Windows XP mediacenter edition starts with the message "Not found operating system"

Similar Questions

• Problem re-installing VISTA after the removal of Windows 8 Preview Release, all I get is a black screen with a message "Not found operating system"

  I recently tried Win 8 on my VAIO laptop spare parts on which I ran Vista, after having previously deleted all the files and documents (I don't use often the laptop). Having concluded that Win8 will really work correctly with a touch screen (and the display size was bad as well), I uninstalled WIN 8, understand that I have to re - install Vista from my rescue disks. This I tried successfully a few months previously to make a clean reinstall. However, after removing 8 WIN via the Control Panel, I can't re - install Vista now. All I get is a black screen with a message "The operating system not found" and the rescue disks do not register. What can I do? I like Vista (although I now run Win 7 on my PC) and really want to put it back. Grateful for the advice.

  Well I finally fixed it by tweaking the BOOT BIOS settings and find something along the lines of VAIO Setup. I'm afraid, I just don't remember exactly what I did, but suddenly I found and ran 'VAIO Hardware Diagnostics' gave me a heart when it announced "no error was detected on the Vaio. Then I saw there was an entry for 'VAIO Recovery Utility - Recovery Wizard' and everything started to load. Since the 2 recovery discs I had. Finally, I ran MS Office and Small Business CD-ROM and now everything is back the way that it used to be. Here I had taken more note of how I got to the well Recovery Wizard. I hope that I never have to do it again!

• I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

  I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

  Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

  Hello

  Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make sure you back up your data before you perform a repair of Windows installation.

  Hope this information helps. Back to us for assistance.

• With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. .

  With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. SO I've reworded in safe mode with network and IE has worked very well. I installed Mozilla Firefox and then restarted in normal mode. Then Internet explorer would not connect. How to diagnose in safe mode. What does safe mode or safe mode with network do to help diagnose? Can someone help me solve this problem? Any help would be appreciated thanks in advance.

  Hi, Raymond J,.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What type of internet connection do you use?

  ·         What security software do you use?

  Follow these methods.

  Method 1: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  How to reset the Protocol Internet (TCP/IP)

• When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "

  original title: xvidcore.dll not found.

  Nice day

  When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "  The screen becomes blue white.  I am operating Windows XP SP3.  Any advice much appreciated

  Thank you, Brian Newman

  No guarantee, but it might be interesting to try to download
  and install the XviD Codec:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/
  (name of the file to download: Xvid - 1.3.2 - 20110601.exe)

  Good luck...

• Why do I get the message that my operating system is not supported?

  My computer is running Windows 7-64 bit. I have the latest softwear on my iPhone and my iPad. I installed edge inspect on these devices and have the advantage of Google Chrome to inspect the installed extension. I have enter my password strengthened for both devices in the Chrome extension. Why do I get the message that my operating system is not yet supported?

  It's VERY interesting... even if I got this weird message, once I connected my iPhone and my iPad to the extension of Google, it worked! See all what I automatically in Google Chrome displays in the application of edge inspect on small devices. It's clean! The only problem I see is that Adobe needs to replace the error message with information about the use of the application.

• Satellite L300 starts with the message "JCQFX is compressed.

  I have a toshiba satellite l300 and worked very well until it turns off, when I turned on the computer laptop back it came with the message
  JCQFX is compressed
  Press the keys ctrl, alt and del to restart
  I did it but it keeps going back to the same thing, please can someone help me I am at my wits end and trying to monopolize my laptop girls thank you in advance x

  Hi the Welsh,

  Never heard about this error message then I asked Google on this subject and that therefore say: also no information :(
  Very strange

  So, step by step:
  Do you see the same behavior when you start Notepad (Windows) in safe mode?

• Satellite L30 - 10Y always starts with the message of repair

  Hello

  Whenever I try to run my Satellite L30 - 10Y (PSL33E) I get the window with the message Startup Repair (Windows cannot repair this computer automatically).

  I went through the list full repair and still have the same message.

  Can someone please?

  Hello

  Maybe the operating system is confusing upward
  Have you tried to restore using the Toshiba Recovery disk?
  Check if it works!

• After I installed Windows 7 on HP laptop, get the message "not plugged in charge."

  Same laptop, charger even worked well in Visa. After a clean install of Windows 7, I get the message "not plugged in charge."

  On my system:
  HP / Compaq Mobile Workstation 8510w
  The charger is intended to be used for an additional cost / secondary battery - which worked fine under Vista when connected to the laptop. Still, ordinary charger works fine in Windows 7.

  So my question: must be unwanted software in Windows 7. Somehow, she acknowledges that it is not the normal charger and refuses to use it - but since it worked fine under Vista I would like to continue using it.
  How can I do this in Windows 7?

  Concerning
  Wolfgang

  I had the same problem with my Compaq after upgrade of a cell of 12 after battery box white market. What I did first, was I uninstalled and reinstalled ' Microsoft ACPI - control method battery compatible "and who did not work, so I followed the following steps:

  1. a laptop battery and remove (while on).

  2. open the lid and remove the AC adapter / CC (for again, turn off the system)

  3. close the lid and plug in the battery

  4. open the cover, plug the AC adapter and turn on.

  After I did the above, my system began to charge the battery. Some people say that after step 2, shut down the system before you unplug it from the AC. I don't have because most of the solutions I found does NOT shut down the system first. If you've been careful with your system, this time above should not do harm to your laptop

  Matt102

• Windows Vista Ultimate Edition started cutting the computer when certain usb devices are connected

  I had this platform for a few years with no problems. Last week when I went to sync an ipod (which I had already done several times) it abruptly shuts. I can it restarts, but when I try to sync the ipod, same thing happens, no error message full closed.  Also, I noticed that when I am attaching other devices such as an external hard drive or a blackberry it stops.  Today, he does even without fixing anything. All of these devices were working very well.  I have disassembled the computer, cleaned all fans, removed all dust bunnies. I have an ASUS MB, cpu temperature seems good. I think it's a software/driver problem. The thing is I have not installed anything, System Restore does nothing, all the usb drivers say they are up-to-date. All USB ports are affected, even most directly on the MB.  Anyone had this happen?  I think buying windows 7 and try it because I don't want to replace the motherboard, I spent $$ on this a few years ago, raid, etc. of liquid cooling.

  It should last me awhile longer, last year the food out crapped (dust bunnies blocked fan), I replaced with a 1100 watt tagan. This system had worked great for a year, so I don't think it's a matter of P/S.

  Any help or advice would be greatly appreciated!

  Hi Highrever,

  1. do you have the latest Vista service pack installed on the computer?

  You can try to uninstall and reinstall the complete USB hub drivers and check.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer.

  You can also check if you get special material related errors in Event Viewer about what is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Flashing of the program windows with the message "not responding".

  I'm running Windows 7 Enterprise and have experienced a problem with the flashing/flickering program windows since the installation of the program. It tends to happen more, when some programs take up a lot of memory, be several excellent windows, photo editing with GIMP 2.0 program or several tab navigation in internet. The flicker can be short, but it arrived to keep it constantly. I don't know exactly, what induces it. It might have something to do with the mouse hovering over the taskbar, as the flickering tends to start when a new window will be selected. A form any of it also occurs when you type in a cell in MS Excel: I start to type in the window of a single program and finish the word in another.
  There are two options in the forums. One more course includes the passage off Windows Desktop Manager service. I tried and it seems to work. However, windows aero is off then.
  The other includes mingle with the registers in accordance with the following statement: http://www.webtlk.com/2009/06/02/how-to-fix-screen-flash-in-windows-7/. What I've avoided trying because the computer is not mine.

  So, what is the solution? This flickering is not only a cosmetic problem. In one occasion, he can freeze a program and a lot of time and also some work may be lost.

  Hi Lauri

  Sorry for the delay. :(

  You mentioned 1.5 GB of RAM, even if it is higher than the minimum requirement of 1 GB, it is weak to implement features like the Aero interface. Aero is very graphic intensive and can consume a lot of memory.

  16% of free RAM is an ambiguous number. Although you have 1.5 GB, you don't have that much physical memory available. You can check this by using resource monitor.

  Press the Windows Logo + R.

  In the Run dialog box, type resource.exe, and then press OK.

  Select the memory tab. A nice GUI appears in the physical memory section.

  An important point is the reserved physical memory. It's the memory that the computer BIOS material reserves for some hardware on the system (the installed graphics device usually consumes the biggest part). This amount of physical memory is not available for use by the system. If deduct you the number of installed RAM and then rerun your test of memory usage of crete, you will get a true number for 16%.

  Tip: you can hover over any element in the physical memory section and a description of the pop-up window for this item.

  In regards to windows offering a caveat when system resources are low, as I said before, this is what the State does not is all about. When a program is started or the memory is too low for a running program to respond timely is when you see this State does not reply and flashing that you described.

  What you can do.

  1. increase the memory by installing more physical RAM.

  2. check the virtual memory settings. Open the Control Panel/System/Advanced tab control. In the performance section, click on Settings / Advanced tab, make sure that the programs are selected in the processor scheduling section.

  In the virtual memory section, click the Edit button. Select the system drive and click System managed size. This will allow Windows allocate virtual memory if necessary.

  3. open the Control Panel control/troubleshooting. In the system and security section, click check for performance issues. Follow the steps in the resolution of the problems.

  Make sure you run the Maintenance options as described in.

  Optimize Windows 7 for better performance:

  http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance at least once a week.

  Tell us what you find.

  Concerning

• Satellite A200 starts with the message "missing operating system".

  IM wondering if anyone can help... I have a Toshiba Satellite A200, who, at the start, just comes up with a black screen and the "system of missing operating" in the upper left corner.

  I looked for solutions on the net. Nothing is really done. I tried to start in safe mode using the F8 function key, but it did not work. I tried to boot from a vista recovery disk. That did not work. I tried to reinstall vista and it came just with the error 0 x 80070002. Im stuck and don't know how started it in safe mode so that I can transfer data and then reinstall vista (reimage) on this subject.

  Can you make suggestions?

  Hello

  Have you tried to get into the Bios and check if a hard drive is recognized? If not, the hard drive no longer works. If so, try to make another copy of Windows disk.

• Windows 7 fails to start with the State of 0xc000098 error code problem

  my laptop came with a windows disc it is preloaded.

  When you try F8 start up nothing happens outside of don't go to the screen of the error.

  What should I do next

  Original title: status of problem 0xc000098

  Hello Stephen,

  We are sorry for the inconvenience. Let me help you solve the problem.

  One of the main possible causes of the 0xc000098 error may be missing or corrupt boot manager. The description of the error is related to the Windows Boot Configuration data file does contain not a valid OS entry

  As a recommendation, I suggest visit the Microsoft Help link below and check if it can help solve the problem.

  Use Bootrec.exe in the WINRE to resolve startup problems

  Refer to the section How to run the Bootrec.exe tool

  Now, one of the prerequisites before you run the Bootrec.exe tool is a Windows 7 ISO. So if you bought a full retail copy of Windows 7 earlier, you will need the product key for download support for Windows 7 directly from the download page of software to Download Windows 7 disc (ISO files) Images

  Let us know how we may be able to help you further.

  Thank you.

• Adobe Acrobat Pro DC crash with the message "not responding".

  Hi there, I just started using Adobe Acrobat Pro DC and it crashes with a message "do not answer." It was never happen with acrobat XI. Any ideas?

  I use Windows 8.1 on an Acer with AMD APU A10 - 5700 64 bit OS...

  Hello

  "This happens while accessing any PDF" or when you launch Acrobat?

  You can try to repair Acrobat, and see if that helps.

  Is there an error number or exit code associated with the error message? If so, please provide us with the screenshot of the same thing.

  You might also uninstall Acrobat using the cleaning tool. Here is the link to download the cleaning tool.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Once uninstalled, you could try to download it again. If it is a subscription, you may consult the following link.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html

  You can reboot your machine as well and then try to launch Acrobat.

  If it's a perpetual license, you have to call this one.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

  Be sure to turn off all third-party software before you begin the installation.

  Let us know how it goes.

  Concerning

  Sukrit diallo

• c: overwritten with the new xp pro operating system. Need to retrieve the d: partition.

  My brother installed Windows XP Pro installation disc from my other computer on my desktop HP Pavilion 754n without my permission and I can not access the system restore to perform a non-destructive recovery with the recovery d: partition.  How can I manually start the recovery partition to restore original factory programs?

  Thanks CheryG! I did a non-destructive control cover just to test and it worked.  I have had a few glitches and discovered that I had forgotten to delete the files from my brother of the recovery d: partition.  I have since removed them and am moving forward with the full destructive recovery.  You are a life saver.  Thanks for the help and have a wonderful Thanksgiving holiday.