Download FTP problems

Similar Questions

• Download of problems, mistakes 1671, 3259

  Download of problems, mistakes 1671, 3259

  Here are some documents from Apple on iPhone download errors in general

  If you see "There was an error downloading your purchased music" when you try to download music from iTunes - Apple supp...

  and

  Solve the problems between iTunes and third-party security software - Apple Support

• Streets & trips 2013 details download installation problems...

  The installation seems to work, but the program may not be running.  Control Panel verifies that the software is installed (1.8 GB) while the installer has not created an S & T normal ICON and the software cannot be loaded even by clicking on the executable file in the program directory files. I have installed/uninstalled the program several times.  Turned off Norton antivirus and firewall and Windows Firewall protection. Restarted again and again. Nothing has worked...

  -Error message: "cannot find a network share or removable device, the DVD is not in the drive or installing this application is damaged.  Make sure that the drive you installed is attached, the DVD is in the drive, your network is connected, or run the installation again from its original installed location. (5-40003-6) ".

  ANYONE KNOW IF THERE IS A FIX FOR THIS PROBLEM YET?

  Hello

  Looks like you've already discovered the streets and travel Forum.

  Streets & trips 2013 details download installation problems:
  http://social.Microsoft.com/forums/en-us/streetsandtrips/thread/a3c90cf2-ab59-4f82-9404-a8cc0a9b9a05

  Concerning

• Full or partial URL in the download FTP area?

  Quick question - in the download FTP in Muse area, which is best practices for the opening of the site url: IE, http://mysite.com or simply to ifrance.com

  Does make a difference?

  Neil.

  Well, they leave out the http:// so I will too!

• Hello, I just purchased Leica, should be free, Lightroom, I try to download there problem to to do. can anyone help.  Dear Leica customer, we are delighted that you are interested in one of our high quality products and are hereby sending you the rede

  I just bought Leica, should be free, Lightroom,

  I try to download there problem to to do.

  can anyone help.

  Dear customer Leica, We are delighted that you are interested in one of our high quality products and are hereby send you the redemption code for the download of the software directly from Adobe. Please enter this code at the following Web site to download your version of Lightroom: Your redemption code: xxxx.xxxx.xxxx.xxx.xxx https://redeem.licenses.Adobe.com/getserial We hope you enjoy our product. Leica Camera AG

  Please check How to download, install and activate Adobe applications

• I would like to know if the new operating system Mac El Capitan will work ok with LR and PS CC 2015.  Download no problem?

  I would like to know if the new operating system Mac El Capitan will work ok with LR and PS CC 2015.  Download no problem?

  Yes, it is compatible. For more information, please see the system requirements | Cloud Creative

  Concerning

  Hervé Khare

• Download via ftp problem

  Hello

  I am trying to download a 'coming soon' page for a customer, riding too one existing site, she (build in Muse). I tried the download with no public_html folder nothing helps. Downloading the files and I don't get any errors, but its existing site is still there. When I asked the designer of the current site for help, she responded with this, and I have no idea where to start!

  "index.html is not visible, because there is a redirect in .htaccess to container.php in your FTP program, you need to enable the visibility of hidden files."

  Does that mean something to someone?

  FYI: when downloading via ftp to my server on Bluehost (for other clients) I have no problem.

  Thank you!

  I'm no expert here, but I suggest to go through this .htaccess tutorial info just in case you are hesitant to ask your colleague for more precision.

• Access and download FTP on VPN problem

  Ok

  Here's my situation, we connect to Cisco ASA 5505 on IPSEC VPN cisco forwards the request to our router Juniper.  What we do on the VPN works exept FTP #1

  Here I am the Cisco config (with personal information removed).

  problem in society is the IP addressing as been IMO butched

  We have 6 guests

  1.0

  2.0

  3.0

  4.0

  5.0

  6.0

  Since most routers use 0,0 1,0 or 2,0 most of our clients cannot connect to the VPN, then my boss set up our Juniper to translate the IP address

  So make us 202,0 access 2.0

  Example if to access a server in 192.168.2.220 in RDP that write us in windows RDP 192.168.202.220 and converts of Juniper data 2,220 and everything works fine

  EXCEPT FTP.

  The FTP server is 192.168.2.19

  So if I write in IE or Firefox (ps file zilla does not work)

  FTP://192.168.2.19  I get the list of files. but when I click on a folder or file, I get a time-out error.

  so that if I do ftp://192.168.202.19 I don't even no initial registration.

  If I look in the Juniper I can see data entry

  So the problem seems to be coming back from the Juniper or cisco.

  The FTP server is also part 3, so when I called the company to see if it is active or passive.  They said that it is both.

  I guess that the problem comes from the Juniper but still take a chance

  ASA Version 8.2 (1)
  !
  Terminal width 250
  router host name
  activate the encrypted password
  encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.192.2 255.255.255.252
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP x.x.x.x 255.255.255.248
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  grp_outside_in tcp service object-group
  Description Ports require for internal transfer
  EQ smtp port object
  EQ port ssh object
  access list inside-out extended ip allowed any one
  access list inside-out extended permit icmp any one
  permit no_nat to access extended list ip 192.168.0.0 255.255.0.0 10.250.128.0 255.255.255.0
  list access tunnel extended split ip 192.168.0.0 255.255.0.0 allow 10.250.128.0 255.255.255.0
  access-list 101 extended allow ip 10.250.128.0 255.255.255.0 192.168.201.0 255.255.255.0
  access-list 101 extended allow ip 10.250.128.0 255.255.255.0 host 192.168.202.19
  access-list 102 extended allow ip 10.250.128.0 255.255.255.0 192.168.202.0 255.255.255.0
  access-list 102 extended allow ip 10.250.128.0 255.255.255.0 192.168.2.0 255.255.255.0
  access-list 103 extended allow ip 10.250.128.0 255.255.255.0 host 192.168.202.19
  access-list 103 extended allow ip 10.250.128.0 255.255.255.0 192.168.203.0 255.255.255.0
  104 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.204.0 255.255.255.0
  104 extended access-list allow ip 10.250.128.0 255.255.255.0 host 192.168.202.19
  105 extended access-list allow ip 10.250.128.0 255.255.255.0 host 192.168.202.19
  105 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.205.0 255.255.255.0
  106 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.206.0 255.255.255.0
  106 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.202.0 255.255.255.0
  114 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.214.0 255.255.255.0
  114 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.201.0 255.255.255.0
  114 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.202.0 255.255.255.0
  114 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.203.0 255.255.255.0
  114 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.204.0 255.255.255.0
  114 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.205.0 255.255.255.0
  114 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.206.0 255.255.255.0
  access-list 200 scopes allow ip 10.250.128.0 255.255.255.0 192.168.203.0 255.255.255.0
  access-list 200 scopes allow ip 10.250.128.0 255.255.255.0 192.168.204.0 255.255.255.0
  access-list 200 scopes allow ip 10.250.128.0 255.255.255.0 192.168.205.0 255.255.255.0
  access-list 200 scope allow ip 10.250.128.0 255.255.255.0 host 192.168.202.19
  400 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.201.0 255.255.255.0
  400 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.202.0 255.255.255.0
  400 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.203.0 255.255.255.0
  400 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.204.0 255.255.255.0
  400 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.205.0 255.255.255.0
  400 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.206.0 255.255.255.0
  400 extended access-list allow ip 10.250.128.0 255.255.255.0 192.168.214.0 255.255.255.0
  access-list 201 extended allow ip 10.250.128.0 255.255.255.0 192.168.201.0 255.255.255.0
  access-list 201 extended allow ip 10.250.128.0 255.255.255.0 192.168.202.0 255.255.255.0
  access-list 201 extended allow ip 10.250.128.0 255.255.255.0 192.168.206.0 255.255.255.0
  extended access-list of 500 permit tcp 10.250.128.0 255.255.255.0 192.168.202.0 255.255.255.0 eq ftp
  extended access-list of 500 permit tcp 10.250.128.0 255.255.255.0 192.168.202.0 255.255.255.0 eq ftp - data
  extended access-list of 500 permit tcp 10.250.128.0 255.255.255.0 192.168.202.0 255.255.255.0 gt 1024

  pager lines 34
  Enable logging
  timestamp of the record
  debug logging in buffered memory
  recording of debug trap
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool mobilepool 10.250.128.100 - 10.250.128.130 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 621.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access no_nat
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
  Route inside 192.168.2.0 255.255.255.0 192.168.192.1 1
  Route inside 192.168.201.0 255.255.255.0 192.168.192.1 1
  Route inside 192.168.202.0 255.255.255.0 192.168.192.1 1
  Route inside 192.168.203.0 255.255.255.0 192.168.192.1 1
  Route inside 192.168.204.0 255.255.255.0 192.168.192.1 1
  Route inside 192.168.205.0 255.255.255.0 192.168.192.1 1
  Route inside 192.168.206.0 255.255.255.0 192.168.192.1 1
  Route inside 192.168.214.0 255.255.255.0 192.168.192.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 192.168.2.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac floating
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dyn1 1 set transform-set floating
  Crypto-map dynamic dyn1 1jeu reverse-road
  mobilemap 1 card crypto ipsec-isakmp dynamic dyn1
  mobilemap interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 192.168.2.0 255.255.255.0 inside
  SSH 192.168.192.0 255.255.224.0 inside
  SSH 10.0.128.0 255.255.255.0 inside
  SSH timeout 5
  SSH version 2
  Console timeout 0
  dhcpd outside auto_config
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal mobilegroup group policy
  internal mobile_policy group policy
  attributes of the strategy of group mobile_policy
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel

  (User with the access restrictions section list)

  type tunnel-group mobilegroup remote access
  tunnel-group mobilegroup General-attributes
  address mobilepool pool
  Group Policy - by default-mobile_policy
  mobilegroup group of tunnel ipsec-attributes
  pre-shared key
  !
  Global class-card class
  match default-inspection-traffic
  inspection of the class-map
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:4d936450878b9803a1fdde1c7f0fd807
  : end

  I saw Application Layer Gateway (ALG of Juniper) give a problem with the FTP flow. Check to see if it is activated and flip on (or off) and try again your ftp.

  ScreenOS 6 + (Netscreen firewall), the command is 'get alg '. For ScreenOS 5.4 or lower is a hidden command ' get the registry nat vector | I FTP ".

  For the Juno (SRX Firewall) is to "see the alg decision."

• FTP problems with the linux ftp server

  Hello

  I have a problem when trying to get a file via FTP. The FTP server is an embedded linux system, get the file manually via FTP is no problem, but to TestStand, I get the following error:

  Cannot download the file ' / opt/log/sislog.log'.
  Check if the local and remote path exists and is read and write respectively.

  The system does not have the specified path.

  error. I know that the file is there, the permissions are given. So I tried the other way around and tried to download a file called "mysislog.log" in that directory and download it again. I get the same error, but when I telnet to the LUX machine, I see that there is a file in this directory, but the file is called "\mysislog.log" - so I think backslash TestStand put the last bar in the name of the file and therefore impossible to load the file.

  Here is the list of the repertoire of the LUX machine:

  root@FCM2001-A2-03-37-4A: / mnt/exponent0/opt/log > he's
  -rw - r - 1 root root 0 16 Apr 08:51 \mysislog.log
  -rw - r - r - 1 root root 111219 16 Apr 08:41 syslog_0.log
  -rw - r - r - 1 root root 262096 Apr 13 11:52 syslog_1.log
  -rw - r - r - 1 root root 35503 Apr 13 11:53 syslog_error_0.log

  Any ideas?

  Hello

  Unfortunately, this is a known issue that will be fixed in a future version of TestStand (although I don't know what future version). The FTP step was designed for LabVIEW RT.

  The workaround is to call a code module that runs this ftp upload, possibly using a ftp software.

  See you soon,.

  Cheggers

• Download FTP file number

  Hi everyone-

  I am trying to download information in a folder but Muse said that the folder does not exist. I double checked and it's there.

  I have no problem with hosting ftp loading original references to ftp but it seems that with a created FTP I can not.

  Is this a known issue?

  Not sure if there is a similar problem, but just in case it helps folder does not appear to point to the site

• Download FTP - ERROR 503

  I try to download on my FTP site, and I get this error - error: could not generate code to activate one or several web fonts on the 'HOME' page [Error 503] - what is happening and how to fix it?

  I had the same problem yesterday - if you leave Muse and sign of creative cloud, and then connect again to restart Muse which seems to fade.

  See you soon

  Stuart

• FTP problems

  now, I had a problem at least 3 times, and perhaps more, but I have lost track.

  If your ftp upload is interrupted for some reason any system by default apparently to reload the complete site without warning.

  I hesitate to interrupt the download for fear of more problems, but as my site has grown bigger has become a serious issue.

  I have a site with thousands of high quality images.

  the system has now been download the site during six and a half hours no end in site.

  Let me say that again in SIX AND a HALF.

  nearly 700 web pages and 3500 images.

  the changes of origin were about four pages of web and download two or three minutes.

  so, I've now lost a day full because the ftp service has no ability to function properly.

  is there a workaround when this happens?

  and before ADOBE application that I can't send you my file it is near 400 meg.

  I'm a bit late to this discussion. First of all, thank you for providing the context about your file and workflow. It is always useful to understand the impact of different decisions in terms of real-world workflow.

  The code is currently being implemented as you describe. If a download fails after you change some of the files on the server, then the next download will download all the files.

  During the Muse download generates a file named muse_manifest.xml. This file contains a list of all the files on the site as well as a "fingerprint" for each file. When a new download is made Muse grabs the file muse_manifest.xml on the server and checks the fingerprint for each newly created file against what is in the manifest file to determine whether or not the new file should be downloaded. If any file must be changed, then the existing muse_manifest.xml is removed from the server. Once the download is complete the last file which is downloaded/written is the new muse_manifest.xml.

  Although we are talking internally about how we could change this operation to better meet the needs of huge sites on slow network connections download, here a thought about how you could protect against the re-upload everything. Before you start each download Muse, use Filezilla to download the muse_manifest.xml from your site. (It's originally with the index.html file). If the FTP of Muse download is interrupted, use Filezilla to the muse_manifest.xml you copied in the back upward on the server. Which will cause the Muse of repeat the partial download. The download includes the files that have been downloaded before the previous download process was interrupted, but it will avoid Muse re - download everything.

• How to download ftp

  I try to download the site using ftp host and does not work. I can't pass the point of connect. Tells me password or log in not correct. On the log tab, I typed user id. Unless I need to type something else, everything is OK, because the same info that I use to connect via filezilla where I don't have any problems. Anyone no matter what ideeas?

  Please check the destination file as if you have the permission to a specific location to access within the server.

  Thank you

  Sanjit

• FTP problem (I think?)

  Hi, I'm fairly new to Dreamweaver, but I've successfully designed and built a new large enough website which works well on the web for several months now.  I update regularly using cyberduck as my ftp.

  I just tried to download several new pages/changes to my site, but without success.  Download cyberduck fine changes.  I followed my usual way that always works. But when I go on the web to see my site, the changes are not there.  The old version of my site still seems to be on the web, not the other.  It comes despite the new site load up in cyberduck as usual.  The new changes etc. work fine when I provided in safari, Firefox from Dreamweaver, but not when load on the web?

  Can someone point me in the right direction on this?  Is this something that I did in Dreamweaver or is this a problem with my cyberduck ftp?  I'm confused!

  Thank you.

  Yes, one of the points I mentioned.  Some changes spread immediately on some servers, pages are cached and you must wait a few hours to a lot more time to make the changes take effect :-)

• Firefox Download Manager problems

  The default in Firefox Download Manager began to show strange behavior today: no matter what file I try to download (in the default \download folder or in a folder chosen by me) is actually downloaded by the browser, but the file download status bar always a message "unknown time remaining" while being entirely green (https://www.dropbox.com/s/n891ya38ifm83c3/Cattura%20di%20schermata%20%284%29.png?dl=0).

  The real problem is when I download .torrent files that are downloaded the torrent client need to start (torrent client that does not start because for firefox, is never finished downloading .torrent).

  I tried to disable the antivirus (bitdefender), but the problem persisted. Chrome downloads work fine (as with active antivirus).

  It's the b9 32.0 and it has been fixed and will be in the build 32.0 then, probably the RC1 build 32.0 if normally such a fix would be a beta version as 32.0b10. The release is Tuesday next so little time. From topic: config you can try to change the empty value of browser.safebrowsing.appRepURL in the meantime.

  For not not reading the useful comments are bug / spam.
  Bug 1057764 - Download Manager regression in the update of FF32 beta 9