Similar Questions

• Laptop Inspiron E1405 media Cntr, CD/DVD-ROM does not recognize DVD

  My CD/DVD-ROM does not recognize when there is a DVD in the drive. I had this problem before, but persistence always overcame the problem, that is, I still put the DVD in over and over again, and then it worked. A week ago, I was able to watch all of a DVD movie, reinserting after about 10 times. But now, it does not recognize a DVD. I tried to roll back the Media Player from v.11 to v.9, but it made no difference. I would appreciate help, like Dell and the India seems unable to help.

  
  

• Computer does not recognize the disc in the cd drive.

  original title: media player 11 does not recognize the disc in the cd drive.

  Media Player 11

  I use Windows XP oper. system, my windows player works fine execpt when I place a cd in the drawer of rip to rip to my library WMP does not recognize that there is a disc in the drawer of thr. The problem started after I installed a vinal record of pc system, but he has always recognized that the disc was in rip drawer, if I put the disc in the drawer and WMP has closed and reopened. then it started to not recognize that a disk was in the drawer, even if I closed and reopened WMP with the disc in the drawer. Any solution to this problem would be greatly appericated. Thanks George

  Hello

  Remove the filter upper and lower filter and see if it helps.

  r: clickStartand then click run

  b:   In theOpen box, type regedit, and then click OK

  c:   In the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  d: in the right pane, clickUpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. ClickUpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step g.

  e: in theEdit menu, click delete.

  f: when you are prompted to confirm the removal, clickYes

  g:    In the right pane, clickLowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section"next steps"to learn how you can find more solutions or more help on the Microsoft Web site.

  h: in theEdit menu, click delete.

  i: when you are prompted to confirm the removal, clickYes

  j:    Exit Registry Editor.

  KC: restart the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope this information helps.

• iTunes does not recognize my devices after the last update

  iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.

  Help, please

  Thank you

  Cyana

  Found this solution here:

  Re: Does not recognize devices in iTunes on PC

  works very well

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  Yes.  and?

• My laptop does not recognize the disc that I put in the cd/dvd rom

  My laptop does not recognize the disks I put in the disc/dvd rom disc... What wrong with it? How to operate? I'm running on windows xp. My laptop is a Dell Inspiron 6000

  Original title: my laptop does not recognize the disks I put in the disc/dvd rom disc... What wrong with it? How to operate? I'm running on windows xp.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  Perform the steps described in the article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows

  Hope this information helps. Please reply back with the State so that we can help you.

• DVD Rom does not recognize DVD

  CD/DVD-Rom is not recognize my DVD

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD does not recognize the drive after installing updates from micorsoft

  After microsoft updates have been installed on our system the DVD - RW drive does not recognize DVD or CD the drive tries to read the disc and then the door opens and DVD/CD is ejected and then it asks to insert the disc.

  Hello

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  Follow the steps in the link.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/314060

• Computer does not recognize the discs when inserted in my D: and E: drives.

  Original title: DISK DRIVES D AND E . Do NOT WORK

  When I insert a blank disc in my drives .He is not found by my computer.could would it be a disc that I need to update? or is their another way I can get it going again until a few weeks ago running good, I ultimate.32 bit .is their a scan from windows vista I can do to find what reader needs to update it please help.

  Hello

  It is not unusual for the same problem have an impact on both drives, in fact, is planned.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• IPod Classic does not recognize Itunes library after updating 12.4.1.6

  After (sigh, unconsciously and unintentionally) update my Itunes 12.4.1.6 Macbook Pro, my Ipod Classic is as it does not recognize the Itunes Macbook is the parent library. I made a few additions to the Macbook Itunes playlists, but my Ipod sync... at least do not unintentionally erase all currents (gulp, 157 GB of data) and re-import the entire library again. Is there a way to get around this? I did have this problem - at least I don't remember having it-advance updates to Itunes, where the Ipod no longer recognizes the Itunes Macbook as his home library. I ran a "check disk" on the Macbook and Ipod, and they are both clean, no sign of corruption. FWIW, I use the laptop on Mavericks, OSX 10.9.5.

  Did you have to add your media to the library after the update? See the empty/corrupted after upgrade/crash iTunes library.

  TT2

• iTunes does not recognize any of my iPhones (Windows 10)

  I've recently updated iTunes 12.4 and now my iPhone 5s, and my iPhone 4 are not recognized by iTunes. They appear as 'Apple iPhone' in my file Explorer, but are not accessible via iTunes or iFunBox. I tried all the options in the management of the link here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  I removed the lockdown folder.

  I tried several cables.

  When I go into Device Manager, there is no "Apple Mobile Device USB Driver" under "In Bus USB controllers", but there is 'Apple iPhone' under 'portable '. If you're looking for an update to this pilot says 'Windows has determined the driver software for your device is up-to-date' "MTP USB device".

  More interesting still, I went down to iTunes 12.1.3, thinking that would take me back to a working version, but in fact it STILL does not recognize my phone(s)!

  What the hell is happening?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• OfficeJet 6600 does not recognize my new HP Pavilion windows 8.1 for scanning

  I have a HP Officejet 6600 networking with my new HP Pavilion windows 8.1 it prints fine but does not recognize my computer when I want to scan. Whenever I want to scan a document to my computer I have to run Scan doctor. I called tech support and they can't help me because my printer is no longer under warranty as I bought it December 2012. but my office was purchased November 2013. They said that it is clearly a problem with the printer and not on the computer. They won't even talk to me or answer my questions without fees being paid first.  The scanner recognizes my laptop and desktop to the husband who have vista and 7, respectively. But I don't understand why it will print without difficulty and habit of scanning.

  Hi leila1964,

  Welcome to the Forums of HP's Support.

  I want to offer a helping hand with the 8.1 of Windows not scanning with your HP Officejet 6600. When you run the HP print and Dr. Scan on the computer it says it fixes some thing or that it cannot fix what whether?

  Given that the printer works on the other two computers (Vista and 7), the problem is with the WIndows 8.1. I want to uninstall the printer software and the HP printer install wizard makes sure that we get the newest software possible.

  Let me know how it works.

  Thank you

• Windows 8 does not recognize Officejet 5780 after update

  I bought a new Toshiba L850 - RJ 1 computer. After installation, I was able to print a few pages. Windows 8 began its update, and then after that it does not recognize my HP Officejet 5780 printer. Any suggestions? Type of in urgent need to print my bills... Thank you.

  Hi ebrulikedi,

  a new driver of windows 8 is out for your printer on the 28th of August 14. Please order the link below link is for an officejet J5780 that I assumed, it comes to your printer, but please check your printer is the printer shown on the Web page.

  you will also find the software of hp update utility (which automatically keeps you updated printer driver software), but also a hp to address also diagnostic tools

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=3301296#N897

  Please let me know if you need more information.

  Kind regards

  Na-Vi