Similar Questions

• Once I update my phone to iOS9 will always sync with iTunes on my iMac with OS 10.7.5?

  Hello, my name is Catherine and I have a few questions. First of all, where I am and where I want to go:

  I have an iMac end of 2006 with OS X Lion installed, which is the most recent this computer can manage, if I understand correctly.

  My iPhone is a 4S which currently still holds iOS6 (6.1.3) installed. I want to upgrade to iOS9.

  Now the questions:

  The iPhone 4S is compatible with iOS9? If so, can upgrade directly to iOS9, or do I need to step it up?

  Once it is upgraded to iOS9 will always sync with iTunes on my old iMac?

  Any advice on this process are appreciated.

  Thank you for taking the time to read and respond to my request.

  Catherine

  Side note: it was strangely difficult to determine which community/category for this post, so if this is not the right pair, pointing me in the right direction would be more useful. Thank you!

  You need at least OS X 10.8.5 (not 10.7.5) or later version to use iTunes 12.3 which will supported iOS 9.

  http://www.Apple.com/iTunes/download/

  Yes, the iPhone 4S turn iOS 9 (but the iPhone 4 does not work).

  It syncs with your old Mac?  It depends how old.  The Mac must be running at least OS X 10.8.5 and hopefully will last OS X 10.11.1 (current version).

  You can update your Mac directly - if you can update the Mac at all.  If you can update depends on the age and model.

  http://www.Apple.com/OSX/how-to-upgrade/#hardware-requirements

• I've been trying to download updates from Windows, but they will go through. I received the error code 646 was the last.

  I tried everything that was offered and I am still unable to solve my problem. I also have updates pending when I close my pc but when my pc stops that they still operate as if they were never installed. It says installation updates when I turn on my pc to restart, but still they always appear everytime I go to restart or shut down. IM pulling my hair out on this one. Any suggestion or help please. I didn't do anything or add anything to my pc. I run Vista in case this may help.

  You may have missed: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• because I downloaded the 7.0.1 version it takes forever to reach any site

  I downloaded the 7.0.1 version recently and since then, the browser appears to hang when you try to reach any url. Sometimes it is faster but on average, it may take MINUTES or never reach the page. I also use GoogleChrome and access is instant. My connection is fiber optic wide Bank, 6 mb, so this isn't a problem. In recent years, FireFox is my favorite browser, but if this problem persists I'll be forced to use an alternative one.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  You can try to decrease the value of the pref Network.http.Max - connections from 255 to a setting more modest as 30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
  • bug 692260 - increase Network.http.Max - connections seem to cause hang, requires a restart of the browser

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• Apple watch ever the size of the file download updates? I have little download caps and would like to know the size of the file before downloading. Also to take advantage of free download period... is 02:00 until 08:00 a way to schedule download

  Apple never shows the size of the file download updates? I have little download caps and would like to know the size of the file before downloading. Also to take advantage of free download period... 02:00 until 08:00 is there a way to plan downloads?

  Yes. Informed of an update, select "install tonight". The downloads will be scheduled to occur at 02:00 local time.

  Make sure that your MBA is connected to the power of this night there.

• I have a simple question which I'm sure someone will be able to respond easily - I have windows xp, I've added nothing to my machine, but it does not now download updates - when I try to go on the microsoft download Web site - I can't. Help, please.

  I don't know how long this has happened, I get the shield down, but my downloads are not downloaded.

  I know that I probably won't get a response to my three questions, but I want to post a separate thank you.  It's really great that you use your knowledge to help people like me who just bumble along...  Thanks again.

  Now I have 3 questions that are not questions of direct update but I have the feeling that you can help.

  I now have service pack 3

  1. is windows better than Kerio firewall
  2. I said do not install IE8 - what you think
  3. should I perform MAM and Onecare safety scanner regularly.

  I thank in advance.

  J

  You're too kind, Joan. And, you're welcome mowst. Let's start from the beginning.
  Does firewall Kerio and AVG protect your system ?
  Go by the log MBAM, the answer is No .
  Windows native firewall is a sufficient protection when a system is on a network where the router contains a hardware firewall . A router that has a hardware firewall is not so expensive and well worth the investment.
  You can use a wired router, as opposed to a router costs a little more, if necessary.

  Now, as for the antivirus, I'm not a big fan of the AVG used by the user to type.
  I would recommend that the user typical home use AntiVir or Avast on moy. Like AVG, both are free for home use.
  For paid AVs, I would recommend NOD32 or FPROT .
  Microsoft Security Essentials, which is also free, we hope to be a solid AV, but I can not recommend at this stage.

  Installation of critical security updates, it is a needs . It seems that some malware has been able to infect the system due to the absence of the same installation. Specifically this one:

  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet004\Services\Tcpip\Parameters\Interfaces\ {f5eb5c1a-9817-46c9-b36a-6a6a007a8621} \NameServer (Trojan.DNSChanger )-> Data: 85.255.115.110,85.255.112.175-> quarantined and deleted successfully.

  Indicate if another update problem occurs that you wait not long to take care of it. Installation of critical security updates prevent many infections.

  I think that IE8 is the best browser that MS has ever released. If you choose to install it, strongly suggests you download the standalone installation package manually and Save it. Close all open programs and browsers.
  Temporarily disable the antivirus installed by following the steps in clean boot, and then install it.
  Make sure that you reboot twice when it installs.  You should receive at least a prompt to reboot, but do another after recommend an anyway.

  Now, back to the question 3. Strongly suggest you boot the system in Safe Mode and do a full scan of the system, just to be sure that MBAM has detected and deleted all the malware. Make sure you update MBAM before each scan .
  You can do it in normal mode Windows or Safe Mode with setting in network, but not in Safe Mode as long as the system is not connected to the internet in Mode without failure.
  It will take time for the full analysis to run, but it was worth. There may still be present hidden malware.
  And Yes, do at least an fortnight analysis with MBAM is well worth.
  In fact, you should consider buying the paid version, as the protection in real time, unlike the free version, and it will not come into conflict with the installed AV.
  Did a scan monthly with the OneCare safety scanner is also a smart thing to do.

  BUT , if it were a client system, I no longer trust him to bank services online or any other financial transaction.
  The system may have wrong headed by the DNSChanger trojan to web sites that were not what they seem.
  As well as information from financial transactions, passwords that you use, and no personal information stored on the system were also sent to the malicious web servers.
  To strongly suggest that you change every password you use just to be on the safe side.
  If you need or want to do transactions from this new system so the only way that you can trust , it is to format the hard drive and reinstall XP. Now that Service Pack 3 is installed and If you have the XP installation CD, you can do what is called a slipstream SP3 with the installation CD. In this way when format you and reinstall XP, it will be the SP3 and you'll save time by not having do not install several security updates.
  It's really not hard to do. Here's a good tutorial with graphics that explains it all:
  XP CD slipstreamed Windows using SP3

  And, finally, any AV or security program protects a system when the user installs the questionable software .
  Be very careful of free software, stolen software, cracked, key generators and other programs.
  Always investigate any software that seems too good to be true. As in real life, something that seems too good to be true probably is . Discover the software using Google or Bing to see what others have to say and to report on this issue.

  Be careful and safe surfing, Joan.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Windows Update will not download updates.

  Today I've eliminated my Windows xp and you use the xp disk I reloaded and formatted a new. I did this in the past and had no problem today, I find that after doing everything and windows stops then I went to windows update, that he asked to install active x and will not update download. There is nothing in my add and remove programs. Not sure how to proceed

  • http://*. Update.Microsoft.com

  • https://*. Update.Microsoft.com

  • http://download.windowsupdate.com

  • http://windowupdate.Microsoft.com

  Open Internet Options, Security tab, click Trusted sites, click Sites.

  Uncheck: Require server verification box, add the 4 websites above.

  Try again, if successful, use the custom Option and uncheck all of the updates.

  Read the first update for .net to tell the first and only download.

  Download it, reboot and go back to check again for any .net and .net only download.

  Make updates to .net security, then check again for .net or .net Security.

  When there is no more .net then do the other.

  Perform these tasks in groups and not all at the same time.

  This how to install .net first will save problems later.

  If you want to have the time and Patience, you must install the Service Packs first.

  If you later reinstall OS and you install the drivers manually install the Service Packs right after OS reinstalled before installing any drivers. You can first install the drivers but it is better Service Packs first as sometimes when you install a Service Pack after the drivers, you can find some drivers do not work and you have to reinstall these drivers.

  For people using the original image, your drivers are already installed then install Service Packs just after the factory restore before installing applications or devices or download Windows updates.

  Service Packs using immediately also save hundreds of download of the updates of Windows first of all that all updates to the top until the release of Service Packs are included.

  XP Service Pack here:

  http://support.Microsoft.com/kb/322389

  You can download it manually or order a CD from the link above.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Here are the numbers 1-800 that will put you in contact with a human being who will take your order: team Microsoft Supplemental part. The disc will cost $3.99 more delivery charges.

  1-800-360-7561 United States

  1 Canada-800-933-4750

  Vista Service Packs here:

  http://TechNet.Microsoft.com/en-us/Windows/bb738089

  This page will display the SP1 of Vista, under the heading: order a DVD of Windows Vista SP1, click on your region and then select your country and will take you to a page where you can buy the SP1 and SP2

• After a clean install of Windows Vista Home Premium, how long will it take to run updates and it will take a lot of bandwidth?

  updates after clean install of Vista Home premium

  I plan on upgrading the hard drive on my laptop two year old, which will require a clean install of Vista Home Edition full.  I live in a remote with the satellite internet service.  I would like to know in advance what will happen after the installation with the updates of the program.  I will ask you to install them? It would take a lot of bandwidth?

  Hi EllenCB,

  Welcome to Windows Vista community responses.

  Once you make a clean installation on your hard drive is erased. Now, when you install the operating system return updates that have been deleted will be delivered by Windows update to install on your computer. To save time and bandwidth, you can directly install Service pack 1 and Service pack 2 for Vista which would contain more updates. Of course when you run Windows update and when you try to download from the internet, your download speed will decrease. It is best to keep your system up to date which will allow your version of Windows to run better.

  Before installing the update, run the checksur tool, this tool is running an ad hoc analysis of inconsistencies that might prevent future maintenance operations. Download the tool from the link below.

  http://support.Microsoft.com/kb/947821/

  Please let us know if you need additional assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  Hello

  If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):

  Update the software on your Apple Watch - Apple Support

• Windows Update will now download updates, many different error codes, Control Panel does not open.

  the main problem would be not to download updates, my icon appears in the lower right of windows but I can't open reguradless of what method, control panel and update windows stand closeing

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  After the foregoing:

  What antivirus/antispyware/security products you have on your machine? Include all that already been including
  those that you uninstalled. (These can leave leftovers that can cause strange problems.)

  A search for all most .cpl files will be in "C:\Windows\System32" However, you can have others. Click
  each of them at a time and see if it does not start - if so right-click on it and rename it using cpZ as the extension is is to find. Retry Control Panel - if no joy persevering of all .cpl files. (Note that others are under other files under C:\Windows not should be judged, because they are not active).

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and others.

  Try these in case the General corruption has a role to play:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------

  Icons do not appear in the Control Panel, or you cannot start Control Panel, Windows Welcome, or
  Games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  It was reported a updated driver it has blocked, so have you updated drivers
  lately? Also check the driver updates in Windows Updates.

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Win XP Pro will download updates but install fails

  I have a problem with win xp pro. When I download updates they will download but the installation fails. At the same time when I would shut down the computer, it would be the installation of the updates. Now she even won't do it. Is the a link to the updates, where I can download updates and install them manually? I think I did it once but I forgot to bookmark the link. Now all I get is there is no update available.  I have the auto download and install settings, so I don't know if I'll keep updating the value. Is there a way to check my updates are up-to-date. Also, I ran fixit and he could not solve the problem. Thanks in advance

  Hello

  
  The following article applies also to Win XP. You can go ahead and run. See the article.
  http://support.Microsoft.com/kb/555461
  
  You tried to run the clean boot mentioned in my previous post. If so, then back with the results.

• Download xp online as my pc will not take my disc that I have parts of the missing software

  Download xp online as my pc will not take my disc that I have parts of the missing software

  Hello

  There is no download available.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• my computer will not download updates for windows 7

  My computer stopped the download of updates about 3 weeks ago and now even when I press download updates it will not.

  It says download 35 updates and progress are always zero with 0 KG and it lasts for a long time now.

  Post proposed by the facilitator for the appropriate forum placed

  Windows 7 update problems? First read this.

  :)

• IPS module will not download updates to the signature.

  Hi all

  I have a Cisco ASA 5512 - X with the IPS/CPU module. I'll try to get the device to download updates of the signature but am encountering problems. I have a valid cisco.com user account concluded the GUI to activate this feature, but the download updates never really.

  Is there a way to manually apply the updates of the signature?

  Why updates will not download automatically? The device can ping from public servers for example 8.8.8.8

  Please let me know if there is smoehting I am doing wrong, or if you want the order details/see configuration etc. Everything else seems to work very well, traffic is spent actively through the probe.

  Thank you very much

  -Ross Merrifield

  The IP address of management must be able to access the internet. So make sure routing is in place. There is not a way to make use of other interfaces, I know.

  Thank you

  Steven