Download application failed

Similar Questions

• Why new 6s my wife keep asking the apple id password once we've entered the password?  I know it's asking to update the downloaded applications under my id.

  My wife and I just upgraded to the 6s.  His phone will not update the downloaded applications under my apple ID and continues to request the password for my apple ID.  We are entering the correct password, but he told us that he failed.  I restarted and disconnected icloud on his phone.  We never had this problem before.  Why her phone does not accept the password of my apple ID.  And Yes, I've confirmed that the password is correct... I had to use it to post this question.

  Thanks for any help.

  Promulgated by this Apple ID on his phone? Have you checked the settings > iTunes and App Store and make sure that the ID is good in there?

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005)

  STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005).  Click OK to close the application.

  Occurs when I try to restart my laptop and ends the boot process.

  03/08/11 I get this same error, and I see that nobody has answered it yet. DPR anyone has any idea other than a new image for this problem?

  Rodolphe/Spyware/Malware infection, blue screens don't have an option to click OK to finish or even forget that you can click on anything. If you do not work in safe mode or even last known good configuration you can try a repair installation, but you can still loose data like that. I would just pull the information you need out of the HDD using a speaker and then wipe and start over from scratch. Don't forget to scan your files if you do not import everything using a speaker. However if you can access the mode safe mode with networking, try to download malware bytes and running (don't know how its spelled) it will remove files such as _is27.exe which is a (Rogue.Installer).

• "The application failed to start because its side-by-side configuration is incorrect."

  original title: Please answer me

  Hello, I just downloaded yahoo Messenger 11. I have windows vista, and the installation went well. Now, whenever I try to start it, I have a Kaspersky Anti-virus program. As you approach the end of the installation of the program, a warning box appears, through a program of protection and on the inside, there are three options, I already tried all that, and then I get this error: the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details.  Any help is appreciated. Thank you, raed - zyd

  You might also have a look at the following thread replied:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/error-the-application-has-failed-to-start-because/df019c0d-746e-42d0-AD68-465e18e3f3ef

• Error message: the application failed to start because its side-by-side configuration is incorrect please view log for details application event

  Original title: cannot open programs

  I get this message when I try to run any program on my windows vista operating system: the application failed to start because its side-by-side configuration is incorrect please view log events applications for more details. I can't open any programs or files associated with programs IE Miicrosoft Office), any help would be sufficient. Please make your suggestions VERY user-friendly. Thanks in advance.

  Hi KenKenJr,

  1. are you faced with questions only when you open Microsoft Office programs?

  This error can occur because of a corrupted Microsoft Visual c++ installation.

  Step 1:

  If this error occurs only when you try to open the Office programs, you can check the following link and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Step 2:

  To resolve this problem, you can also install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• When I opened e-mails. doc or pdf, this message appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  Original title: side-by-side configuration is incorrect

  When I opened, try opening some emails. doc or pdf, this msg appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  I'm going to log events, but how to solve the problem by putting the RIGHT configuration to?

  Thanks in advance

  Hello

  1. when the question is is produced?

  2. you remember of any change to your computer before the problem?

  3. are you using a 32-bit operating system or a 64-bit?

  Please visit: What are the information in the event logs? (Event Viewer)

  In the meantime, follow these steps and check if they help.

  Step 1:

  I suggest you install the Visual C ++ 2005 Sp1 Runtime and check if the problem persists:

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en

  Step 2:

  If this does not resolve the issue, I would have you done SFC scan on your machine to check if the problem is related to missing or corrupted system files.
   
  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

  I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Cannot open applications, error: "the application failed to start because its side-by-side configuration is incorrect...". »

  Original title: cannot open applications

  I am trying to open apps, and it says "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. "I tried to download C++ from an existing thread already, but when I try to run it, I get the same message. I have a x 64 bit system.

  Hi Alex,

  I suggest to uninstall all versions of Microsoft Visual C++ Redistributable installed on your computer and then install the latest version.

  To uninstall refer to the articleUninstall or change a program".

  After uninstalling, download and install "Package redistributable Microsoft Visual C++-2010 (x 64)" from Microsoft Download center.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  Package redistributable Microsoft Visual C++ 2010 (x 64) SP1.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=13523

  Keep us updated on the status of the issue.

• YouCam is not working error the application failed to start because its side-by-side configuration is incorrect.

  It worked initially, but now it does not work

  now every time I try to go on the youcam, a box appers and said

  "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. »

  I need help to solve this problem

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest that you run the SFC scan and check if this solves the problem for you:

  http://support.Microsoft.com/kb/929833

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Method 2: Perform a disk check, follow the steps below:

  1. open the computer by clicking the Start button, click computer.

  2. click on the drive you want to check, and then click Properties.

  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Method 3: Update of the .net Framework.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22

  Method 4: You can also try the steps from the link that addresses a similar issue:

  http://Forum.CyberLink.com/forum/posts/list/10017.page;JSESSIONID=90C05F693894B118A564C99DA1172301#44062

  Check the Event Viewer for related the question paper.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Cannot run Quicken 2010, error message: the application failed to start because its side-by-side configuration is incorrect

  Original title: the application failed to start because its side-by-side configuration is incorrect

  I use Quicken 2010 for a couple of years, and suddenly it stopped working with the error in the subject line. I uninstalled the program completely,
  re-installed and got the same error. (I am running Windows 7 64 bit and help Quicken was not particularly cooperative.) So, at the suggestion of someone, I ran a SxSTrace and got the following report, which I find incomprehensible. If it points me to a solution, maybe someone could help me with it:

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x86)\Quicken\qw.exe
  AssemblyDirectory = C:\Program Files (x 86) \Quicken\
  Application configuration file =
  -----------------
  INFO: Parsing manifest file C:\Program Files (x86)\Quicken\qw.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
  INFO: Reference: Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
  INFO: Resolving reference Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_f480bfaef65491a5.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC90.CRT, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC90.CRT.mui, language = "*", processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.MFC\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.MFC.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.1_none_7dd1e0ebd6590e0b.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Good news! After removing and reinstalling the software appropriate to Visual C++.
  Quicken is again functional and, even better, after all uninstalls and installs the last days, my connection to my Bank to download transactions is still in place.
  Thank you

• Taskbar does not start error "the application failed to start because its side-by-side configuration is incorrect."

  Original title: WINDOWS 8 - ask suddenly won't open at all.

  I have installed on my VAIO, MediaGo and I use it quite frequently, but last week, he refused to open, display the error:

  "The application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. »

  I have, since the application stopped working, used guest to detect and remove the corrupted my computer files using the sfc/scannow command and the dism / /restorehealth/cleanup-image online, but the problem persists.

  I tried to watch the event log AND gave the sxstrace.exe tool a shot, but it is useless, I have no idea what to do. I googled nothing helps...

  I would really like to get the matter sorted quickly, and any help would be welcome!

  Hi Sandra,.

  You can download the latest version of Visual C++ from the following link:

  http://support.Microsoft.com/kb/2019667/en-us

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679

  Please let us know the status of this issue.

• Download CC fails on a new PC with no previous installation

  Download CC fails on a new PC with no previous Setup - run the adobe CC cleaning tool and redownloaded according to the advice of the forum but still fails - error 43 - advice please

  Please follow the steps below:

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: ( If you do not see any folder skip this step )

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE ( App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.