Download El Capitan and Yosemite still shows as operating system after reboot

Similar Questions

• What is the largest hard drive or the RAID supported by El Capitan and Yosemite?

  What is the largest hard drive or the RAID supported by El Capitan and Yosemite?  Also, WHERE can I find this specification?  Drobo claims that 16 TB is the largest external RAID supported and I do not.

  FYI............ 2 UPDATES since I posted this question:

  "1. Drobo has updated their FIRMWARE to allow now to 'beyond' 64 power to RAID".  Thus, their original 16 TB limit has now been replaced by their new limit of 64 to.  Also note that when you use a Drobo, Apple Mac OS does correctly shows space 'Drive' and the 'free space', if the Drobo 16TB exceeds the size; but the Application DashBoard of Drobo displays the correct numbers.  For example, my Drobo 5 d contains 5, 8 TB disks, for a total size beyond 40 to RAID (theoretically, since most of us should know, now, that the ACTUAL SIZE IS SLIGHTLY SMALLER than THE THEORETICAL SIZE).  AVAILABLE FOR USE ACTUAL SIZE IS ONLY 28.9 TB.  Thus, 40-28, 9 = 11.1 TB gets used in place for the PROTECTION of RAID beyond and the difference between REAL SPACE and SPACE THEORY.  It IS NORMAL because any RAID 5 device always uses about 1 size of hard drive for its Protection.  So, knowing this, the DeskTop icon showing 28.9 TB disk space and free space as everything that is not yet used.  However, instead, the Mac OS shows 70,37 TB disk space and free space like 68,37 TB, which are both incorrect.  Although I'd love it if Mac OS has been magically increase my disk space, in fact, these two numbers are false.  Drobo knows this, and Apple has not, in my discussions with both.  So I hope, between the two companies, that this problem can be corrected.

  2. after many hours on the phone with Apple Support, through no less than 6 people including 2 senior advisers, NONE OF THEM COULD ANSWER MY QUESTION ON CE WHO IS MAXIMUM ALLOWED HARD DRIVE or RAID SPACE AUTHORIZED BY Yosemite and El Capitan.  For me, THIS IMPORTANT FACT SHOULD SIMPLY BE LISTED IN THE OS SPECIFICATION TECHNIQUE, it's quick and easy to read on the Support Site.  But Apple is the new bureaucracy, they are, I don't see what is happening any time soon.  So, be aware that, for now, HE IS No. LIMIT ON SIZE, as an Apple adviser said; but could not confirm in writing; and, IT IS AN INCORRECT DISPLAY SIZE AND FREE SPACE, if your drive is greater than an unknown 16 + TB in size.  Note that I have 3 other RAIDs that are properly in place showing that 9 TB, TB 12 and 18 to size; but I do not know how the SIZE IS IMPORTANT to ensure that the operating system display it correctly, except for my Drobo TB 40.  So, the bottom line, somewhere between to 18 and 40 to is where he goes wrong, in its display of sizes.

• I deauthorised all my computers several times and iTunes still shows that I have authorized 5.

  I allowed off all my computers several times and iTunes still shows that I have authorized 5. I can not re - allow one of my computers and cannot allow overall because I did last October. I tried a logout and back logging, remove the SC info folder etc... Any ideas?

  I allowed off all my computers several times and iTunes still shows that I have authorized 5

  Normally, you can only authorized computers off once a year.

• I downloaded El Capitan and can't drag and drop Photos for pictures of Mac to my documents Pages.  Is there a solution?

  I downloaded El Capitan and can't drag and drop Photos for pictures of Mac to my ' 09 Pages documents as I did before with iPhoto.  Is there a solution?

  Hi gr.

  Drag / drop photos to Pages ' 09 seems to be broken. Copy-paste works.

  Select the photo in the Photos. Edition > copy

  Click in the page document. Edition > paste

  Faster:

  Click on the photo

  Command + C

  Click on the pages

  Command + V

  Kind regards

  Barry

  PS: The time to update your profile information.

  El Cap is running on the iBook G4? Problems outside of it?

• I downloaded el Capitan and now my outlook does not work correctly

  I downloaded el Capitan and now my outlook will not work correctly. I'm unable to synchronize and the program crashes

  What version of office do you use?  If Office 2011, you must ensure that you are the 14.5.8 version at least, since 8 fixed the problem of synchronization.  Later seems to be 14.6.0 (update this morning).

• My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  Hello

  Check if the hard disk needs repair.

  Open the disk utility, located app in HD > Applications > utilities

  Select Macintosh HD on the left then click the first aid tab, and then click Run.

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• I tried to download the trial version, and he said that my operating system is no longer has been supported

  I tried to download the trial version, and he said that my operating system was no longer supported

  Hello

  Please see the system requirements: -.

  System requirements | Creative cloud

• I entered my CC number and my monthly payment. When I try to download Photoshop it says 'you are running an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. "After looki

  I entered my CC number and my monthly payment. When I try to download Photoshop it says 'you are running an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. "After watching computer software system preferences is up to date and my google chrome is updated. How can I get photoshop?

  Please check the requirements for Photoshop and see if your system meets the requirements:

  FAQ: What are the system requirements for the desktop creative cloud application and every creative application of Cloud?

  If your system meets the requirements, please see the FAQ for installation instructions:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps

• Is there a way I can use Microsoft Word, Excel, and Powerpoint on an Android operating system?

  Original title: Android OS

  Is there a way I can use Microsoft Word, Excel, and Powerpoint on an Android operating system?

  Hi DavidBuzzer,

  It is not possible to use Microsoft Word, Excel, and Powerpoint in Android operating system.

  However, you can use your favorite search engine & download any third-party software that could serve the purpose.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• Uninstall Windows 7 and return to the previous operating system - Vista

  Victorinox original title: my nephew put windows 7 on toshiba laptop, which had windows vista when I purchesed and there was no disk operations sold with the laptop, how can I get vista windows on here.

  can someone help me, myh computer did not come with all the disks to restore my windows vista or that applications where load on this toshiba satellite a305-56903. DOE anyone know anything I can do to solve this problem.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I am a student with a MacBook Pro, and I need a Windows operating system to run software from the school. I can't afford a new ' puter, so I got to BootCamp Windows 7. Where can I get a copy?

  I am a student with a MacBook Pro, and I need a Windows operating system to run software from the school. I can't afford a new ' puter, so I got to BootCamp Windows 7. Where can I get a copy?

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Microsoft Windows 7 Ultimate - full version

  Full version - Microsoft Windows 7 Professional

  Microsoft Store:

  http://www.microsoftstore.com/store/msstore/list/parentCategoryID.44066700/CategoryID.60521000

  http://www.Microsoft.com/student/en-us/products/Windows/default.aspx

  If you're in College, you can also check your Campus for a greatly reduced copy Bookstore.

• Adobe illustrator app does not download on my ipad air 2 more. Operating system is uptodate. Will not let me delete. Help available?

  Adobe illustrator app does not download on my ipad air 2 more. Operating system is uptodate. Will not let me delete. Help available?

  Hi Trimmertop,

  Have you tried to reboot your iPhone and then retry installing? If you have and which did not work, have you tried a forced restart of the phone?

  Sue.

• How to configure vmware workstation and server Suse 10 as operating system prompted

  Hi, I installed vmware workstation 6.5 on vista and Suse 10 as guest operating system.  I keep Suse as default (without any network configuration).  I modified the default vmware gateway 192.168.2.1 keep even as window by default gateway settings. I also changed to the subnet to 192.168.2.0.  The IP address is replaced by 192.168.2.128. IP address of my Vista is 192.168.2.4 and DNS Server 4.4.4.1 and 4.4.4.2.

  I tried to ping between host and guest, and comments to the host, but still received the error of "destination host unreachable". It does not matter using host only or NAT mode.

  All Documents available? All advice? What do I have to configure Suse network. ?

  Thank you

  Ming

  Mike10 wrote:

  Host:

  Wireless network connection Wireless LAN adapter:

  IPv4 address: 192.168.2.2 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Ethernet VMware Network adapter adapt VMnet1:

  IPv4 address...: 192.168.17.1 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Ethernet VMware Network adapter adapt VMnet8:

  IPv4 address: 192.168.30.1 (Preferred)

  ... Subnet mask: 255.255.255.0.

  For infor comments:

  eth0 Link encap HWaddr 00: 0C: 29:8E:1F:01

  INET addr:192.168.30.128 Bcast:192.168.30.255 mask: 255.255.255.0

  If the IP address of comments has the correct value you use VMnet8, not VMnet1. It should work, but this isn't the network "host-only '. That's what I need the .vmx file for. If this indicates that the virtual NETWORK adapter is configured as 'host-only' the IP of comments is wrong. It must be 192.168.17.x in this case.

  However... try to get a ping of the IP address, not name. Depending on the configuration you have posted, you should try to ping the 192.168.30.1 customer and 192.168.30.128 host. Don't forget that cannot work if your client is configured to use instead of VMnet1 VMnet8. If it is really configured to use VMnet1 you must change the IP of comments that I wrote above.

  If the host and the guest have active firewall disable them for testing purposes.

  Furthermore, by default, VMware installs a DHCP for VMnet1 and VMnet8 service. So if this service is still running on your host computer, you can assign the DHCP client and he gets the appropriate automatically for the network IP address.

  I don't no how to open the *.vmx in text format.  I noticed that vmnet1 IP address on the side of the BACK is 192.168.17.1 but side comments, it is established as 192.168.20.0.

  It is a text file. Just open in an editor and copy and paste it or attach the file to your next post.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• KB2518864 and KB2478658 still showing ready to install even if alread installed

  I managed to install the updates to two topic on my system XP SP3 - journal suggests that all is well.   After rebooting my machine, they still appear as needing to be installed.   I tried to remove the update by using Add/Remove Programs, and then manually download and install the two updates.  WU shows that I need to proceed with the installation.   Is there a necessary tweak to convince WU that the a indeen update was applied, or is there an error in testing WU's efforts.

  After further investigation, it seems that if no files requesting the update are actually placed in the appropriate .NET Framework folder.  I watched all the files that shows the setting day and in all cases, that the file on my system to an earlier version.   Note that, as stated above, the update reports that it has successfully completed, and there is no error in the log file.

  Thank you for your comments.  I followed your suggestions., but without success.  In fact suggestion 3, making installation in safe mode does not work because Microsoft installation Service does not work in safe mode, and the update in question use MSI.

  I finally solved the problem by uninstalling the. NETFramework and then put it back in place and apply all updates to Windows.