DONKEY for gamepads/Joysticks

Similar Questions

• I can't find drivers for my joystick is possible to use it?

  Hello guys!

  is it possible to reuse my joystick to play games?
  I can't find drivers for my joystick.it is a blue mark loong vibration joystick...
  Please help me its frustration...

  The best you can do is to go to the manufacturers website and check if there are drivers available. If there is no drivers, you will need to consider investing in a new joystick that supports Windows 7.

• Need to manudal user for SideWinder Joystick for Windows 95, 98 or XP

  We are looking for the manual of the user and the software for a Joystick of SideWinder for Windows 95, 98 or XP. Do these still exist?

  Reference No.. X 05-92626

  Hello

  I suggest you to contact the Microsoft Supplemental Parts team to check the availability of the manual.

  See the link.
  http://support.Microsoft.com/kb/326246

• Apply button seup Panel for new joystick on microsoft combat flight sim

  On the GCC a panel pops up saying theres a new connected controller and you want to reset, click Yes and new Panel with the new name of controllers appears, on the Panel there are two boxes with Addvanced and properties, click Properties, new Panel with display of Rotation-boite-xaxis/yaxis-buttons1-7-hat Zaxis Z. At the base of the control panel theres three boxes-1 OK - 2 cancel apply 3, 1 and 2 works with the mouse but No3 the button apply will not work with the mouse, it is a response to response posted

  Hello

  I suggest you get in touch with the Combat Flight Simulator, with the help of the link below and check if it helps.

  https://www.Microsoft.com/games/combatfs1/

  Hope this information is useful.

• Satellite A300-Y00 - how to use a joystick for games?

  How can I connect my Satellite A300/y00 with joystick so I can play without a keyboard because its very difficult to use?

  What one should I get, like joystick ps2 or gamepad xbox since the microsoft xbox and im using microsoft software such vista...?
  But my laptop has what we call the game controller in the Control Panel, it means that I always install the software to use the joystick?

  Thanx

  It s your choice what joystick you want to buy. Go to a computer store and take a look at all the joysticks and buy one of them.

  Normally you need a driver for the joystick, but the joystick should be bundled with an installation disk that contains the drivers.

  Good luck!

• How and where should I go to find out how to configure my joystick so I can use the joystick to use the flight simulation game that I bought from microsoft?

  I can't find out how to configure my joy (attack3) stick to play Flight Simulator. I don't want to use the keyboard on my computer to steal the game... Where can I find the instructions on how to configure and use the joystick?

  Hello

  1. what happens when you connect the joy stick?

  2. do you get an error message?

  3. what version of Windows are you using?

  Perform the steps mentioned below and check if that helps:

  Step 1:

  Flight Simulator x: using a gamepad

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16624

  Step 2:
  Usually, vista Windows 7 will find and automatically install the necessary drivers when you plug your game controller into your computer.

  (a) connect the joystick to the USB port via the adapter.

  (b) see if it is detected.

  (c) Windows should recognize the new hardware and set in place to work properly.

  If this isn't the case, install the relevant drivers for gamepad for the manufacturers Web site.

  Step 3:

  I suggest the following steps and check for the device.

  1. in Control Panel, open game controllers. To do this, use one of the following methods:

  a. click Start, typejoy.cpl in the Search box and press ENTER.

  2. click on your game controller, and then click Properties.

  3. on the Test tab, test the game controller to verify functionality.

  Here is the link:

  http://support.Microsoft.com/kb/831361

  I hope this helps.

• loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

  loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

  Hi Li-ngme,
   
  (1) have you installed drivers for the joystick correctly?
   
  It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

  Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

  If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
   
  ThaThanks and greetings:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• I can't use the Xbox 360 controller for condemned Criminal Origins

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I can't using a wired Xbox 360 controller as a joystick for the origins of felons game.
  • I looked online for a solution and close using joy to key. I could map each button and it was totally functional, but I was still unable to turn or to consider, if I could walk because I had mapped the left analog stick for market controls. I tried to change the settings for the joystick in the game, but they are not what I noticed at all.
  • the game recognize at least some controller, when the mapping in the keyboard settings, it recognizes the buttons, but not the triggers or the analog sticks.
  • I tried to update my drivers, I tried different usbs and always made sure that it was connected, all of the simple things.
  • I really want to play this game, and I'll be really disappointed if I have to use the keyboard and the mouse to do it, I'm not comfortable at all to aid in a fps game.

  Thanks for your help!

  but in fact I ended up understanding.

  apparently my controller was defaulting to an old driver or the wrong driver or something, so the game incorrectly recognizes it. at least partially wrong.

  the old, updated, deleted totally worked! for the most part, had yet to use joy to key to map triggers, and the d - pad is recognized as a button, instead of four separate.

• I try to use my Pro of Logitech Extreme 3D Joystick in Microsoft Flight Simulator.

  I just started trying to use Microsoft Flight with a new Logitech Extreme 3D Pro joystick.  I can't get the game to retain the possibility of using the joystick instead of the mouse.  The joystick is listed in the drop-down list under Options, but if I select that and click on I accept, the joystick does not work, nor is the selection of the selected game controller.  (If I go back to Options of the mouse is always selected as peripheral input.)

  original title: joy of microsoft flight stick

  Hello

  Did you download the software and drivers for this joystick again?
  Click on the link below and look to the right of the page under "download software".
  http://www.Logitech.com/en-us/441/291
  Select your operating system and download the software. You may have to restart, but that should clear up the question that you see.
  I hope this helps!

• VAIO vgn-fz340e win7 driver for the mass storage controller

  Error MESSAGE: Mass Storage Controller does not.

  Location: PCI bus9, function2

  The drivers for this device are not installed. (Cod28)

  My laptop VGN-FZ340E vio, point Win7Hardware alerts to donkey for a update driver for win7 mass storage controller cannot find an update.

  Anyone have any ideas?

  Please help me.

  Error MESSAGE: Mass Storage Controller does not.

  Location: PCI bus9, function2

  The drivers for this device are not installed. (Cod28)

  My laptop VGN-FZ340E vio, point Win7Hardware alerts to donkey for a update driver for win7 mass storage controller cannot find an update.

  Anyone have any ideas?

  Please help me.

  Visit the web page of the manufacturer for your specific model?
  http://eSupport.Sony.com/us/p/model-home.pl?MDL=VGNFZ340E&template_id=1&Region_ID=1&tab=download#/downloadTab

• ADT command-line package - how to add a DONKEY?

  Hello

  I need compile an iOS from the command line application.

  How to add a DONKEY for a package of command line?

  That's what I have so far:

  ./adt -package -target ipa-app-store -storetype pkcs12 -keystore iOS7.p12 -provisioning-profile Foo_DragDrop_iPad.mobileprovision Foo_iPad.ipa Foo_iPad-app.xml Foo_iPad.swf FooIcon29.png FooIcon40.png FooIcon48.png FooIcon50.png FooIcon57.png FooIcon58.png FooIcon72.png FooIcon76.png FooIcon80.png FooIcon100.png FooIcon114.png FooIcon120.png FooIcon128.png FooIcon144.png FooIcon152.png FooIcon512.png FooIcon1024.png Default-Landscape.png 
  

  I hope someone can help me!

  jjust include it at the end of your line. aneFileName.ane

  don't forget to specify your - extdir

• Tutorials on Game Center integration for iOS?

  I am developing an iOS game and I really want to use Game Center, I noticed the new game SDK 1.1 has game Center for Flash Builder integration, but Ive never used before and have no idea where to start. I can't even use the samples.

  A tutorial on how to set up would be nice if you could point me in that direction, (I tried google without result).

  In addition, DONKEY for Game Center are usable via Flash Builder and Flash not Proffesional?

  Thank you, Jordan.

  GameCenter into your application, you need to do following steps:

  (1) create a https://developer.apple.com/ development provisioning profile, in which the store GameCenter technology is activated. You can do this by visiting the following link:

  https://developer.Apple.com/library/iOS/#documentation/IDEs/conceptual/AppDistributionGuid e/ProvisioningStoreTechnologies/ProvisioningStoreTechnologies.html#//apple_ref/doc/uid/TP4 0012582-CH14-SW1

  (2) after creating provisioning profile, login in the https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa using the same credentials with the help of which you create your profile. Click on the tab "Manage applications" and then press the button 'Add new App'.

  (3), fill in the name of the application, and select the ID of beam using which you create your profile provisiong and click on continue.

  (4) click on manage the GameCenter button and add information on ranking and achievements for your application.

  (5) to integrate the game Center API in your application, you can refer to the documentation to:

  http://www.Adobe.com/devnet-docs/gamingsdk/anedocs/com/Adobe/ANE/gameCenter/package-detail .html

  (6) after all this package of your application by using the provisioning profile created in step 1.

  All that available the donkey with GamingSDK 1.1 can be used with both Flash builder and Flash Professional.

  Please let me know if you need other information.

  Thank you

  Sakshi

• Can't find lib when packing for iOS

  You can see the same thing about StackOverflow here:

  http://StackOverflow.com/questions/11547515/cannot-find-lib-when-packaging-for-iOS

  Hello

  I develop a Native Extension of Air (ANE) in order to use ads burstly (1) on mobile devices.

  As for my setup, I use FlashDevelop and Adobe Air 3.3 4.0.4(2) (3). I use Flex SDK 4.6.0. The project is configured on Windows7.

  In order to work on iOS devices, Burstly requires a number of frameworks and librares (4)

  I managed to write and compile the library .a for iOS. I also have the (actionscript code) interface that is shared for Android and iOS compiled into a SWC and a librairy.swf. All this is correctly packaged in a .ane which is included in my project.

  When compiling a library .a on MacOS, the framework and the library used seems be packaged in the ".at". That's why I had to use Air 3.3, for the option (5) - platformsdk.

  As I work on Windows, I followed the instructions in this post for the iOS SDK (6).

  Suite (4) and (5), I did a file platformConfig.xml like this, which is packaged in the .ane

  " < platform xmlns =" http://ns.Adobe.com/air/extension/3.1 ">

  < > 4.2 sdkVersion < / sdkVersion >

  < linkerOptions >

  <! - to use the setting AssetsLibrary - >

  < option > - framework AssetsLibrary < / option >

  < option > - frame AudioToolbox < / option >

  < option > - framework AddressBook < / option >

  < option > - frame AVFoundation < / option >

  < option > - framework CFNetwork < / option >

  < option > - framework CoreLocation < / option >

  < option > - frame MapKit < / option >

  < option > - frame MediaPlayer < / option >

  < option > - framework MessageUI < / option >

  < option > - OpenAL framework < / option >

  < option > - frame OpenGLES < / option >

  < option > - QuartzCore framework < / option >

  < option > - frame StoreKit < / option >

  < option > - framework SystemConfiguration < / option >

  < option > - framework Foundation < / option >

  < option > - frame CoreGraphics < / option >

  < option > - libsqlite3 < / option >

  < option > - libxml2 < / option >

  < option > - libz < / option >

  < / linkerOptions >

  < / platform >

  and he comes to the line to compile the actual .ane

  Call "% FLEX_SDK%\bin\adt" - package - target ane... /Release/burstlyadsextension.ane extension.xml CFC - burstlyAds.swc - platform iPhone-ARM library.swf libBurstlyAds.a platformoptions - platformConfig.xml

  Problem when I try to the iOS with ADT application package:

  Call adt-package - target % TYPE % TARGET %%d OPTIONS %%d %-extdir SIGNING_OPTIONS lib, "OUTPUT % ' % '% APP_XML %' % FILE_OR_DIR / external/platformsdk... /Libraries/iPhoneOS5.0.Sdk/

  in this case:

  "ld: library not found for--libsqlite3.

  "Compilation failed during execution: ld64.

  management seems to be added very well, but the dylib aren't. I tried to add the line:

  < option >-L usr/lib / < / option >

  before including the lib, but I got this error instead:

  "" ld: WARNING: directory not found for option '-Lusr/lib / ".

  LD: library not found for--libsqlite3

  "Compilation failed during execution: ld64.

  I tried to use the full path, another relative path, but any way I put in the option, I still have a "warning: directory not found for the option. Even "< option > - L... / < / option >" give me this warning. The only thing that seems to work is "< option >-L /... / < / option >", but my obviousle .dylib aren't there.

  So my questions are: what I've done wrong? Any idead what else I could try? Even an explanation as to why it does not work would be useful!

  Links:

  #1: http://support.burstly.com/

  #2: http://www.FlashDevelop.org/

  #3: http://get.Adobe.com/air/ / / Sorry, my OS is in french

  #4: http://support.burstly.com/kb/iOS/required-compiler-flags-frameworks

  #5: http://blogs.adobe.com/rajorshi/2011/11/16/ios5-support-for-airusing-external-sdks-to-pack age-apps /

  #6: http://blogs.Adobe.com/airodynamics/2012/05/18/using-platformsdk-for-iOS-on-Windows/

  Hi John,.

  The warning, you can ignore, or add the option to remove it as follows:

  -ios_version_min 5.1 (or whatever the iOS version of minimal support for your app)

  As far as the errors are concerned, they are not related to your library, but DONKEY. Recompile your DONKEY for armv7 only (i.e. Remove armv6 in your settings in XCode), as the AIR takes only supported armv7, as does iOS5.1 +.

  I guess that to recompile your static library and the renovation of the DONKEY with the new .a will solve your problem.

  Neha-

• Aero Flip 3D doesn't work anymore?

  Hello

  My Flip 3D Aero does not work anymore and I have no idea of what is happening... (Windows key + tab (beautiful 3d 'alt - tab'))

  Yes, I have a Windows 7 theme
  Yes find and fix problems with transparency and other effects - can't find any problems.
  Yes my video cards are supported effects. 4850 crossfire

  He worked for couple of months and suddenly... not working anymore... someone has an idea how to fix this?
  Tried searching on the web as a monster of a solution... no luck

  I just found the problem!

  Mark L. Ferguson you me headed in the direction
  I have a G15 keyboard... and you pointed out that my windows key was not working... So I did some research and I've tried a lot of things trying to find out what the problem was... I had on my keyboard, a kind of the joystick button that I can drag to the left or right to set the keyboard in mode 'games' so you can plug in a gamepad/joystick on the back of the keyboard... I just had to turn off this thing! Now his work!

  Thank you Mr Ferguson!

• Game controller will not connect with game

  I bought Microsoft Combat Flight Simulator and a LogiTech gamepad Pro years 3D extreme when I had a Windows XP computer, and they work very well together.  I've since upgraded to a Windows 7 computer.  I updated the driver for the joystick, and the operating system recognizes (when I check the properties, I can move the stick or press buttons and see the answers on the screen).  But I can't get the game to respond to the gamepad.  Any ideas?    When I click on settings on the game homepage screen, a box pops up saying "your joystick device has changed"non typeable characters"to"various non typeable characters".»  You want to reset the control assignments? (recommended) "the characters change every time I do this.  I tried answer Yes and then after a few tries I answered no.  Same results, the joystick is not in the game anyway.  I looked in the CombatFS.cfg file and found similar characters in the section of the controller (LastJoystickName = 'non typeable characters') thank you, John

  Hi John,.

  Thanks for coming back.

  Sorry to see that the problem still persists.

  The Logitech Extreme 3D Pro joystick on game controller is compatible with Windows 7.

  Logitech Extreme 3D Pro joystick Game Controller compatibility with Windows 7

  You can check the Logitech Support and try to download the latest version of the software for the game controller.

  http://www.Logitech.com/en-in/support/extreme-3D-Pro?CRID=411&OSID=14&bit=32

  This can also occur due to some incorrect settings in the game.

  If the problem persists, you can also get in touch with Flight Simulator Support for assistance.

  Flight Simulator support

  Hope the helps of information.

  If you need assistance to resolve any issue related Windows, please post your request and we will be happy to help you.