (like me) and here's what they suggest:

  Vprotect belongs to AVG Security Toolbar.
  Please try to run repair installation using the latest installation package.

  If the problem persists, please follow all the steps in the instructions to complete reinstallation .

  I think that if I were you, I would follow the instructions on the page AVG to uninstall and reinstall your AVG because there may be other parts of AVG who are afflicted that you have not yet discovered, but in AVG, some people with V forums protect problems find that AVG repair install works.

• The desktop icons and taskbar are at least three minutes to load when I start the computer.

  Original title: problem with the desktop icons

  All of a sudden when I start my computer, the icons on the desktop and icons at the bottom of the clock of the take at least three minutes to load, and before that time, they used to load in a few seconds.  Also, I have no problem with the computer start.  Any help to solve this problem will be greatly appreciated.

  According to the specifications of your system, hard drives on your system are disks IDE (not the SATA drives).

  Sometimes the Interface IDE mode can change from DMA mode to PIO mode and when that happens, things sudden. run very slowly, but it is easy to check and adjust if you need to.

  Here's how:

  If you are using IDE drives, use Device Manager to check the channel Transfer Mode IDE is set to something like DMA if available (depends on your hardware) and the slow PIO mode.
    
  Don't forget: PIO is the slowest, DMA is faster.

  It is easy to check and usually easy to fix and the mode would not have changed in itself, so if she changed to PIO, change it to DMA, and then understand why it changed and fix it.

  To launch the Device Manager console, click Start, run and enter in the box:

  %SystemRoot%\System32\devmgmt.msc

  Click OK.

  Expand the section controller IDE / ATA to see your IDE channels. Each right click and choose Properties for each channel that has a tab advanced settings, determine the Transfer Mode. There are usually 4 channels to check in a desktop computer, maybe less for laptops.

  Faster selection will always be a kind of selection DMA (usually: DMA DMA5, UDMA, etc.).  If it is PIO, change it to DMA.
    
  If you are unsure of what you see after return of help and advice.
    
  If you make settings, restart and check the settings again to make sure that any change stick.
    
  What may have caused the change?
    
  http://support.Microsoft.com/kb/817472

• Get a box to enter the password when you start the computer

  * Original title: turn my computer

  When I start my computer, I get abox asking you the windows xp startup password.  This has never happened before and I don't know the password.

  Hello

  -Have there been recent changes made on the computer before the show?

  I suggest you to check if you can connect to your account or the account of default administrator in safe mode.

  Check out the link for more information on how to enter Safe Mode.

  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  a. the built-in Administrator account is disabled by default.

  b. you will see an icon for the administrator on the homescreen mode without failure.

  c. connect you (the password will be a white)

  If you are able to start the computer in safe mode, try to check and restore the system.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Please get back to us with the information above to help you accordingly.

• When I start my computer, I get and Error Message (InfoCenter.exe - Application error)

  When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same error occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Check if that helps.

• When I start my computer I get a message that says that the file < root windows > \system32\hal.dll. is damaged or missing.

  file HAL.dll

  When I start my computer I get a message that says that the file \system32\hal.dll. is damaged or missing. Please reinstall a copy of the file. I have the original Windows XP CD and I tried to re - install, but it will not go beyond the implementation of window. I can't sign in to windows. How can I reintall this file?

  It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose?  It depends on your hardware, but it is extremely likely that the problem (did I already say that?).  I've never had to replace a file hal.dll for this problem.

  The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted.

  For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top.

  If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too.

  You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go.

  For example, method 1 will not work if your system does not start.  You may have more luck with other "methods".

  If that doesn't work, then I suggest to provide a little more information about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?