does not start, info system not found

Similar Questions

• Windows Media Player 11, XP Home Edition, does not found album, nor recognize the albums ripped in file Rip information.

  Find cd info in Meta services, but will not download in this player. (Firewall off the coast, all of the menus tools checked properly)

  Also, after cd edition and extraction in the Rip folder manually set up in the Tools Menu, the CD files are found, but not added to the library.  (Saved in files as the AMM.)

  Have used Windows Media Player 10 for 12 years and built an extensive personal collection, but after the virus, I'm stuck with Version 11 will not return to 10.  New Microsoft 10 downloads are not compatible for course security pkg 3.

  Spent two days going through all the Microsoft statement pages (most seem to be put in place for Vista or 7) with no luck.  Any help would be greatly appreciated.

  Hello

  Run the Fixit and see if it helps.

  Difficulty video Windows Media Player and other media or from library (Fixit)

  Hope this information helps.

• Debugger does not found/not work not after reinstallation

  Hello

  I have a problem here. I received an update of flash player some time ago, and my flash drive has been updated to version 10 for awhile. I went back to work on Flex and turns out that my debugger no longer works. I tried reinstalling several times, that tells me that they are all successful every time, but every time the "debugger" has to "never returned" correctly.

  This is the error:

  C:\WINDOWS\system32\Macromed\Flash\Flash10d.ocx

  Flex Builder cannot locate the required Flash player debug version. You should perhaps install the debug version of Flash Player 9 or reinstall Flex Builder.

  You want to try to debug using the current version?

  I don't have a Flash Player 10 now, I only have what is installed from Flex. So I no longer get message of additional Plugins required when I see a swf file.

  How can I get my debugger back in condition?

  Thanks for your help.

  Alice

  Hello

  Try to download the Flash Player 10 and Flash Player 10 of debugger in this URL: http://www.adobe.com/support/flashplayer/downloads.html#fp10

  Concerning

• ;" The application has faild to start because MFC71D. DLL was not found.re - installing the application may fix the problem. »

  I'm trying to use my music software I installed recently in my computer I have get__the next message; "The application has faild to start because MFC71D. Mean what DLL__was does__that does not found.re - installing the application may fix the problem. »

  I tried to re - install several times, and I got the same results

  Hello

  This means that you can try to uninstall the software and then re-install.

  Click Start and Control Panel. Under programs, click on uninstall a program. Find your program in the list, right-click, and choose uninstall.

  When he finished, restart the computer. This will ensure that the system can get a grip on all the files will be released.

  Then download the program again and save the file to your desktop. When he finishes, right-click on the file and select "Run as Administrator".

  Let us know if this helps

  Mark <> Microsoft Partner

• computer does not start message "autochk.exe not found" followed of "stop: c000021a (fatal system error.

  computer does not start.

  the screen message is: "autochk.exe not found."

  second message is: "stop: c000021a (fatal system error)".

  «the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»

  "the system is stopped.

  Hi Bobzurcher,

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

   

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Let us know if that helps.

• After my computer will crash does not start has a black screen with message operating system not found. Responsible for recovery disc but wont start.

  not boot Vista after that computer crashed have a black screen with message operating system not found.recovery discs won't load

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Above is the way you normally boot from the Vista recovery disks.

  If you have tried to boot from the recovery without success disks, contact the manufacturer of your computer.

  This isn't their recovery process, Microsoft.

  See you soon,.

  Mick Murphy - Microsoft partner

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

• Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

  Hi all

  my situation is like this:

  When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

  My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

  The partition table doesn't have a valid System Partition.

  Repair action: Partition table repair

  Result: Completed successfully. Error code = 0 x 0

  That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

  CMD:

  DiskPart

  list disk

  Select disk 0

  partition from the list

  selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

  created new partitions same dimensions (all the primary dimensions)

  then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

  So after this long description, my question is:

  Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

  P.S. I do not installed Windows 7, I just deleted partition table and created a new.

  Sorry for my English, I'm not a native speaker. Thank you in advance.

  Hi MatBar,

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

  You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

  I hope this helps.

  Thank you.

• Helpctr.exe does not load in the Start Menu. System Restore does not work.

  Help and Support not be loading not on the Start Menu. I get a msg of error helpctr.exe is not found. I run for the file with no result. Also the system restore does not work even in safe mode. I use XP Home SP3. Any suggestions? Thank you.

  No problemo!

• Windows XP mediacenter edition starts with the message "Not found operating system"

  pls help..., my Acer laptop aspire 5594wxmi, windows xp Media Center Edition version 2002, service pack 3. can't run recovery... I've seen all folder and file missing in MY DOCUMENTS..., I try to make formatting back up the entire system... "Damage' does not work?, the problem is OPERATING SYSTEM NOT FOUND, even I try" backup cd "dics still return a same problem... oh my God, I m not fight... to my friend, here just ask for HELP..." Thank you.

  Hi garyquek,

  ·         Remember to make changes?

  ·         What happens when you try to use the recovery?

  You can check if this article helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

• Operating system does not start; F11 gives error.

  HP Pavilion dv7

  0xc000000f error code

  -does not start the o/s

  -not boot to safe mode (or whatever it is)

  -System gives error F11 recovery

  -friend did not restore system cd

  -OS is Windows 7

  I removed the hard drive and slave it to my office (using 2.5 USB cable).  The files are accessible except the \USERS directory is MIA.  If I can see the C: and D: (recovery partition)-

  Can I run the program on my desktop computer to create the recovery CD?  (faster you proceed your order/delivery/arrival)

  Other suggestions?

  Thank you...

  ACETech says:

  p/n: NM295UA #ABA

  Installation media (recovery dvd) was not made by the user.  That's why I asked if I could make running the hard drive from outside the laptop (enslaved at my office).  Thanks for the info, I can't do that.

  Will be there without you say the o/s?  It is not sure that vista or 7 32-bit or 64-bit.

  Looking at his hard drive Windows and a Linux flash player, I don't see his user under the \users Directory directory.  It of funny, just might be blown away...

  It's Windows Vista Home Premium 64-bit with Service Pack 1.

  Here link to the specs page.

  Best regards

  ERICO

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Windows System 32 does not locate khatra.exe is move every time when I start my laptop that I have to remove khatra.exe from my laptop

  Windows System 32 does not locate khatra.exe is move every time when I start my laptop that I have to remove khatra.exe from my laptop

  Hello

  Information KHATRA.exe
  http://www.bleepingcomputer.com/startups/not_used-24897.html
  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• computer starts but nothing works. OneCare has been stopped, restart, no network connection found, office does not work. Analysis now with the malicious software removal tool, but nothing happens.

  OneCare was 'arrested' will not restart
  Wireless networks - does not and cannot correct
  No program will run if I'm in safe mode
  I did a virus scan with the malicious software removal tool, nothing was found.
  I write this on my netbook - I can't have my laptop online.
  I have no idea what to try next.  I need my laptop!  Help, please

  Hello laughingpaws,

  To help resolve this issue, use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)