Problems accessing the HP Recovery Manager after the installation of new copy of Windows 7.

Similar Questions

• during the installation of licenced copy of windows 7 Home Premium - I can't write my username keyboard wired - num light is off - hoe to write?

  I tried to install a licensed copy of windows 7 Home Premium 64 bit on C: or D:.

  Up to write user name, all measures are gradually running & stops at 'write username. because I'm unable to write because of the keyboard NUMLOCK is off. When I press the num lock light button is "ON", when I release the finger of the num lock key light is disabled (unable to write with key board.

  In contrast, windows 8 Pro gets comfortably installed on C: or D:. This means that the keyboard is ok.

  What is the problem with the installation of windows 7 so that the keyboard is not recognized (active) while writing "user name".

  Can you try to connect the keyboard to a different port and see if it works?

  Turn off the system

  It again, go into the BIOS and change USB legacy mode and see if it works.

• Only problem with the installation of new version of adobe flash player

  Hello. I'm unable to install the latest version of adobe flash player. I don't get the error messages as the cause of most of the people on this forum. What happens is I run the Setup and it tries to install a second, and then the installer screen is empty, as you can see in the picture. nothing happens after that. I tried to uninstall and reinstall. Some advice on why this is happening?

  Hi Casey,.

  When you downloaded this file?  That's a problematic installer that we removed from our servers last week (Wednesday, 25 March).  If it is still downloading it is either put in cache on our servers and we need clear cache again, or it can be cached in your browser, in which case, clear the cache of the browser will download a new installer and unproblematic.

  Thank you in advance.

  --

  Maria

• Problem with the installation of photosuite (solution Center) windows 7

  Hello

  I have a new computer windows 7 64 bit laptop and lost the installation for my printer disc. (HP Photosmart C4180)

  I downloaded the necessary drivers etc HP which at first seemed to succeed only to find at the end of the installation, that should be deleted photosuite. (It could be called HP Solution Center) I need to be able to use the scanner.

  Someone at - it ideas?

  Concerning

  Sharon

  Hi sharon_love,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-74950-2&CC=US&DLC=en&LC=en&os=4063&Product=1141647&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• I have problems with the installation of adobe reader for windows 10

  I can't install adobe reader for windows 10

  Hi magda, m

  Please see the troubleshooting provided in this KB doc steps: installation troubleshooting Adobe Acrobat Reader | Windows

  Check if that helps.

  Kind regards

  Meenakshi

• After you install a new copy of Windows 7 and updates, download now not a genuine copy

  I installed a new copy of my subscription to windows 7 pro N everything worked ok until he says is not a genuine copy, I got here with my subscription then done some update so why might occur

  Hello

  Have you replaced any hardware, or reinstalled Windows 7?

  It is possible that the store of licenses of Windows 7 may be damaged or unreadable. Try the steps below to re-create the store.

  (1) open an Internet browser
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop sppsvc (it may ask you if you're sure, select Yes)
  Note: the Software Protection service may not be running, that's ok.
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start sppsvc
  (10) type: slui.exe
  (11) after a few seconds of activating Windows dialog box will appear. You may need to reactivate and/or re - enter your product key or Activation can
  happen automatically.

  If you have a product key, you can re-enable Windows 7.

  1. click on the Start button
  2. type: slui.exe 3 and press the Enter key
  3. Enter the product key from the sticker on your computer
  4. click on the next button.
  5. you will be asked if want to enable, click ok

  You can also activate by phone as follows:

  1. click on the Start button
  2. type: slui.exe 4 and press the enter key
  3 select your location from the menu drop-down and click on the next button
  4. the next screen provides the number to call to activate by phone

  How to contact a Microsoft Product Activation Center:

  http://support.Microsoft.com/default.aspx/KB/950929/en=us

   
  For reference:
  Refer to I see messages that Windows isn't genuine. How can I solve this? from the following link and check:
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ
   
  Hope this information helps.

• Problems with the installation of new system. Need help.

  Hello

  I'm new here so I'm sorry if I posted this in the wrong section, I tried to look for this subject but nothing similar has come so I decided to create this.

  I have a HP Pavilion DV7-1020ea, which came with Windows Vista Home Premium 32 - bit installed and a recovery disk that was on the D: partition, but no real recovery disc/DVD.

  This laptop has had a hard drive failure lately, so I replaced it with a new hard drive cool (320GB, same accompanying).

  The new drive as you probably already know is fresh and it does not all partitions or any information, so without recovery of D: partition.

  I need to mention that the phone was fully functional, keyboard, touchpad, and quicklaunch worked correctly.

  I have some experience with computers, so I know how to recover, set up the startup in the bios etc.

  I tried to install Windows XP Professional 32-bit and Windows Vista Home Premium 32 - bit on my laptop but I found out that the DVD drive makes a funny (not damaged or broken), as a lack of sound recognition. The two systems of Windows are original, and I have a license for them.

  Its different when I try to install WIndows 7, the DVDs are recognized immediately. All system disks work on other computers and work quite correctly. The portable disk drive is not damaged.

  The only thing I saw was: No. Bootable Device (3FO)

  I didn't know what to do so I handed the laptop to an expert.

  When I arrived at my computer back, the computer had Windows 7 Ultimate 64 bit installed, but the problem was that quick launch buttons, keyboard and Trackpad was not working. The only way to use the computer was to plug in an external keyboard and mouse which is not a solution.

  -The keyboard not working outside not BIOS, press No button in text fields do not work. The only functions that worked were when I pressed fn + f8 to make the screen brighter and oddly enough, it worked, so when I pressed the keyboard caps lock, caps lock lights on the laptop keyboard as well.

  -The touchpad itself does not, the keypad or buttons. The only thing that works is the light that changes when I press the button disable from white to red, and then from red to white.

  -The quicklounch does not work. The works of power button (turn on the laptop since it is a button) but the led behind it does not work. For speaker and Wifi light is always red (off) and even when I touch it, it will turn blue/white. The rest has a white light behind her, but does not work.

  I also noticed that when I go into the BIOS, the bios is absolutely slow. It takes about 30 seconds to react when I press the buttons on the right, but also it does not react sometimes and it's like in all sections (but it works for keyboard).

  Later, I went to the Device Manager and discovered that there are 3 basic system devices that are not installed. I tried to install by searching online and locally, but no drivers were found.

  All devices have "the drivers for this device are not installed (Code 28)" and the drivers can be found online or on-site.

  Details of devices:

  Basic device PCI system bus 6, device 0, function 3

  Basic device PCI system bus 6, device 0, function 1

  Basic device PCI system bus 6, device 0, function 4

  Trying to fix my keyboard, the touchpad and quicklaunch buttons I went on Synaptics website to download the drivers for the touchpad, updated it, restarted, did not work. I also went on the official site of HP to download the drivers for quicklaunch to my computer, keyboard and mouse, put up-to-date, did not work.

  I also tried to put in the DVD of Vista and XP DVD to see if the computer is able too see them at all, but when I went to my computer and looked at the DVD player, it says "Insert disc in drive E:." so none of them have been recognized by the computer.

  I don't like Windows 7 and I would really like to have my laptop runs on my old system which is Windows Vista Home Premium 32-bit with keys on keyboard, keypad, tactile and functional quicklaunch.

  Could you help me then install the Vista drivers or to solve this problem?

  Tank you!

  You are the very welcome.

  See if the chipset driver installation done something to help.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  It would be the only suggestion I can offer.

  I think you have a motherboard problem or something related.

• Problems with the receipt of a copy of Windows Vista

  They gave me a free Express Upgrade to Windows Vista when I bought my laptop.

  I him have not yet received after 8 weeks of waiting.

  Is anyone else having the same problem or I am one of the few unlucky? Any help would be appreciated.

  So why you didn t call your local dealer where you bought your machine? Or called microsoft?

  If I were you, I'll go to my dealer and say certain things. :)

  Welcome them

• Problem with the installation of new software for new HP officejet J4550 and I think it's b/c I upgraded to windows7__

  I recently bought a hp officejet J4550 printer, fax, copy, scan and tried to install the software, but ran into problems: it reads is not compatible and I'm guessing that b/c I've upgraded to windows 7 this is not recognize it.  In the printer box, however he says ready Windows7 so I don't know what's wrong or what I need to do? Any suggestions?

  Contact HP support.

  Windows Update has nothing to with the upgrade of Windows. Please these questions in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Qosmio F30-114 - a problem with the installation of operating system

  Hi all
  I have a problem during the installation of operating system from the recovery disk (Win XP Media Center Edition).
  After loading the disc, I seen the installer welcome window, set up all the parameters in it and pressed the OK button.
  After that, an error has occurred (in a black console window):

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JVC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04629R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  After reading this message and pressing a computer key restarts and that's all that happens.
  Also I can not install another OS (Win 7 for example), during the last part of an installation, I get a message "the work cannot be completed.".

  That's happened? I don't understand what is the reason for this problem. I was reinstall another OS (the drive recovery too) often earlier and everything was OK.

  You can install WXP using the Microsoft installation disc?
  Set the BIOS on the settings by default and to use the recovery disk again.

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded

• Have a problem with the installation of CF9

  Hello

  I try to install CF9 on my computer, but I have a problem, once the installation is complete and he gets to the part administrator and Migration (the part where it opens a browser). I enter the admin password, and then click ok, then he's going to the page that says that the server is configured. There is a note that says that it can take a few minutes, but after a wait of 10-15, I get a time-out error that says that demand is greater than the permitted time limit. I don't know what to do at this point. I tried reinstalling and changing installation options, but nothing works.

  On a note separated, once the installation is complete, I get a Jrun4 process in Windows Task Manager and it completely my computers memory hogs. After a few minutes, it will use about 500 MB of memory and the computer is unusable because of how long it takes to respond to each click.

  Help, please!

  Here are the stats from my computer:

  (Filled all the requirements of system)

  Windows Vista Edition Home Premium

  AMD Athlon (TM) 64 X 2 Dual - Core TK-57 1.9 GHz processor

  959 MB OF RAM

  32 - bit operating system

  My default browser is Google Chrome and it's what he uses when it goes through this problem. I tried manually run the link administrator with IE and firefox and I get the same problems.

  My computer is a HP Compaq Presario F700 laptop and its about 2 years while working well, maybe it's just not up to running CF9?

  Thanks for any help,

  Alex

  I've never used this cfstart.bat file to start CF.  The process to install a Windows Service must have been created: use it.  I don't know if it makes a difference, but through a shell you do in CF cfstart.bat may not be a perfect way of doing things.

  The CF error you get just means that CF is pulling the plug on your request because it takes so long.  I think that, by default, there is a 60 sec timeout.  I've never seen CFAdmin take 60-sec to boot.  This setting is usually configured via CFAdmin and not sure where to turn off if this same setting prevents a bet in CFAdmin.  I'll have a look later... time for me to jump on a bandwagon.

  Maybe put your Xmx set back up to at least 256 MB.  To save a little bit more RAM, you could probably reduce your - XX: MaxPermSize to the low a little too (maybe up to 64 MB?  Not sure about that).

  Your PC seems to be quite tight on resources, if you need to do this kind of thing, btw.  I note that you use only 1 GB of RAM on a Vista machine.  EEEK.  I wouldn't anything less than 2 GB (and would prefer 4 GB while she performance).  Your question may that Windows is having to share a RAM disk too, which will slow down everything until analysis.  Which seems to be what you feel.  Windows itself needs... what... about 400 MB to run these days, before you start trying to assign any what RAM in other applications.  1 GB is not enough.

  --

  Adam

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• After the installation of new original canon cartridge pg40 my canon printer cannot recognize ink

  After the installation of new original canon pg40 cartridge my printer canon may not recognisd ink

  Hi Jeet,

  1. What is the model number of your printer?

  2. you receive messages or error codes?

  You can check the following link and try to run the fixit and check.

  Diagnose and automatically fix problems printing and printer

  Alternatively, you can contact Canon for help.

  Support for Canon

• Problem with the installation of the webcam VX2000

  problem with the installation of vx2000.  After installation, I hit finish and get error Lifecam.exe has encountered a problem and needs to close.  The program is installed and the icon on my desktop but when I try to open it I get the error.  There is no Logitech drivers installed, have the latest version of the driver, uninstalled/installed in many times, did a clean boot.  Tried on another computer (same operating system) cam and installed and worked perfectly.  Reformatted the drive on my computer and and had the same problem error once again.  Checked the error reports and it shows kernel32.dll as the defective module but it, s not to be missed in System 32.  It may be corrupt and I would like to replace it.  If anyone can shed some light on this problem it would be greatly appreciated.  Thanks, Max

  Hi Max1215,

  Follow the steps in the article.

  Troubleshoot failures to find the new LifeCam hardware

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software