I am not able to connect to the main wifi network but can connect to the network of comments.

Hello

This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

Advertisement

The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

Wait a minute

Turn on the modem first and leave a few minutes, he managed by itself

Turn on the next device that is connected to a modem and leaves turn a good minute

Keep turn on devices one by one at a time, one minute apart, until the entire network is back

Recheck the network and report on your results

Tags: Wireless

Similar Questions

  • I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    only title bar opens and nothing else... Please help

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Also check the cookie exceptions.

  • 2000-2314TU HP: not able to connect to the LAN and Wireless network

    Hello

    I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

    You are the very welcome.

  • Not able to connect to the server with modem 56 k

    I try to connect my Tecra via modem 56 k Internet.
    Also, I tried with another computer laptop with the same details and that worked.
    But when I try it on my Tecra I get an error that is not able to connect to the server.

    So I think that it is a parameter that is not defined correctly for the modem.
    (If you compare it to another laptop all parameters are the same as windows).

    Thanks in advance,

    Theo

    Hello Theo

    Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

    After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

  • not able to connect to the game of google on mobile data store

    I bought gold x 2 lenovo 32 GB vibe.

    in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

    Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

    and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

    Please give the solution.


  • Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

    Original title: Win32/Sirefef.DAtrojan

    Recently, I got the following virus. Win32/Sirefef.DAtrojan

    I was not able to connect to the internet since then.
    Y at - there someone who can help me with the connection to the internet?
    I have a Dell XPS600
    Microsoft XP Professional

    Hello

     
    1. what happens when you try to connect to the internet?
    2 - is confined to the browser Internet Explorer problem?
     
     
    I suggest you perform a full scan of the system.
    Here is a link that will give you know how
     
     
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  • not able to connect a printer shared in task force gives the access error is to deny cannot coonect

    not able to connect a printer shared in task force gives the access error is to deny cannot coonect

    Hello

    1. don't you make changes on the computer before this problem?
    2. What is the brand and model of the printer?
    3. What is the full and exact error message?
    4. have you set a password to the shared printer?

    Please answer these questions and provide us with more information. This could help us help you better.

    See the articles that may be useful.
    "Access denied" error message when you print to a network printer, or view the properties of the printer
    http://support.Microsoft.com/kb/307053
    Cannot use network printer if your password is not saved
    http://support.Microsoft.com/kb/312055

  • Im not able to connect to the internet?

    Im not able to connect to the internet and the message that reeds "the instruction at"0x00bb707c"referenced memory at 0x1ab4a07 memory could not writen

    Hello

    1. don't you make changes to your computer before the problem?

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    Test the issue in safe mode with network.

    Step 2:

    If it works fine in safe mode with network, turn on your computer in a clean boot State and check if the problem persists.

    Note: Don't forget to restart your computer as usual.

  • not being is not able to connect it says unable to load the user profile

    not being not able to connect it said could not load user profile and then the computer automatically disconnects me trying

    ·                         Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    See you soon.

    Mick Murphy - Microsoft partner

  • Not able to connect to the internet via blackberry Simulator

    Hello! I use Windows7 32 bit and Blackberry Java plug-in for Eclipse version 1.5.0 and part net.rim.ejde.componentpack7.0.0_7.0.0.33 package. I am not able to connect to any external URL browser Simulator. Whenever I try to hit any URL, I get an error "could not find the server asked.

    When I start the MDS Server, I get the following log:

    02/12/27 20:00:32.106 IST >: [0]:::
    02/12/27 20:00:32.117 IST >: [1]:::
    02/12/27 20:00:32.184 IST >: [2]:::
    02/12/27 20:00:32.251 IST >: [3]:::
    Thai, IBM00858, IBM01140, IBM01141, IBM01142, IBM01143, IBM01144, IBM01145, IBM01146, IBM01147, IBM01148, IBM01149, IBM037, IBM1026, IBM1047, IBM273, IBM277, IBM278, IBM280, IB
    4, IBM285, IBM297, IBM420, IBM424, IBM437, IBM500, IBM775, IBM850, IBM852, IBM855, IBM857, IBM860, IBM861, IBM862, IBM863, IBM864, IBM865, IBM866, IBM868, IBM869, IBM870, IBM871, I
    18,ISO-2022-CN,ISO-2022-JP,ISO-2022-JP-2,ISO-2022-KR,ISO-8859-1,ISO-8859-13,ISO-8859-15,ISO-8859-2,ISO-8859-3,ISO-8859-4,ISO-8859-5,ISO-8859-6,ISO-8859-7,ISO
    59-8,ISO-8859-9,JIS_X0201,JIS_X0212-1990,KOI8-R,KOI8-U,Shift_JIS,tis-620,US-ASCII,UTF-16,UTF-16BE,UTF-16LE,UTF-32,UTF-32BE,UTF-32LE,UTF-8,Windows-1250,window
    251,Windows-1252,Windows-1253,Windows-1254,Windows-1255,Windows-1256,Windows-1257,Windows-1258,Windows-31J,x-Big5-HKSCS-2001,x-Big5-Solaris,x-EUC-JP-Linux,x-
    -TW,x-eucJP-Open,x-IBM1006,x-IBM1025,x-IBM1046,x-IBM1097,x-IBM1098,x-IBM1112,x-IBM1122,x-IBM1123,x-IBM1124,x-IBM1364,x-IBM1381,x-IBM1383,x-IBM33722,x-IBM737,
    BM833,x-IBM834,x-IBM856,x-IBM874,x-IBM875,x-IBM921,x-IBM922,x-IBM930,x-IBM933,x-IBM935,x-IBM937,x-IBM939,x-IBM942,x-IBM942C,x-IBM943,x-IBM943C,x-IBM948,x-IBM
    x-IBM949C,x-IBM950,x-IBM964,x-IBM970,x-ISCII91,x-ISO-2022-CN-CNS,x-ISO-2022-CN-GB,x-iso-8859-11,x-JIS0208,x-JISAutoDetect,x-Johab,x-MacArabic,x-MacCentralEu
    e,x-MacCroatian,x-MacCyrillic,x-MacDingbat,x-MacGreek,x-MacHebrew,x-MacIceland,x-MACROMAN,x-MacRomania,x-MacSymbol,x-MacThai,x-MacTurkish,x-MacUkraine,x-MS93
    213,x-MS950-HKSCS,x-MS950-HKSCS-XP,x-MSWIN-936,x-pck,x-SJIS_0213,x-UTF-16LE-BOM,X-UTF-32BE-BOM,X-UTF-32LE-BOM,x-Windows-50220,x-Windows-50221,x-Windows-874,x
    ndows-949,x-Windows-950,x-Windows-ISO2022JP >
    02/12/27 20:00:32.254 IST >: [4]:::
    02/12/27 20:00:32.255 IST >: [5]:::
    02/12/27 20:00:32.255 IST >: [6]:::
    02/12/27 20:00:32.268 IST >: [7]:::
    02/12/27 20:00:32.269 IST >: [8]:::
    02/12/27 20:00:32.269 IST >: [9]:::
    02/12/27 20:00:32.269 IST >: [10]:::
    02/12/27 20:00:32.269 IST >: [11]:::
    02/12/27 20:00:32.270 IST >: [12]:::
    02/12/27 20:00:32.270 IST >: [13]:::
    02/12/27 20:00:32.270 IST >: [14]:::
    02/12/27 20:00:32.289 IST >: [15]:::
    02/12/27 20:00:32.290 IST >: [16]:::
    02/12/27 20:00:32.325 IST >: [17]:::
    02/12/27 20:00:32.329 IST >: [18]:::
    02/12/27 20:00:32.338 IST >: [19]:::
    02/12/27 20:00:32.338 IST >: [20]:::

    02/12/27 20:00:32.338 IST >: [21]:::
    02/12/27 20:00:32.339 IST >: [22]:::

    02/12/27 20:00:32.341 IST >: [23]:::
    02/12/27 20:00:32.342 IST >: [24]:::
    02/12/27 20:00:32.345 IST >: [25]:::
    02/12/27 20:00:32.346 IST >: [26]:::
    02/12/27 20:00:32.346 IST >: [28]:::
    02/12/27 20:00:32.346 IST >: [29]:::
    02/12/27 20:00:32.347 IST >: [30]:::
    02/12/27 20:00:32.346 IST >: [27]:::
    02/12/27 20:00:32.353 IST >: [31]:::
    02/12/27 20:00:32.356 IST >: [32]:::
    02/12/27 20:00:32.356 IST >: [33]:::
    02/12/27 20:00:32.356 IST >: [34]:::
    27, 2012 20:00:32 org.apache.catalina.startup.Embedded start
    O: boot tomcat server
    02/12/27 20:00:32.792 IST >: [35]:::
    02/12/27 20:00:32.796 IST >: [36]:::
    02/12/27 20:00:32.817 IST >: [37]:::
    02/12/27 20:00:32.820 IST >: [38]:::
    02/12/27 20:00:32.827 IST >: [39]:::
    02/12/27 20:00:32.828 IST >: [45]:::
    02/12/27 20:00:32.828 IST >: [44]:::
    02/12/27 20:00:32.828 IST >: [43]:::
    02/12/27 20:00:32.828 IST >: [42]:::
    02/12/27 20:00:32.828 IST >: [41]:::
    02/12/27 20:00:32.827 IST >: [40]:::
    02/12/27 20:00:32.830 IST >: [48]:::
    02/12/27 20:00:32.832 IST >: [49]:::
    02/12/27 20:00:32.832 IST >: [50]:::
    02/12/27 20:00:32.832 IST >: [51]:::
    02/12/27 20:00:32.829 IST >: [47]:::
    02/12/27 20:00:32.829 IST >: [46]:::
    27, 2012 20:00:32 org.apache.catalina.core.StandardEngine start
    O: Servlet engine starting: Apache Tomcat/6.0.28

    02/12/27 20:00:32.932 IST >: [52]:::
    02/12/27 20:00:32.932 IST >: [53]:::
    02/12/27 20:00:32.944 IST >: [54]:::
    02/12/27 20:00:32.944 IST >: [55]:::
    27, 2012 20:00:33 org.apache.catalina.startup.ContextConfig defaultWebConfig
    O: no default web.xml file
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: AdministrationController (status): init
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: AdministrationController (statistics): init

    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: AdministrationController (Proxy Mappings): init
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: AdministrationController (AccessControl): init
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: AdministrationController (Configuration): init
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: AdministrationController (Device Mappings): init
    Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
    O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
    27, 2012 20:00:33 org.apache.catalina.startup.ContextConfig defaultWebConfig
    O: no default web.xml file
    27, 2012 20:00:33 org.apache.tomcat.util.net.NioSelectorPool getSharedSelector
    O: using a switch shared for read/write to servlet
    27, 2012 20:00:33 org.apache.coyote.http11.Http11NioProtocol init
    O: initializing Coyote HTTP/1.1 on http-8081
    27, 2012 20:00:33 org.apache.coyote.http11.Http11NioProtocol start
    O: starting Coyote HTTP/1.1 on http-8081
    02/12/27 20:00:33.671 IST >: [56]:::
    02/12/27 20:00:37.169 IST >: [57]:::
    02/12/27 20:00:37.169 IST >: [58]:::

    Any help would be appreciated.

    Thanks in advance

    Mayank Garg

    Auntie Consultancy Services

    You will also need to enter the login and the password for your proxy server in the file rimpublic.property.

  • Not able to connect to the server via the AFN TCP

    Hi all

    After Googling carefully I finally decided to post my problem which is really sent me nightmares.

    In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

    URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

    I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

    In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

    When I try to connect via wifi network using the suite of string

    URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

    I am able to connect to the server, but not in the case via the AFN.

    Please help me...

    I'm here just stuck and not finding a way out.

    Thank you

    Finally I found the solution to the problem...

    I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

    'socket://127.0.0.1:8089 '.

    No need to specify the APN, user name, and password.

    Here's the code used

                     ConnectionFactory connFact = new ConnectionFactory();
                      ConnectionDescriptor connDesc;
                      connDesc = connFact.getConnection("socket://127.0.0.1:8087");
    
  • Not able to connect the AIR-tour 1041N-A-K9 using windows 8

    Hello

    I use AIR-TOUR 1041N-A-K9 wireless Accesspoint it was controlled using the command Air-CT2504-k9 wireless.

    When I tried to connect to the access point using the Windows 8 machine was not able to connect,

    Is there someone who faced the same problem.

    Hello

    There is a known bug with Windows 8 connectivitiy problems with Cisco UWN.

    https://supportforums.Cisco.com/docs/doc-27213

    Can you please try the solution proposed in the document and see if it works?

    HTH,

    Patrick

  • I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

    Connection to the local network - properties dialog box

    Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

    Hello Rajaneer,

    Is the computer that you are using a personal computer or a work computer?
    You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  • Not able to connect to the user account, error: user profile Service has no logon

    I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

    Where and how can I fix it?

    Thank you.

    Larry

    Original title: need help with setting up an account

    Hi Larry,
    Thanks for posting your query in Microsoft Community.

    From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

    This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

    If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

    To resolve the problem with the user account, you can follow these steps:
    Method 1:
    (a) click Start, type regedit in the start search box, and then press ENTER.
    (b) search for, and then expand the following registry subkey:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

    (c) right click the SID that you want to remove, and then click on remove.
    (d) log on to the computer and create a new profile.
    You can also check this link:
    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Method 2: Also, see the steps in the following Microsoft article:

    (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

    If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

    (b) how to back up and restore the registry in Windows
    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    For any Windows help in the future, feel free to contact us and we will be happy to help you.

  • I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

    I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

    Maybe this?

    http://support.Microsoft.com/kb/310049

    Assuming you are using Outlook, which you failed to mention

    Thank you very much, it worked! Yes, I use Outlook, sorry I mentioned not just but good guess. Thank you very much for the help.

Maybe you are looking for