Double NIC on the host, double network, how to connect to a specific card?

Similar Questions

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  Mr President

  If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  My two fields are FLOW AND DR_NAME

  FLOW = ACCT_ID

  DR_NAME = ACCT_NAME

  I created with success of LOV for these fields.

  First LOV gives acct_id in the debit field and second LOV gives the value of acct_name to dr_name.

  How can I report these lov, it's that when I change my acct_id then acct_name also change

  I have these two tables

  CREATE TABLE "NOM"  (
    "ACCT_ID" VARCHAR2(7) NOT NULL ENABLE, 
    "ACCT_NAME" VARCHAR2(50) NOT NULL ENABLE, 
    "O_BAL" NUMBER(13,2),
    CONSTRAINT NOM_PK PRIMARY KEY ("ACCT_ID")ENABLE
     
     );
  CREATE TABLE "VOUCHERDET" (
    "V_ID" VARCHAR2(9) NOT NULL ENABLE,
    "LINEITEM" NUMBER ,
    "DEBIT" VARCHAR2(7) , 
    "DR_NAME" VARCHAR2(50), 
    "CREDIT" VARCHAR2(7) , 
    "CR_NAME" VARCHAR2(50), 
    "PARTICULARS" VARCHAR2(100), 
    "AMOUNT" NUMBER(21,2),
  CONSTRAINT VOUCHERDET_PK PRIMARY KEY ("V_ID","LINEITEM")ENABLE, 
  CONSTRAINT PUR_SAL_LINE_POD_FK FOREIGN KEY(PROD_ID)
    REFERENCES PRODUCTS (PROD_ID)ENABLE,  
  CONSTRAINT VOUCHERDET_DEBIT_FK FOREIGN KEY ("DEBIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE, 
  CONSTRAINT VOUCHERDET_CREDIT_FK FOREIGN KEY ("CREDIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE,  
  CONSTRAINT VOUCHERDET_V_FK FOREIGN KEY ("V_ID")
     REFERENCES "VOUCHER" ("V_ID") ON DELETE CASCADE ENABLE
    );
  
  

  Concerning

  so, instead of this second ActId, choose ACCT_NAME:

  

• Why the host computer is unable to connect to the smart camera on the network?

  My smart camera of NOR-1772 was connected to our network and functioning as a target to a host computer.  The two are running VBAI 2011.  The camera has been moved to another location on the network and another computer is used as the host? The host is connected to the wireless network.  The camera works fine when connected directly to the back of the computer.  Thank you.

  Hi Joel,

  Yes, it makes sense.  I noticed a corellation when I am set up and where I lose the connection.

  Thank you.

  Rob

• The host only network

  Hello

  I have 3 networks 'hosting only' configured as follows:

  VMnet1 192.168.102.0 255.255.255.0

  VMnet7 192.168.107.0 255.255.255.0

  VMnet9 192.168.109.0 255.255.255.0

  My problem is machines on these networks cannot communicate with each other. After looking through the FAQ, I have all "hosted only" networks were able to communicate with each other. Is there a configuration more what can I do to make this work?

  Sorry for asking such a stupid question, I'm pretty new to VM.

  Kind regards

  Thomas

  These three networks is isolated from each other. You can place all the VMs that need to communicate in one of the networks of the host only. If you need to communicate through two networks, you can use two network adapters, which are connected to each specific network or use on virtual machine as a gateway to the other.

  -

• Impossible to create a network/how to connect to openstack-client CLI

  Hello

  According to the video 'VMware integrated OpenStack - adding networks - YouTube', it shows how to create a network through CLI openstack-client.

  While, I'm new to openstack and don't know how to connect to the CLI client at all.

  I could only try to create a network in the GUI. Here is my configuration:

  

  It looks great, isn't it? However, I get:

  

  Configure anything wrongly? BTW, can someone tell me how to access the CLI openstack-client as the video.

  Here is something you can try.

  If you are using DVS based network, you must enter "dvs" in the section "physical network.

  If you are using NSXV, then you can leave the Network Physics field empty, otherwise you must ensure that you enter a valid dvs moref id.

  For most cases, if you use NSXV, you can simply create network tenent in the project view (then NSXV will take care of it for you).

  Anyway, if you want to use cli, here are the steps.

  1 > connect to the administration server

  2 > ssh-i /home/viouser/.ssh/id_rsa viouser@controller01

  3 > sudo knew.

  4 > source cloudadmin.rc

  Then, you can use the cli freelly.

  Kind regards

  Yixing.

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• Windows xp and the problem of network 7 printer connectivity

  a computer running Windows XP Connect to Dell 2335dn printer using the http: and is connected properly.  Second computer running Windows 7 by using the same Http info cannot connect to the gateway is 192.168.1.101 printer is 192.168.1.110 than the path of the computer network xp is http://192.168.1.110:631 so my real question is what I have to change the 631 to another number for the computer to windows 7 to connect?

  Hello

  1. you have any security program installed on the Windows 7 machine?

  2. were you able to access the printer prior to this problem?

  3. do you receive any error messages?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you run the printer Troubleshooter and check if it helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Sharing files and printers with different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

  Method 3:

  I also suggest to ping the IP address of the printer from a Windows 7 Administrator command prompt and let us know the result.

  a. Click Start and type cmd in the Search box.

  b. right click on cmd in the list programs, and then click run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. at the command prompt, type the command, and then press ENTER:

  See also;

  Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Hope this helps and keep us posted.

• Windows XP cannot connect to DSL Wireless Modem - locked mode "Acquiring Network Address", never connects. Broadcom wireless card

  I have a HP ZV5000 laptop, who has recently suffered a hard drive crash. I replaced the drive reinstalled the operating system and it is running Windows XP Home Professional with Service Pack 3 installed.

  When you attempt to connect to a wireless network, it finds all those that are generally available, but won't connect.

  The properties indicates that the laptop uses "Broadcom 802. "11b / g WLAN. (Broadcom website isn't much help. The site seems to be mostly press releases).

  I am told that it worked (I can't confirm this, as the player crashed when I got it).

  Any suggestions? If there is any other information necessary to solve this, please let me know and I'll be more than happy to provide.

  Thanks in advance!

  How do you reinstall Windows?

  If you use a Microsoft Windows XP installation CD, you must install all of the drivers as well.  If you have reinstalled using any method HP supplies to 'restore factory State' you will have already installed the drivers.

  If you can get to the Internet by connecting to the laptop using an Ethernet cable, you can go HERE and click the button "Scan Now" to make sure that you have all the correct drivers.

  However, because you can see the available wireless networks, it seems that you have at least a certain driver installed for your wireless network card.

  The usual reason that a wireless adapter cannot acquire a network address is the router's security settings are not allowing the connection.

  The best way to deal with misconfigured security settings is to remove the 'profile' currently registered and try to connect again.

  Open network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your wireless adapter and select Properties
  Click the Wireless Networks (see screenshot)
  If the "Use Windows to configure my wireless network" box is NOT checked, you use a third-party utility to configure the adapter and need to read its User Guide to determine how to remove the 'profile' to connect to your router.
  Assuming that the box is checked, find SSID (network name) router in the list of "Preferred networks" and click 'delete '.
  OK your way out
  Find your network in the list of available networks, and then click 'connect '. Make sure you enter the password correctly.

  If this does not work, the next step would be to connect to the router by an Ethernet cable, temporarily remove all security settings that are configured on the router, remove the "My network places" configuration as above and try to connect again.

  If you need help to get to and the configuration of the router, please provide the make, model and hardware version, as appropriate (check the label).

• ESXi 4.1 - the host machine network cards double - possible to separate different networks?

  New ESXi 4.1 install on the server. Server a (2) network adapters.

  I have the set IP address statically vmnic0 for 1 network. Would put vmnic1 for 2nd network.

  Seeks essentially to:

  vmnic0 - 192.168.1.x

  VMS - 192.168.1.x

  vmnic1 - 192.168.2.x

  VMS - 192.168.2.x

  For any help or suggestion would be appreciated!

  Thank you

  You have 2 exchanges in different subnets, it is assumed that for some reason. Depending on your router and physical switches, you may be able to use virtual LANs to connect/isolate the two. It is also possible to use a virtual machine router that connects and routes between the two subnets. There are several routers of Virtual Machine in VMware devices downloads.

  Forum upgrade notice - we will be upgrading systems VMware communities between December 10-12, 2010. During this time, the system will be placed in READ ONLY mode.

• The host only network on ESXi 4.1

  My apologies if there is appropriate documentation on this point, but I was not able to find it.

  I would use a few guests with access to the network only "host-only', but have not found how to set up the images for this.

  Any help is appreciated.

  It is actually easy to achieve. Simply create a new vSwitch without attaching of uplinks (vmnic) to him.

  André

• Adding a virtual (server) computer in 10.142.0.0 go to 172.16.0.0 without additional NIC in the host? NAT?

  Hi guys

  I would like to add a (virtual server) in my current configuration - which is 4 host configured

  All virtual servers are on the 172.16.0.0 network - what is called network ROH

  I got another server in 10.142.0.0 between what is in the VLAN different.

  Is there any way I could have this server in 172.16.0.0 network so that I don't have to add additional network card and assign it to the Vswitch.

  I'm not a network expertise so is there a way it could be done? Using NAT / any other installation program?

  Please advice I will be really grateful.

  Thank you

  Rucky

  Before going into the configuration, can you please let me know your model of switch? Is - this switch L2 or L3? According to your requirment, we have L3 switch to talk of separate VLANs.

  Thank you

  Shan

• I have to use the Microsoft Broadband Networking Utility to connect via wifi to an access point?

  We have a gateway 2wire residential and three computers using here XP or Win7, and I used to have a laptop Vista Home Premium as well.  All of these computers are connected to a shared internet connection using what, in my view, is called zero wireless.  You simply search for networks, enter the ssid, key and good to go.  Until today when I installed a wifi adapter for Dell desktop of my granddaughter has never given the above utility.  His house has a gateway 2wire residential even than mine.  Well, this utility kept popping up and telling me there is no connection and it drives me crazy, because there was a link.  What I have to do is click on START, click on connect to and I can see the front door, and it connects fine.  In fact, I set up my daughter portable Vista, as well as my own Dell laptop and my iPad, and none of them wanted that darn utility.  My granddaughter's computer was purchased in 2007 and was never updated.  Today, I downloaded the SP1 for Vista, but wonder what I have to uninstall this utility (if indeed it is well to do) before you install SP1 and then SP2 go?

  I want to clarify that there is no sharing of files between two computers in this household. Granddaughter uses his for school work, projects etc and daughter uses his to work, takes with her to work.  For now, there is not even a printer and it not there to no interest in the media streaming, sharing etc..  Just the old e-mail, tasks of office etc.

  Thanks in advance for the help.  My first time here, I usually am the person who gives the answers LOL but it's Vista, and you know how it is.

  Hello ccsgo,

  You don't need extra software installed for your wireless connection to work.
  If you are worried about it, you can clean boot of your computer to disable the software to start and then if everything still works, you can uninstall it:
  http://support.Microsoft.com/kb/331796

• What is the PIN Vsup and how to connect to the bottom of basket NI 9932?

  I use the NI 9474 with background basket NI 9932 connector with that he came. I have skills EA of a rock, so I apologize for these basic questions:

  What is the PIN Vsup, and that means the "sup?"

  I'm trying to connect the LED to the NI 9474 (I know there are some on the module already;) I would like to try some store bought). Does anyone know how can I go about it?

  Thanks in advance.

  The 9474 requires an external 5-30 volts continuous. It's what connects to Vsup. The "sup" stands for "supply".

  • NI 9472/74 operating instructions and specifications

• The Windows 7 network computers lose connection to all printers

  Printers are on a Windows 2003 cluster server.  I installed several Windows 7 workstations.  Workstation will lose the connection to network printers. When you try to print that they receive "Windows cannont print due to a problem with the installation of the current printer.  The user can re-boot, then print.  Sometimes it takes several reboots, or if the administrator connects and disconnects and allows the connection of the user (power user rights), then it will work. I tried to update the drivers of the printer on the network. Help!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner