Connect to the WLAN domain

Similar Questions

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Satellite Pro A40 can't connect to the WLan using the Win XP

  Hi all

  Newbie on your site so thank you in advance for your answers ;-)

  Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

  Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

  It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

  Any ideas please?

  Thanks Mike

  Hello

  First of all, you must update the WLan driver.
  I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

  In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
  If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

  Last but not least, you can try to use this command in a DOS (CMD)
  Ipconfig / renew

  Big names

• Satellite M70: I can't connect to the WLan access point

  I have several wireless laptops, all work fine - except my M70.
  I use Intel Proset, and he sees the access point, but says "unable to connect" when I try.
  The signal is high (2 meters distance).

  I tried with WEP, WPA and without security. I am absolutely convinced that I entered the right keys.
  The access point is a Belkin Pre - N-, but I tried with a point of access 3Com, with the same problem - my Ipaq, my other PC, and all guests can connect,- but not my Toshiba!
  The wireless card is the standard Intel, with the latest driver from October 2006 intalled.

  Getting desperate...

  Hello

  If you get a signal strong, so I guess that the laptop is already connected to the access point. Or am I wrong?
  On my laptop, the computer WLan small icon appears only if I connected to the Wlan and then I can see the State of the signal.

  However, you suggested to use the Intel Proset utility to configure the WiFi network but on the clean Windows configuration. Have you tested it?

  This question seems very strange to me.
  Sometimes it of not possible to connect the WiFi network because of poor compatibility between the router and wireless network card.
  My router supports Wlan AB mode and my second card for computer laptop support BG.
  That's why I m not able to connect to the Wlan. Maybe it s also your case.

  On my router, I can also put the MAC address filtering. You should check this option on your router.
  But generally it is not easy to say why it happens. You know you should check every single option and if it s not possible so I guess that it s a compatibility issue.

• Questions about the connection to the Windows domain

  Salvation Group:

  Is there anyway to force the connection to the windows domain? I have

  don't want users to connect to their local account.

  There are number of login script I want to run

  on the computers of the users. Thanks for the help!

  Click on the text in performance and Maintenance, administrative tools and then double-click local security policy to start the local Security Policy Management Console.

  Under security settings, expand local policies item by clicking on + (plus sign) and select Security Options. Double-click Interactive logon: do not need CTRL + ATL + DEL, click the enabled option button and click OK.

  Regarding the script process is concerned, I recommend that you check out (good!) M Script Center $ (http://www.microsoft.com/technet/scriptcenter/default.mspx). Please be careful with the scripts, especially if you work in a corporate environment...

  Good luck

  Josef.

  PS - please rate the usefulness of the post.

• Don't allow the computers in the domain to connect to the WLAN

  I'm going in circles here.  First of all, I apologize for posting this question if it has been included in the past (if you have another thread to offer, I invite you to point me to it!)  I did a little research on several forums and articles and support sites.  But I'm missing something.

  I work with HP Procurve 420 access points (they bought these before starting.)   I have Cisco Secure ACS for windows 4.2 installation.  I have configured the external database group mappings to active directory and vlan assignment by group dynamics.  I have install the certificate from the ACS, and CA is our own ca on our network server.  Users can successfully authenticate and connect to the vlan appropriate right now.  That's where I'm stumped.  I want only our computers to connect.

  1 how/what/where can I go from here if I want only to allow computers on our domain to connect to the connection wireless company?   Set up some kind of another certificate that gets distributed by GPO or something?  Or is there something in ACS I can change?

  2. What is the ACS certificate, I already installed on the ACS server do?  Is it encrypt the authentication process that takes place when a user establishes a connection?

  3. How do you guys did this on your own networks?  I go about it the wrong way? What do you suggest me?

  The final goal is that I want a user with a laptop of society must be able to connect to the wireless network and to authenticate and to be placed in the appropriate vlan (which works now), but I won't be able to do it with any device, I would like to some how manage and restrict computers can connect.  Help, please!

  1. I think that you can use the group mapping (see page 603 of the ACS 4.2 user guide) to use the domain computers group.  Deny access to any other group (via the No. Access Group)

  2. to the Spiderbeam of each EAP conversation, the ACS server will provide the certificate as proof of who he is.  If the client trusts the cert, then the client will continue authenticatin process.  It's how you help ensure that your clients connect only to your network.  If you configure clients to ignore the cert, and someone else is a network with your SSID, your customers can try to connect.

  3. many companies to complain about not being able to contol that devices connect to their networks.  It is a way to do it.  By simply using PEAP with user accounts, any portable computer iPhone/iPad/staff / anything that can connect to your wireless network, if the user knows how to set up.

  If go you ahead with this, please post back and let us know how it works.

• Tecra A11 - 17V unable to connect to the WLan

  I have a Tecra A11 - 17V 15.6-inch and the problemis that i can´t get conection WiFi at home.
  With all of the other devices I come in my WLAN and the Tecra also in others, but not in mine.

  It is a WPA2-PSK AES and 128-bit encryption.

  This may be the cause?
  Best regards

  The wifi connetion couldn't work for different reasons.
  That is to say the Wlan standard could not be supported, or there might be a problem with the compatibility of encryption.

  You can perform a simple check.
  Disable the wireless encryption in your router settings and try to connect to the laptop to open Wlan (unsecured).

  Of course, this should be done just for testing purposes and the Wlan must be always well attached.

• Equium A200: Unable to connect to the Wlan - no IP address of the router

  Dear readers

  I have a laptop Equium A200 Toshiba.
  I TI a year, a little more of it and it did work under Vista perfectly, no problem.

  First of a sudded 4 weeks ago my wife told me that she can no longer connect to the internet.
  I thought that it was something less serious, until I couldn't solve the problem.

  The laptop is not receiving an IP address wireless or cable modem.
  I type cmd and I get an IP starting with 169 in wireless and wireed cases.
  I also tried to reset the NETWORK card, but it does not work.

  It's frustrating seriously because we don't change anything on the other machine, then let updates automatically, this is obviously some update that triggered connect to stop the local distribution of load and internet access now it shows only local access.

  Appreciate any help out there on root causes.
  So far not much dad worked. R/Paulcou

  Hello

  In your case, I would first check the settings of the router.
  I put t know what settings of your router is compatible, but you should go thought the simple options (such as when the first router configuration) and should check if everything is set correctly.

  In addition, you should check the settings of WLan connection. In the properties of WLan connection, you would find the TCP/IP protocol. Check the properties of the TCP/IP Protocol and set all parameters (IP address, getaway, etc.) to get automatically.

  If all of these settings are set correctly, then start the console (CMD) and use the command:
  ipconfig / renew

  This should refresh the IP address and in most cases, it helps.

  Last but not least, you should check if you can update the WLan driver!

• Unable to connect to the WLAN router satellite P300

  Hello everyone,

  I hope you can help me with my problem.

  I bought a Satellite P300. Now, I'll have some connection problems to my fritzboxfonwlan over a wlan network.

  When I connect my laptop via a cable, all right. Only with wlan i´m problems.
  My router ssid is displayed correctly. I can also type the key. But then the router is not to be found.

  I use as wpa2 encryption.
  I think that Vista has problems with it. Vista has also the most recent updates and my wireless (intel agn5100) card.
  I tried all the three drivers on the side of toshiba. I Don t know what I can do next.

  If you have any ideas, I'll be happy to hear it.

  Hello

  Have you checked if the address Mac filtering settings can affect the WLan functionality?
  If the MAC address filtering enabled your WLan card mac address has been inserted, then your laptop wouldn't connect.

  Also I recommend you check the settings of the WLan card TCP/IP.
  In the TCP/IP properties, you must set options for automatically

  PS: have you checked whether your P300 is the latest BIOS?

• Satellite A500 - unable to connect to the WLan

  I'd like someone to help me.

  Have recently bought a satellite A500.
  I'm new in the world of laptops so I'm wrong.
  I connected to a router via a modem, the two netgear, the news.

  Had the two config for my network. Works well as long as ethernet is connected to the router of computer.

  My wireless icon on the front of the laptop is orange.
  If this should be green as the router?

  Pressing FN f8 it tell me wireless is connected.
  When I remove the ethernet cable it tell me to fix the problem, I need to plug in the ethernet cable.
  But I want to go wireless, I'm sure I'm missing something.

  Rang netgear but after that my router and it is not connected to wireless technology they could help me more.
  I use windows7.

  Thanks to anyone who can help me.

  > My wireless icon on the front of the laptop is orange.
  > Should it be green as the router?

  The WLan led can only be ON or OFF. If the light comes on (any color) then it means that the Wlan switch is on!

  It seems that the WiFi is enabled. In this case, you will need to properly configure the WiFi network.
  You can use the own WLan settings in Windows or a Wlan configuration tool like Intel ProSet utility.

  First need choose the right SSID (wireless network name), right of encryption (WEP, WPA, etc.) and password encryption.
  Please note that all of these parameters should be the same on the router WLan and WLan configuration software!

  Please check if the firewall does not affect the connection to the internet as well!

  PS: make sure you use the latest version of the WLan driver
  Here you can find the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, search and read comments here on the forum!

• Satellite L505-144: unable to connect to the Wlan 802.11 N

  Hello, I hope someone can help me with this

  I've updated my old network wireless at home so I can stream media.
  I replaced my old netgear G router and bought a netgear DGND3300 dual band N router to the hub and a WNDA3100.

  Office everything is set up ok on these as I can connect up to 300 kbps, which is good.
  The current settings for the router are:
  Up to 130Mbps at 5 GHz & 54Mbps 2.4 GHz"
  channel 36 = N
  Channel 11 = G

  Although the problem is the laptop.
  Now, he says that the wireless laptop is N. When I connect to the router it connects only when G setting and I only have until 45 Kbps.

  Is there a way so that it can connect to BOTH channels to get the full speed or the wireless laptop is only a single tape device?

  Thank you
  Steve

  Hello

  Built into the laptop LAN card is a Realtek RTL8191SE 802.11bgn.
  As you can see the wireless network card supports three WLan standards; 802 11 B, G and N.

  First of all, you must make sure that more recent Wlan driver is installed;
  New WLan driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, you should check if 802.11 N standard has been chosen.
  You should do this in the Device Manager-> card WLan-> properties-> Advanced tab.

  Welcome them

• S70 - A satellite fails to connect to the WLan

  Hi all

  Here I am having big problems with my connection Wireless on my S70 - A

  The connection continues to be cut off unexpectedly (like a reset of the network card) to find an internet connection that I have to turn off the wifi and re-connect manually...
  Of + WIFI signal LOW everything which is my distance with my box.

  The PC detects my wifi signal (it seems to be the most), I click on it to connect and then I fall directly on the 2 bars of reception! of course my wifi settings and keys are configured correctly...
  The PC is new, dating back to June 2014.

  Here's the conf:

  S70 - A SATELLITE
  WINDOWS 8.1 6.3.9600
  BIOS VERSION: 1.60
  processor Intel core 2.4 GHZ CPU I7-4700MQ

  Microsoft Virtual wifi adapter Direct
  Adapter type: IEEE 802.11 wireless
  Qualcomm-Atheros AR956x Wireless Network adapt
  Adapter type: IEEE 802.11 wireless
  Qualcomm-Atheros AR8161 PCI - E Gigabit Ethernet Controller (NDIS 6.30)
  Adapter type: Ethernet
  Software Loopback Interface 1
  Adapter type: Loopback
  DRIVER DATE: 11/2013

  If someone had an idea, should I a fair gift NIC? or something to change...

  Thank you in advance for your help, regards

  The weak WiFi signal could be related to parameters that are in energy saving Windows power management.

  It of possible to change the power to save the settings for different portable devices and generally depends on the use of the laptop. In case you use the battery mode, you can change the setting to increase the battery working time. But generally, this affects the performance of the device.

  Here's a nice technical document how to manage these settings (it of currently for Win 7 but very similar to Win 8 or 8.1 Win)
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  I recommend you to choose the most efficient setting of PCI Express wireless adapter settings
  By the way: in many cases its helpful to change the configuration of the WLan router. Try to use different channels (1-11) and different encryption (WPA / WPA2 TKIP AES)

• Satellite C665D is unable to connect to the WLan

  Hello

  My in-laws are staying with me and their C665D does not connect to our wifi network.
  I can't turn on the wifi settings.

  I looked in to network adapters Device Manager and there is no present. I tried to add a new device through "manage wireless networks" and he says "Wireless is not currently enabled.

  If I try to manually add a wireless network it comes up with 'windows wireless service does not work.

  Look forward to some help on this one

  The error "the windows wireless service does not work" indicates that the Wlan service has not been started.
  Why? I don't know, but you can try to activate this service first.

  To manually start the wireless service, i.e. the WLAN AutoConfig service, perform the following steps:

  1. connect to the computer as an administrator.
  2. Click Start, type services.msc and press to enter.
  3. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  4. on the general tab, change the startup type to automatic and click on the Start button.
  5. click on apply, then ok.

  Then try to connect to the wireless connection and check the result.

• Qosmio X 300-13 G - unable to connect to the WLan router using Project N

  Hello
  I purchased a Qosmio X 300-13 g (the only one available in Portugal :/) and I tried to connect it to a network wirelles N, but I always get an error message):
  Windows could not connect because the defenitions of the router are different from your...

  Well you know why? I tried with several routers, and it is always the same...

  TKS

  Concerning

  Is your WLan router supports 802.11 N draft standard?

  Did you choose N draft standard on your WLan router?

• Unable to connect to the WLan satellite E300

  Hello

  I also bought a new Toshiba e300 Satellite yesterday. I have the same problems and have updated to the latest firmware. What is complicated is, I have 3 other laptops (mac, more old toshiba & acer) and 3 iphones, they are all able to connect to my wireless network and it's only the new toshiba which cannot.

  Other devices could see other local wireless in my neighborhood networks, while the new toshiba could see that my own wireless with only one bar of signal strength.

  Looks like the Atheros device is the only issue. Your feedback is greatly appreciated.

  >.. .updated to the latest firmware
  Firmware? Which firmware?

  Maybe from other computers laptops don't use WLAN n standard and your new laptop computer for this. Who knows what standards to use all these wireless LANs. Try to check the WLAN settings on your router and your new Toshiba.