Download the hp Recovery Manager software

Similar Questions

• How to order or download the system recovery software?

  Hello

  Most HP laptops already have called the program "recovery manager" that is built into the laptop. This allows each user recover the laptop whenever they need to.

  Now, there are some situations where you can not use the program from the desktop or even during the boot.

  If this is the case for you, I'll post here how to order or download the system recovery software.

  This video is very useful for users who cannot access the recovery Manger in windows or during boot.

  I suggest, if you are unable to download the recovery image on a USB drive to call HP @8004746836. Order a recovery through HP disk might cost if you are no longer under warranty.

  THX

  Hope it will be useful.

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.

  Update Code error 80070490

  There, I had a update failed on Windows Vista Service Pack 2 (KB948465).  I tried the Mr. fix it, but the execution software failed.  Some time later, I'm now at the point where all of the updates fail and gives me the error code 80070490.  I tried the system tool - didn't work.  My computer is preinstalled with vista home premium, so I have no disks.  I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.  Choose 'The essential system updates for Microsoft Vista SP 1'?  If so, he wants that I uninstall first.  How can I do this?

  Hello

  For any questions about the HP recovery process, contact HP.

  Here is their Web site about this link:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  This is the Microsoft Information about your error code 0 x 80070490

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  To make the Installation of repair upgrade in the Microsoft link, borrow Microsoft Vista DVD a friend.

  Here is the information on how to do it:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Problems accessing the HP Recovery Manager after the installation of new copy of Windows 7.

  I have the HP Pavilion dv6 (2043us) originally with Windows 7 Home Premium. A recent storm crossed in my area, which seems to me to be the cause of a corrupt hard drive file that prevented Windows startup. My extra fathers using copy of Windows 7 Ultimate (is a prominent IT guy for his company, he has a lot to lose) I decided to install it from that rather than using the HP Recovery Manager in order to save my files (Windows Startup Repair and system restore failed, and to restore the default factory was not desirable) as I mentioned it because of my desire to save my documents) I have installed on the same partition as the original windows, allowing files to be viewed in Windows.old.

  However, after all that, I came to the will to restore the default settings. However, after you press (esc) and (f11) to access the Recovery Manager, it is bring up the Windows Startup logo and the login screen. Is it possible to access the Recovery Manager and restore the default settings? If so, how should I do this? As I said, I left all the original parts intact, so I do not think it is possible after some research, but I'm not sure how to start the process.

  This method to get the active recovery partition was first introduced to me by Cheryl here on the site. It may or may not work.

  Right-click on computer and click Manage > search in the list on the left, and then open disk management. You should see the recovery partition it. Click right and whether it is active and the next time that you start it up, it should boot into the recovery partition and restore back to the factory.

• Windows Vista does not start after you use the Hp Recovery Manager. What should I do?

  I used Recovery Manager to reinstall Windows Vista Basic 32-bit. During installation, it shows 0% completion although at the end it says everything is ok. After clicking on the button finish, he starts up the Recovery Manager again asking if I want to recover Windows. If I choose the Cancel button it restarts with the same Recovery Manager screen. What can I do?

  You can call HP technical support at 1-800-474-6836. Or you can give your product number, not the serial number, and I'll try to send you the link to order yourself.

• The Acer recovery management will not run on switch 10

  By the switch of my Acer 10 owner's manual, there are steps proposed to "create a backup recovery" and a "driver and application backup. But the Acer Recovery Management will run. When I click on Acer recovery management application, I get the screen of the security clearance. I click on "OK" to continue. Nothing happens. I tried several times. I also tried to run as an administrator without success. I have a 32 GB flash drive ordered. Is the flash drive must be inserted into the switch 10 for the application to run? If not, what am I doing wrong

  You must insert the USB pen to perform recovery management, either by the way, if the Acer recovery management does not work, you can use windows built-in recovery.

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

• Receive an error message, not enough space, when you perform a backup of the file in the HP Recovery Manager

  Hello

  I have a Pavilion dv7-6b32us using Windows 7 64 bit

  Laptop will not start. (A separate issue I posted on the card for laptop freezes) and Im trying to back up my drive through the HP Recovery Manager. I get a message that there is not enough available space. Y at - it anyay to save my disk to save the news?

  Hello

  Click Yes.

  Kind regards

  DP - K

• I can't download the latest I Tunes software (Version 10.7)

  I can't download the latest I Tunes software (Version 10.7) although I had no problems to download previous versions. I get all promts but although the download begins, he is arrested and the message ' I tunes has an invalid signature "Any ideas?

  The best way to do this is through the Community Forums of Apple.

  They know the right way to solve their own problems of software.

  Good luck with it there.

  See you soon.

• Cannot retrieve the hp Recovery Manager.

  One day my windows got crashed and I installed windows 7 on it, but has not removed the recovery drive, now I can not install the hp Recovery Manager. help me what can I do to install it n get back breaking my original windows because I see the recovery of files in my recovery disk.

  Buy a Flash DRIVE recovery HP or HP partner. Click on the link to the way to order a. USB STICK recovery media is more robust and is considerably faster than DVD media.

  http://support.HP.com/us-en/document/bph07143

• As part of the Blackberry Desktop Manager software blackBerry Smartphones calendar

  Hi all

  It would be a good idea to have the BB calendar as part of the Blackberry Desktop Manager software, then head of could be made on the PC and then synchronize with a BB or vice versa all.

  I don't have a company server, simply old MS Outlook on my PC.

  Kind regards

  Leslie.

  Hello

  As what I suppose be a business strategy, RIM specifically does not provide a PIM/Organizer with their software. Rather, they provide guidance to PIMs different so that the user has the choice as to which PIM they prefer. See the matrix for which PIMs are supported by different versions of the RIM DTM software:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB12268&sliceId=1&docTy...

  BES is not required to synchronize a calendar with a BB. Indeed, you can synchronize with the tools available today, two-way calendar, contacts, email, etc. etc. etc.

• Where should I copy my personal files temporarily before you run the HP Recovery Manager?

  Hi to everyone at HP!

  Recently, I am experiencing problems with my HP Pavilion dv6, so in order to solve these problems, I have decided to use the HP Recovery Manager to restore the factory specifications it is. I was committed to do when I realized that I didn't have a way to back up my personal files (I don't own an external hard drive, nor enough empty disks).

  After reading this post , I learned that I can save my files to a partition in the HARD drive.

  (Hope I'm clearly so far)

  It turns out that I have 3 drivers of partition (C :), (d) and (e).)

  

  My question is; If I temporally copy my personal files (d :) or readers (E :), they will always be there after that I completed the recovery operation?))

  Thanks for your time.

  D: is your recovery partition, and no file should be backed up/saved there. Saving files it can cause the recovery fails.

  E is probably the small partition system used by Win 7 to start. Not a good idea to save it & probably not enough space anyway.

  Better to wait until you have an external source to backup the files.

  BTW, if using recovery disks for HP reinstall will erase all partitions and restore to the factory plug. Only recovery F11 or Recovery Manager in the menu start leash added partition intact.

• Download the Adobe Digital Editions software

  Tried to download the Adobe Digital Editions software, but when I click on the link to download, I get "cannot display this page". Tried for 3 days - any suggestions please?

  I finally downloaded it - that's what I did:

  Downloaded ADE_4.0_Installer zip file from //helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html

• I downloaded the trial of photoshop software, but when I open it, 30 seconds later it fails with the "adobe closed the folder" statement without error codes

  I downloaded the Photo Shop trial software but when I open Adobe closes in 30 seconds and does not provide error codes

  Hi Jeff

  No, I received no errors during download. The trial

  Photo shop is PS CC 2014 and I have Windows 7

  The game, November 6, 2014 14:58, Jeff A Wright, [email protected]>