Don't switch off the USB cable for HP 5520
During the installation of my new HP5520 I have connected the USB cable between the printer and my desktop PC, and then I forgot to unplug again before installing the software from the disc. Does it matter?
Hello
It might affect the installation of the printer, but if you don't see any effect, you should not have problems.
Tags: HP Printers
Similar Questions
-
He done wrong to leave the USB cable all the time?
To clarify, I like this feature of bedside or desktop clock where you tilt the phone L shaped and clock lights up.
However, I know with other phones, if you leave the USB cable all the time, this is not good for the battery.
What is the case with the backflip? I guess because Motorola announce this clock function, it's OK to do so.
DansDroid wrote:
jack58 wrote:
To clarify, I like this feature of bedside or desktop clock where you tilt the phone L shaped and clock lights up.
However, I know with other phones, if you leave the USB cable all the time, this is not good for the battery.
What is the case with the backflip? I guess because Motorola announce this clock function, it's OK to do so.
It will not harm the phone, it's the same as if you left your phone connected to your A/C charger. Once it's charged, it no longer attempts to charge the battery. --- Dan
Thanks for the reply. I should have clicked the 'right answer' not the answer 'useful '.
I now have the phone plugged in USB a/c or all day as a desk clock and so I can see alerts when they pop up and have no problems at all.
-
Windows does not recognize the USB cable for VoIP phone internet usrobotics
Can Hi anyone help
All of a sudden my computer is coming with the unrecognized USB device.I tried uninstall and reinstall, but still does not.Thank you very muchHello
I suggest you try to run this under fixit and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
It will be useful.
-
When you install the software for lexmark printer 5650 to test the logo point to install windows, then @usb or ethernet I can't complete install because it will not recognize the usb cable
Hi Spudly49.
Thanks for posting. You are using an OS 32-bit or 64-bit?
If you use a 32 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR2226&segment=support&UserLocale=en_US&locale=en
If you are using a 64 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR3915&segment=support&UserLocale=en_US&locale=en
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
can I use the same USB cable for two printers - HP Officejet 4315 and HP Officejet 6110?
I have an existing HP Officejet 4315 with USB cable and want to use the same cable replacement for my other printers, the HP Officejet 6110. This allows me to change the cable between the printer and still work?
Thank you for your thoughtful replies.
As you asked specifically about the compatibility of the USB cable, I would say that it will work because both devices support USB 2.0 (that is, both devices can be used with the same USB cable alternating).
Installation of the software for the two devices must be made successfully to use various functions.
-
How attached iPhone off to USB host for charing only
How attached iPhone off to USB host for charing only
How attached a motorized iPhone to USB plug for battery charing
without the phone starts in normal mode? The phone should simply keep turned off
and only switch to the mode of charing on its data cable plug-in / original accessory load to the USB host.
iPhone 6 s.
You cannot charge an iPhone if it is turned off, because the charger is implemented on the software, which must be supplied to do its job. However, if you plug first, then turn to it it keep the charging circuit on and off the rest of the phone.
-
I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.
Ideas, people?
Hello
This problem occurs when you make changes to the computer?
Method 1: Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/
Method 2: Refer to this link: I can not print from my computer via the USB port.
If you have problems, I haveinstall updated printer drivers, see this link:
http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420Refer to this: update the drivers for hardware that does not work properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
See also: printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsI hope this helps!
-
BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod
Hello
I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.
I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?
Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.
Thank you very much!
Hello
It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.
-
Satellite C660 powers, black screen and switches off the power
Hello world.
I have a C660 - 22v.Everything worked very well. An hour later, then to use the laptop again, it works, and he turned on as normal in 2 clicks, then more nothing. Just a black screen, not yet turned on, then after 5 to 15 seconds, the fan accelerates for a second or 2, then the laptop turns off.
Tried with the batteryout & just the charger pluged, just the battery, hold the power button, all sorts of ways, but it only of the switches off the power.
I think that the hard drive has failed. Any help would be welcome as its out of warranty (16 months).
A big thank you in advance, Neil.
In my opinion it has nothing to do with the hard drive. I assume that there is a problem of electronic power supply. I have a similar problem with my A300 and at the moment I put t know what to do.
Repair is probably quite expensive so I m thinking about selling on eBay as being faulty.Problem is that we cannot do much. What should do? You can dismount, take a look inside and put the new.
Either it works or not. I'm afraid that your problem is for the service and it must be checked by the guys from the services of m.
-
ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK
I CAN'T ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK. PLEASE HELP ME.
Hi AR7, welcome to the Forums of HP. I understand that you can not connected to the Internet. HP offers no support for this configuration, as a result, here's the method to connect to a WiFi network.
-
I tried to download pictures from my phone. She does not quite sure why, but the main problem is I can't access my camera or the photos on my phone now. I get messages like this:- camera is not available because the SD card is mounted on a PC. Unplug the USB cable from proceed. I have tried several things and finally just manually disconnected the cable, but not luck. and now also message as follows:- your content is not available because your phone is used as a USB storage device. Disconnect the USB to access your content. Would appreciate help!
Hello
1. What is the brand and model of the phone?
2. have you been able to access (or discovered) files on the computer?
3. what error do you get when you try to copy files to the computer?
4 you did changes to the computer, before the show?
Method 1:
Check out the following link.
Tips for solving problems of USB devices
Method 2:
Connect the phone to another computer and check.
Method 3:
Check if the phone includes settings to disable the USB connection.
-
iTunes does not list my ipod touch when I connect with the USB cable
I bought an I - pod and put in place, but when you plug the USB cable, I-Tunes does not show the unit. Just down loaded music in my computer for the I - Pod so that it is on that point.
Hello
You use the Apple software (iTunes) and Apple (iPod) hardware.
You must contact the Apple Support.
"IPod Troubleshooting Wizard.
http://www.Apple.com/support/iPod/five_rs/
Or the iPod of Apple communities.
https://discussions.Apple.com/community/iPod/Ipod_touch?CategoryID=221
Or ask iTunes Support.
"iTunes support-how to use iTunes.
http://www.Apple.com/support/iTunes/
"Contact iTunes Support.
http://www.Apple.com/support/iTunes/contact/
Or ask in the community Apple iTunes:
https://discussions.Apple.com/community/iTunes
See you soon.
-
Firewall: How can I SWITCH OFF THE FIREWALL on the PC
How can I SWITCH OFF THE FIREWALL on the PC
http://Windows.Microsoft.com/en-AU/Windows-Vista/turn-Windows-Firewall-on-or-off
Enable or disable Windows Firewall
If your computer is connected to a network, network policy settings may prevent you from completing these steps.
View all
To turn on Windows Firewall Open Windows Firewall by clicking on the button start, clicking Control Panel, clicking Security, and then clickingWindows firewall.
Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Click on (recommended), and then click OK.
If you want the firewall to block everything, including the programs selected on theExceptions tab, select the block all incoming connections checkbox.
You should not turn off Windows Firewall unless you have another firewall is enabled. Turning firewall offWindows can make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
Open Windows Firewall by clicking on the button start, clicking Control Panel, clicking Security, and then clickingWindows firewall.
Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Click on (not recommended), and then click OK.
See you soon.
Mick Murphy - Microsoft partner
-
I migrated from Windows XP to Win 7 64 bit. I used a parallel connection on XP and now need to buy a USB cable, is there unique specifications for the USB cable?
Thank you Auntie EM - thought it was OK, and I'm all set. Appreciate the response.
-
Type of USB cable for Laserjet CP1025 Color
I just bought a printer Laserjet CP1025 colour of HP uk online store and I took it from the box.
NOWHERE, I find a USB connection cable.
How can I plug it into my laptop to make it work without the connection cable?
What is the cable that is supposed to be?
Can someone give me the exact type or a link to order the HP, or on amazon uk store?
Thanks in advance!
Hello
To reduce costs, many printers have no USB cables inside their boxes. I think the USB cables are in boxes of printers for the only region in AP. You need a cable that is similar to:
The rounded end is for your printer and the flat end is for your computer.
Kind regards.
Maybe you are looking for
-
How do I export photos from Apple Watch
Here is whats happening. My phone was los, and there were a few pictures I havnt added. and then I found these photos were in my Apple Watch. Can anyone help me to export these photos to my Apple Watch? Thank you very much!
-
Chat timestamp is originally 10 hours.
Hello. I just got a new laptop and installed windows on this 10. After you have installed Skype, I noticed that the timestamp is set to US time 10 hours behind me. I'm on GMT + 2. No matter what I do I can't change it. I changed my profile to use the
-
Remote PVR on Slimline S5380t works not properly
I have had this PC (Slimline S3580t with TV tuner) for a few weeks now and I'm having problems with the PVR remote control. It is difficult to operate reliably. Point the remote control at the Slimline PC and press on and nothing happens, I get close
-
I need a vista clean reinstallationof. I jave an Acer laptop and I have the key product for the vista operating system installed which has completely disappeared. How can I get a copy of vista to reinstall?
-
Crashes Windows to restart or stop
Hi all... I use a sony vaio with windows 7 Home Basic preinstalled in it. When I restart or shut down my pc, it crashes and a pop up appears saying that windows is waiting for a program to be closed. but in the Task Manager, no application is conside