Don't have no access switchport appears on the ASA 5505 ethernet port I am trying set up?
I've implemented Vlan1 to be named "inside" and there our internal IP address. Vlan2 is outdoors and has proper external IP address.
Problem is for some reason that I can't assign Vlan1 to any ethernet port?
Here's what it looks like:
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
I even tried Ethernet0/2 and the same thing. I run the command of ' switchport access vlan 1 "to the interface appropriately, it gives me no errors or funky indication nothing happens and boom, when I look at the config, you can see above it just appears. No error or anything.
I'm completely new to this, so rather than continue to repeat this several times (which I did for about 30 minutes) I thought I'd ask. It is a 'new' 5505 it was a refurb purchased by a client of mine, so I'm setting up from scratch more or less. Don't understand why I can't assign vlan1. If all goes well, there is a simple answer to this.
Hello
VLAN 1 is the vlan by default. When you set up or leave the configuration on the interfaces by default, these interfaces will be associated to the vlan 1 but not shown in the config on the show see the race.
Then, your output is OK and normal you have no error.
Thank you
PS: Please do not forget to rate and score as correct answer if this answered your question
Tags: Cisco Security
Similar Questions
-
Original title: trying to uninstalled McAfee Security Center provided by AOL.
When you attempt to uninstall the program I get the message "you don't have sufficient access to remove this program. See your system administrator. I'm listed as the administrator and the only user on this computer. I would like to uninstall and reinstall the program not working due to a missing or damaged file.
Hi Diana,
You are able to install/uninstall other applications of the machine?
I suggest you to follow the link given by McAfee to uninstall and reinstall McAfee consumer products.
How to uninstall or reinstall supported McAfee consumer products using the McAfee Consumer Products Removal toolHope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
OLAP_error (1020043): you don't have sufficient access - HsSetValue question
Hello
I use version 11.1.1.3 Hyperion Essbase BSO applications and get the error message below when I tried to present data using smart view. The cells contains HsSetValue formula and able to present data without the function of this formula. Please could you help me solve this problem.
OLAP_error (1020043): you don't have sufficient access to perform a lock on this database
Note:
I passed the Planning application data.
Thank you
Michel K
Take a look at this Smart View error 1020043 doc - you don't have sufficient access to perform a lock on this data base (Doc ID 1591024.1)
Kind regards
Deker P.
-
I have just designed hang tags and you want to save the file, but continue to receive the error message when I try to save. "Cannot save you don't have enough access privileges"? Help please
Try changing the location you're trying to save in.
-
Why FireFox don't have a stick and go like the other browsers?
Why FireFox don't have a stick and go like the other browsers?
What is the one thing missing from other than firfox
It's a great browserFirefox 4 will have to paste & go in the address bar using the context menu.
-
I had FF 3.0.10 for two years. My preferences are set to automatically check updates, my for a reason, it apparently never worked. I am the administrator for my Mac and have read/write permissions. The manual "check for update" under the menu help is disabled and will not work. " I tried to reset the permissions, quit and restart several times. At a given time, the window ' check for updates ' seems to be enabled, but froze when he started the download and came back to grey again. I tried to download 3.6 on your site, but when I try to drag FF in the app, I get a message that says "the operation cannot be performed because you don't have sufficient privileges for some of the items. Through it all, I noticed that my download folder is gone from the dock on my screen
- Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
- Trash the current demand for Firefox to do a cleanup (re) install.
- Install the new version you downloaded.
Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.
-
How can I reinstall Windows XP? I don't have my OEM of Windows ME records. I don't have my Windows XP to upgrade the disks I got the OEM. It was a free upgrade to Windows XP with my purchase of the computer with Windows Millennium Edition.
I'm sorry, but you will need a Windows 9 x / ME drive to provide during the XP installation from the XP disc is a version upgrade. There is no way around that. See if you can find a friend with an older operating system disk (not a recovery disk) to support qualification. Otherwise, you would need to buy the full version (not upgrade) of XP to install on the computer. MS - MVP - Elephant Boy computers - don't panic!
-
Original title: Dual boot
My XPpro on a former player, was upward. then, I got another new drive, installed Win7Ultimate. Well, I got the OLD disk works with XP on it. But, some of these apps DO WORK not on Win7. so, at least for now, I have two drives installed on the same computer. is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change? Operating systems already are on 2 different disks.
Hello
How to set up a Dual Boot Installation with Windows 7 and XP
http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.htmlDefinitive dual-booting guide: Windows 7, Linux, Vista and XP step-by-step
http://apcmag.com/the_definitive_dualbooting_guide_linux_vista_and_xp_stepbystep.htmDual Boot computer preinstalled Windows 7 with XP
http://www.howtogeek.com/HOWTO/8790/dual-boot-your-pre-installed-Windows-7-computer-with-XP/I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Pretty simple question really. I want to activate the outputs audio multiples to be active, so I don't have to wear my helmet all the time, or need to disconnect anything to the speakers. I checked the 'sound' thing in the Control Panel, but the enable option is not letting actually work. So if I want friends to hear my video games or something else, I turn on my speakers and they can hear it now.
Thank you.Windows 7, 64 bit.Audio original tittle: multiple
Windows does not support this. This is handled by the device drivers or hardware - if they don't support the outputs multiple, you can try the search for an alternative solution.
-
I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?
Just installed windows 7 but I can't read my product key?
Help me please thx!
Option 1:
If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.
Option 2:
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.
Option 3:
If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.
Brand
Online order
Phone
Acer
https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer
1-866-539-3901
ASUS
1-888-678-3688 or
1-510-739-3777
Reference Dell
http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen
1-800-624-9896
eMachines
https://secure.TX.Acer.com/rcdb/main.aspx?brand=eMachines
1-866-539-3901
Entry door
https://secure.TX.Acer.com/rcdb/main.aspx?brand=gateway 1-866-539-3901
HP/Compaq
1-800-474-6836
Lenovo/IBM
http://www-307.IBM.com/PC/support/site.WSS/MIGR-4M7HWZ.html
1-800-426-7378
Sony
https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp
1-800-488-7669
Toshiba
https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF
1-800-457-7777
-
I don't have a list of SETTINGS under the 'accounts' charms
Hello people,
I'm trying to change the settings for my email to show only 'two weeks' to show all that. However, under the 'charm' I don't have a list of "Accounts" under the spell of PARAMETERS.
Fills all the help and information are based on the ability to click on 'Accounts' - can you help me to find it?
Mr. John
The settings option is universal, so it shows that what is relevant for the program that you are using at this time. So make sure that you are within your e-mail inbox when you click on (or tap) settings. At the bottom of your email message list is also a green link that says "to display the messages over 2 weeks, open settings... ', you can click on this text to go directly to the appropriate option.
-
I bought Adobe Lightroom 6 but I don't have a CD drive to install the program. How can I download instead?
Hi Amanda,.
Please download Lightroom from the following link:
Kind regards
Bani
-
Relocation of the PS assistance when you don't have an old serial number of the previous product
Can anyone help to reinstall PS when you don't have an old serial number of the previous product? Shocked I was on NO HELP from adobe support phone for 3 hours without a pick up on my call...
If it is an earlier version, you should probably be activated phone support and possibly support both cat. It's probably the beginning of the end of the week where the phone help, which would explain your expectations... they might be back come Sunday night U.S. time... even with the help of the chat.
If the older version has been registered, it may be available through your adobe online account.
Try the chat support when they are available - or the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC ) -
I live in a rural area that does not have consistent internet access. questions: what I have to have internet access to work with the ambient light and photoshop or is the program downloaded on my computer while I did not need to be online?
That is, the work programme is located in my computer or is it online?
Thank you.
adobe (and perpetual license) subscription programs are installed on your computer. You need to be online for installation and activation, and then you must be online periodically thereafter.
with a monthly subscription, one time every 30 days is necessary to maintain your activation. for an annual subscription, all 91 days once is enough. These checks online to check your license status.
-
I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?
Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)
Maybe you are looking for
-
Please refer to the question regarding the upgrade of 3.6.15 and upgrade to 4.0.
-
I don't know if this question has been asked, I gave a glance to the community to see if they have the specific answer, I need which is: the switch must a router works properly or it can function without it to connect several devices to the internet
-
I am new user of Labview, my request is to build a complete fuctional Tester, I need to test continuity onseide 32 male pin other side is 32 female connector, continuity from one to the other point, I need your help to custmise the material and a cod
-
Impossible to install Vista SP2 or preparation _ update
preparation of Vista system error 0 x 80240009Vista SP2 error 0 x 80070490Cannot download "bugs" or explore 8 is... .Please help!
-
JNI and Labwindows/CVI linking problem
I am trying to connect to the server in Java through LAbwindows CVI DataSocket. I am able to create a dll. Everything works fine with no error in compilation or execution, but when I run the DS_OpenEx cannot return a native class. If anyone can help