Does not recognize DVD in Movie maker

Similar Questions

• My DVD drive does not recognize DVD game discs.

  My NEC ND-4550-reader DVD - RW does not recognize DVD game discs.
  He has no problem reading movie DVDs and music CDs or access data CD and DVD burnt with data on them.
  I removed and let XP Reinstall the device and high-low filters removed the registry etc nothing works.
  I made a copy of a DVD game on another PC and it is recognized and install my PC.
  All DVD discs work very well on the other PC.
  I am running Windows XP Professional with SP2.
  MS Fixit controls indicate no problems.
  This would be a matter of software protection?
  All tried game DVDs are official records and not copies.
  The NEC ND-4550 uses cdrom.sys as pilot.

  Finally, I replaced the drive for a new one (Pioneer DVR-S18L) and everything now works as it should.
  So I suspect that it's a hardware problem and not one that can be resolved by any of the Windows settings.

• Satellite M60-155: drive does not recognize DVD

  The multidrive on my laptop does not recognize DVD-he just turns and clicks.

  It recognizes the CD tho. I've had this problem before, but did not pick up the CD player and it plays DVDs.
  I managed to solve this last time, but I do not remember how.

  Any ideas?

  Hello

  Don't you remember how you solved the problem? ?:|
  Hmm, very strange.
  However, I think that it s a problem of calibration of lens of the drive.
  The lens can not be calibrated properly and that's why the drive cannot read the media.

  Have you tried to remove the drive from the laptop? If this is not the case, try to remove it. Then start without the drive. Then shut off the unit. Reinstall the drive and start the laptop. The firmware should take over again and maybe the lens is calibrated in the right position.

  You can also try to clean the lens gently. But if the whole points will not help you may need to replace the drive

• Studio 1537 Roxio does not recognize DVD burner

  I have a Studio 2008 1537 with an 8 x Slot Load CD/DVD burner (dual layer DVD + /-in car and it was replaced under warranty about 2 years ago, but now Roxio does not recognize as a reader.)  I want to make copies of some videos, but I can't do it.  I think I need to update the driver, but I do not know what actual brand or DVD burner model number I.  How will I know?

  Roxio will be available for download on my Dell downloads. So go ahead and register, then download the installer and save it.

  You might want to try the upper and lower filter thing (link below). This can solve the problem of Roxio, but not iTunes issue.

• Laptop Inspiron E1405 media Cntr, CD/DVD-ROM does not recognize DVD

  My CD/DVD-ROM does not recognize when there is a DVD in the drive. I had this problem before, but persistence always overcame the problem, that is, I still put the DVD in over and over again, and then it worked. A week ago, I was able to watch all of a DVD movie, reinserting after about 10 times. But now, it does not recognize a DVD. I tried to roll back the Media Player from v.11 to v.9, but it made no difference. I would appreciate help, like Dell and the India seems unable to help.

  
  

• SD R6372 DVD burner does not recognize DVD + R

  Hey people I have a problem with my DVD writer. I bought another laptop producer but there a Toshiba ODD-DVD SD - R6372 an it worked for almost a year. now I know not what has happened, but does not recognize the drive of DVD + r. I tried DVD of 3 different manufactorers, but none worked. can you help me please?

  Thank you

  ANTY

  Hello

  Well, I don't know what can be the problem, but you can try to remove the Mr Device Manager DVD player the dvd player will be recognized again after restarting the device. However, you can check if the laser lens is dirty. If so, I propose to clean.

  Good bye

• Satellite C650-1CP - does not recognize DVD

  For some unknown reason, my Satellite C650-1CP stopped reading DVDs (although it works for cd), it does not recognize all simply that a DVD is in the drive.

  I tried several games (including games that worked on my laptop) and none do not work, any suggestions?

  Hello uncleben,.

  Maybe the DVDs are scratched... Have you tried different types of DVD and you are sure that the drives are ok?

  You can also try to remove the server - and lowerfilters in the registry. So follow the instructions in this Microsoft article:
  http://support.Microsoft.com/kb/314060

• Satellite A200 27z does not recognize DVD drive

  Hello

  Ive got the computer laptop toshiba Satellite A200 27z & a while a go it wouldn't turn on at all, I took it to a computer repair shop & they seemed to solve the problem, except that they delete all the "stuff" that comes with the laptop.

  On the most part, he always does things I want to do. But recently I went to play a dvd in there & it won't work, even if it does not play DVD if theyre sent to me by msn etc.

  Normally, when I put a dvd, toshiba dvd player would automatically right away, but now he used. When I go to manually open the dvd player toshiba a message just ups saying:

  * the specific drive is not found. Check the settings by going to settings > stock settings > source. or otherwise check that the disc has been correctly connected to the levels

  Ive been in the "action settings", but the source area is blocked (do not type anything in it). I don't know much about computers and so do not know how to check if the drive is properly connected.

  It will not also recognize when I put a cd that he either, as normally if I put a cd in and then itunes would automatically load upward, now itunes will not appear if a cd is in the laptop & I can't find it anywhere.

  can help someone, I have no idea about these things!

  I had this problem a few months ago, I thought that I should send it to be repaired but Windows Mr Fixit made and my dvd player is running again
  Here is the link
  http://support.Microsoft.com/GP/cp_fixit_main

  I hope this works for you

• Mp3 song does not work in Windows Movie Maker

  I'm doing a video with Windows Movie Maker.  I downloaded a song on Amazon MP3 and used the button import into WMM and received the following message.  Please notify.

  My documents\Ma Music\Amazon MP3\Romantic Dinner Party music Piano\Candlelight_ with relaxing, Instrumental romantic music of the party dinner with Relaxing Instrumental Piano\12 - Fallingwater.mp3 could not be imported. The selected file is not valid or is corrupted.

  They work, convert a wav file and in the future, choose this option for your download if possible.

  http://www.myvideoproblems.com/tutorials/Convert_mp3_To_WAV.html

• My DVD ROM does not recognize DVD discs after upgrading Windows XP to Windows 7.

  A few days ago, I updated my laptop to Windows XP to Windows 7. Everything seemed to go well until I tried to burn a DVD disc. The program I use for this purpose is Nero 9.4.26.0. So, I've discovered I don't have problems with writing and playing the usual CD but my laptop does not recognize and does not read or write DVD. Laptop HP Compaq 6510 b and the DVD ROM is MATSHITA DVD - RAM UJ - 860H ATA DEVICE. Please share your ideas about the problem. I really enjoyed this :)

  Some CD / DVD readers may require an update to function well in Windows 7.

• Satellite L550D does not recognize DVD

  Hi people,

  New on here have just got my laptop last week.
  It is a standard configuration with Windows 7 64 bit and the DVD - RW is a Pioneer model.

  I used CD no problem to install programs, etc, but yesterday put a DVD movie into the machine for the first time only for it to purr and turn the disc for a few moments and then do nothing.

  I tried the DVD of all regions and tried to find any updated drivers without success.
  Standard dvd only software on it and I haven't installed burn programs etc. it can have an impact.

  The only strange thing is that the driver is from 2006 and seems to speak of CDs.
  Before contacting toshiba, does anyone have any suggestions?

  Thanks for any help.

  T

  Hello

  You happen it ONLY helps some DVD or do you have problems with the other DVD too?

  In many cases, it is possible of s that the CD/DVD drive does not have the means of inserted at the compatibility issue. In such cases, it s a good idea to update the firmware of the drive of s (if the firmware is available for the CD/DVD drive).

  You must also change the registry; Start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  In addition, go to the Device Manager and remove the drive from the list of devices CD/DVD.
  Then restart the unit, the Windows operating system should recognize the gain in car.

• DVD Rom does not recognize DVD

  CD/DVD-Rom is not recognize my DVD

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD - ROM SD-M1612 does not recognize DVD

  I tried to search, but this search system is not very intuitive. In any case, I found the heading "DVD - ROM SD-M1612 doesn't recognize DVD".
  I'm having the same problem.

  I know the drive works, I use for 5 years or so now, however long he is out. I replaced my hard drive, reinstalled my OS and now it doesn't recognize DVD. !!????

  I tried all day to look for a solution. Fireware v1004. It reads CD fine, but not very strange DVD.

  It also delays my startup process if a DVD is in the drive, by a very long time.

  Any thoughts on what I have to update?

  My motherboard is an ASUS P4TE

  Hello Fred

  Why are you so sure that the drive is not faulty? If the player is old, it is possible that there is problem with the calibration of laser for DVD playback. I presume you n t have problem with CD with original DVD movies. Am I wrong?

• does not open my windows Movie Maker project!

  I worked on a project I did with a friend for hours, and I recorded and he was preparing to publish on youtube, but before I did, I tried to open my project again, and when I clicked on open, it charge at halfway, and then he said the Director of windows has stopped working I tried to open it several times and it does not work, so I made the same video again once and tried to open it, the first time that it worked, but when I opened it again, it does the same thing, so I thought it was the length, so I made the video in 2 parts, and it still does not work! can you help me please? It is very important for me and my friend!

  Windows system: vista
  Windows movie maker system: 2007-2008... I'm not sure which

  Sounds like your project .mswmm files is corrupt.
  Maybe you're trying to make the project too complex
  with too many changes, transitions and effects.

  Next time you have a project open... try to publish in
  the DV - AVI format.

  The following articles provide information about the (economy) edition
  in a film format that will play in Windows Media Player
  and can be shared.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html it is possible that your project will be inaugurated in
  Movie Maker 2.6, but it is doubtful for Live Movie Maker.
  It would be well worth a try.

  Good luck...

• My DVD drive does not recognize DVD-R/DVD-RW Virgin

  Hello! My computer model laptop lenovo's G460

  and here's my name of dvd drive: HL-DT-ST DVDRAM GT30N. I use Windows 7 Home Premium x 64 bit.

  ROM cannot read any DVD-r Virgin it can actually work; CDs and DVDs (movies, music, etc.), detect and writes CD Virgin-Rs., but not a DVD-r virgins. It cannot detect even when I inserted the CD in the Republic of Montenegro.

  Any ideas what to do? Or what is the problem?

  a last step if this does not work, try to run windows own installation because some applications may affect your device.

  Otherwise, contact lenovo support

  Edit: this marker is as resolved.