Domain passwords

Similar Questions

• Laptop using Windows Vista Buisness cannot change domain password

  My laptop using Windows Vista business can't change password is field - the error message is "username or password is incorrect."

  I can connect to the network very well.

  Other users have tried to change their passwords on my laptop and have the same problem and I can change my password on another computer connected to the network.

  My laptop spends most of his time out of the network.

  Domain is Windows Server 2008r2.

  And no, I do not use the German version of Vista.

  WTF?

  Hello

  I suggest you to send your query in Microsoft TechNet Forum because the computer is connected to a domain. Here is the link for the Microsoft TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread

• Domain Password Expiration Notice

  From: Paul S

  Vista offers the same capacity as XP, when the domain user password is going to expire?  What I noticed is the balloon popup but no popup window indicating the password will expire in x days and asking the user if they want to change.  I left my password expire, then after that my machine locked due to inactivitΘ I could no longer log without changing my password on the first domain controller.  XP would give you the option to change your password if it had expired in this way.  The laptop I use has a reader of fingerprints and initially, I had a hard time get the Ctrl Alt Del screen to show up because I believe that the fingerprint software has been the substitution of the Vista login screen.  Could it be causing a problem?  I use VIsta Ultimate, but I guess that this feature would be identical to Vista Business.  Thank you.

   

  From: DevilsPGD
  

  Vista uses a popup balloon rather than interrupt the opening of session before the expiry of the password.  Take care of the ball and change your password.

  > I left my password expire, then once my machine locked due to inactivitΘ I could no longer log > without changing my password on the first domain controller.  XP would give you the option to change your password > if he had expired in this way.

  Vista does too, once a password has expired.  However, if the computer is locked and you are the active user, you may need to hit "Switch User" and then try to connect again - I'm not 100% sure on this subject, this effect can be caused by fingerprints reader software. Make sure that you are on the latest version, the software that came with mine was in trouble in the first two releases, although you might work around most of the problems using the "Change user" button, then manually enter a password if necessary.

  DevilsPGD

  Another response of the community of Windows Vista discussion groups

• No admin after a fall of domain password

  I was given a working laptop running Windows 8. A stupid move on my part has been remove the domain working group before considering local user/administrator accounts. Now when I start it is only an admin account which I have no password.

  Is there a way around it? Is it possible to make a backup and just reinstall windows then apply the back upward? There a lot of programs that I wouldn't really lose.

  Thanks for your help.

  Here is a complete list of your options at this point: http://cmdrkeene.com/reset-forgotten-windows-password

• Can't access ColdFusion 9 Admin after admin domain password change

  Hello

  We have a CF 9 MultiServer configuration that worked perfectly for the past year. Recently, a change domain admin password armed our IIS, which we worked by changing passwords for admin for each application pool in IIS 7.

  Since then, however, I can not access the Admin CF main page, which gives a 404 error. I can access the page admin for multiple sites by visiting the internal IP address of the server and specifying the port (192.168.xxx.xxx:8301, 192.168.xxx.xxx:8302, etc.), but if I try and start over for the main site of the CF Admin (port 8300), I get a 404 error.

  The guy who created our server is long gone, and even if I know enough about CF to keep things running, it has left me speechless.

  I am convinced, the problem lies in IIS, but I was wondering if anyone here has any experience of such a problem?

  Hi Simunt,

  Can ensure you that the CFIDE folder is available at \JRun4\servers\cfusion\cfusion-ear\cfusion-war?

  Kind regards

  Anit Kumar

• The JDeveloper weblogic domain password

  Hi all
  
  I'm trying to access console weblogic default domain.
  
  but I can't use weblogic/weblogic.
  
  What is the password for the user weblogic?
  
  I use Jdeveloper 11.1.1.1.0
  
  Thank you

  Try to weblogic/weblogic1.

  CM.

• Why my firewall only use the domain user name and password for login and enable passwords, not a different password enable as do it my switches? RADIUS config looks the same...

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  Question:

  Firewalls Cisco requires that one level of password, i.e. the domain user name and password are used for logging as that to reach the global configuration mode.

  Background:

  We have several network devices Cisco, put in place who authenticate to our Windows using NPS (Windows 2008 R2) DC. Switches we have implemented the function exactly as we would wish that they need your domain user name and password to connect to the device. Then they require a separate password when you use the enable command, it is stored in Active Directory:

  Switches:

  User name:domain-username

  Password:password-field

  SWITCH >Activate

  Password:Enable-password - to-Active Directory

  SWITCH #.

  Firewalls (as they are now):

  User name:domain-username

  Password:password-field

  Firewall >enable

  Password:password-field

  FIREWALL #.

  With the firewall, however, they require your domain user name and password first and then your domain password again when you use the enable command. I want to reuse the firewall to use the level that currently switches enable password rather than the password of domain. The appearance of the current configuration as follows:

  Current configuration of the switch:

  AAA new-model

  AAA authentication login default local radius group

  AAA authentication enable default group enable RADIUS

  AAA authorization exec default local radius group

  AAA - the id of the joint session

  ACCT-port of 1645 auth-port host 192.168.0.1 Server RADIUS 1646

  Server RADIUS ports source-1645-1646

  RADIUS server key 7 1234abcd

  Current configuration of the firewall:

  RADIUS protocol AAA-server DC01

  AAA-server DC01 (outside) host 192.168.0.1

  authentication AAA ssh console LOCAL DC01

  Console to enable AAA authentication LOCAL DC01

  1234abcd keys

  Any help would be great, thanks!

  You must use GANYMEDE + instead of RADIUS for this.

  Here, you can use command sets in the results section of the policy.

• password screen changes when disconnecting the domain

  I'm a domain administrator.  My ad servers are Server 2008 R2.  I have a Windows 7 user who has let the password expire.  We changed his password on the domain controller.  He is now in a State of limbo where his new domain password only works for log after the screensaver when it is disconnected from the domain.  Whenever the screen saver is used, must be disconnected from the network.  Then his password works for screen saver to leave it on his laptop.  Then it can connect to the network again.  The same domain password works for e-mail and VPN, but it does not work for the screen saver when it is connected to the domain by VPN or hard wired.

  I don't know what to try or look to find this problem.

  OK, I don't know what to try.  I'll take the laptop out of the field and then add it to the.

  Yes, that fixed it.

  I'll post this in case someone else has a mental block as I did.

  Hello

  Your question of Windows 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Creating password policy error: Incorrect domain name

  Hi people,
  
  I am getting rather strange error ('Incorrect domain name") while trying to create a new password policy in OAM to activate the user account locking. I provide a name for the password policy and use the simple field of policy, I created in the 'domain password policy", as well as some fundamental values. I know it is something simple, and yet I can not understand why the domain name would be incorrect.
  
  Any help is greatly appreciated.
  
  Thank you
  Roman

  Hello

  "Domain password policy" is usually the domain of the user (for example: or = users, dc = abc, dc = com). You can try on the same day?

  -Aravind Pramod

• T510 AD expired password

  I'm in an environment Windows Terminal Server R2 2012. All servers, including my domain controllers are 2012 R2. Currently, I am working on creating a password policy to force users to change their domain password every 60 days.

  Password policy worked on the thin client T5550 once I disabled local authentication on the client and the RDP session request credentials when it hits the server.

  My problem is that I can't find the place to do it in t610 and t510 models. She wants if authenticate to the Thin Client operating system that works when you are not required to change your password, but once the password expires or is the force of change it will not allow the user to connect.

  The T510 is running an exclusive HP operating system and no Windows CE or Embedded as my former models. I tried to flash with windows, but it is not registered on the machine and won't take.

  Any suggestions would be much appreciated.

  The following manual will give you more details on the T510.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=5226831&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c03817821%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

  The T510 and T610 are compatible with WES7 ( Windows Embedded Standard 7) operating system.

  The following manual describes how to upgrade the key for authentication.

  http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c03162530-2%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• Create a scheduled task and deploy on all computers in the domain

  Hi all

  I have the following requirement:

  I need to automatically run a program of cleaning (Glary utilities) on all computers at a time as 10:30 on all computers in the domain. Also all by running the UAC program block and ask the admin domain password every time. I need only this program to be run as a domain user and run at the precise moment on all computers in the domain at a time. How can I do this? Help, please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Connect to the WLAN domain

  I am trying to achieve a business solution for the connection of the laptop.

  We have several hundreds mobile computers that need to connect to our area at various locations (home, Café-restaurants, etc.) and we have a problem with the connection to the laptop without wireless connection. Our users must use VPN to connect to the domain, but of course, they have to connect to some router wireless is nearby in order to establish the VPN connection. I used the credentials manager cache their credentials in the field locally, but another tech had a concern about password changes. We need to change our passwords every 90 days, and it would be very inconvenient for all involved move to users that they must change their password in the credentials manager, as well as in Windows. Credential manager auto update when the domain password changes? If this is not the case, will be locking their account when they try to connect after changing their password? If it works, is it possible to tell all laptops to locally cache credentials via GP? Or users will have to do it themselves?

  Second question: If the foregoing will not be the causes of work, or simply too many headaches, is it possible to connect to all that is WiFi, currently (and follow the guests/answer the questions that appear after the connection is made) in order to establish the VPN before logon? I know that the wireless profile thing, but we will not present to add a profile for each wireless router, to which they connect, and have users trying to do would be a total disaster! Is there a solution to this problem? Any help would be much appreciated!

  Chances are you will need to post the question here because it was such a configuration.

  https://social.technet.Microsoft.com/forums/en-us/home

• I want to prevent the use of the login and password of CentOS 6.5 to the shared folder Windows 7

  Recently, I lost my hard drive Windows 7 Pro to crash and had to rebuild the laptop from scratch. I have set up the laptop to share files on the local network with XP, Vista, and CentOS 6.5 PC. The file sharing (without need of login/password) with all PC work with one exception.

  When you use the 'of' the CentOS PC file manager to access the shared folder on Windows 7, I am invited with login/domain/password popup box. I enter the credentials and everything works well. And I have to do it once. The same user name exists on all PCs. But I think the connections via file sharing simply under "guest" or "annonimus. The race of Samba (SMB) of the computer of CentOS version is version 3.6.9. I have tried so many combinations of solutions and none seem to work. See the list below:

  Windows:
  Edit local security policies
  Remove the TransportBindName (then add back)
  Set UseNewSmb = 0, then returns to 1

  Samba:
  security = share and then I tried security = user
  client NTLMv2 auth = Yes and return to no.
  NTLM auth = none and return to Yes

  I am hoping there is a configuration that will prvent the annoying popup login/password.

  It seems that my problem has been solved (for me at least). Discovered by searching for another detachment of TechNet
  Listed below are the changes. I doubt that all were required, but there still Big Bang solutions seem to always work when dealing with Microsoft operating systems, Yes?

  The registry

  1 KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
  DATA: everyoneincludesanonymous = 1

  2 KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
  DATA: NoLmHash = 0

  3 KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
  DATA: LmCompatibilityLevel = 1

  4. KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters
  DATA: restrictnullsessaccess = 0

  In the policy editor of local security under the Security Options folder

  1. Microsoft network client: password is sent unencrypted SMB third party = active servers

  In the network sharing Center

  1. go to the advance sharing settings page

  2. Select: Activate sharing files for devices that use encryption 40 or 56-bit

  Test:

  1. reboot Windows 7

  2 reboot the Linux server

  3. open Linux Network Browser (Thunar) application

  4 navigate in the actions of Windows 7 without having to enter the login/password: success!

• Cisco ACS user password change?

  Hi all

  Even if I don't check "Change Enable by PEAP password" setting on Cisco ACS, when a user tries to log on to the wireless network, whose domain password is going to expire, receives a popup on Windows XP, saying that their password is about to expire?

  Is this normal?

  PS: Check the screenshot attached.

  ACS is not able to send these messages for wireless users.

  He sends the AD.

• Registration user authentication failure - ESSO password reset

  We finished ok configuration and completed the questions for users ok registration. Then, during the recruitment of a user on the web site (http://iis8-server/vgoselfservicereset/enrollmentclient/EnrollUser.aspx), domain and user (domain\username) are detected ok.

  BUT when you click on 'start', the following message appears:

  "Could not authenticate the user. Please contact your administrator. "

  The installation environment is the following:

  -Enterprise Single Sign-On password resets 11g Release 2 (11.1.2.2).

  -Windows Server 2012 with Active Directory.

  -Standalone Windows Server 2012 (domain member server) with: 8 IIS and ESSO password reset server.

  -Service accounts: SSPRReset and SSPRWEB are configured and valid domain passwords that are not locked. And both accounts are members of the group "Domain Admins" and "Local Administrators" in IIS.

  -Self Service password reset service is running on the web server of ESSO - PR SSPRReset account.

  Could someone please help us find a solution?

  Thanks in advance!

  Finally, we solved the problem with this configuration:

  The IIS with ESSO password reset server had one turn on the 'Web services' virtual directory with anonymous authentication. We changed to disable and solved the problem mentioned.

  The final configuration (that works) of this environment is:

  Virtual directory: EnrollmentClient

  Anonymous authentication: disable

  ASP.NET impersonation: activate

  Digest Authentication: disable

  Forms authentication: disable

  Windows authentication: enable

  Virtual directory: ManagementClient

  Anonymous authentication: disable

  ASP.NET impersonation: activate

  Digest Authentication: disable

  Forms authentication: disable

  Windows authentication: enable

  Virtual directory: ResetClient

  Anonymous authentication: enable

  ASP.NET impersonation: disable

  Digest Authentication: disable

  Forms authentication: disable

  Windows authentication: enable

  Virtual directory: WebServices

  Anonymous authentication: disable

  ASP.NET impersonation: activate

  Digest Authentication: disable

  Forms authentication: disable

  Windows authentication: enable