Downloadable ACLs for users?

Similar Questions

• Downloadable ACLs for users of VPN

  Hello

  I replaced the old pix with ASA (7.2). There were groups configured for the remote VPN users authenticated through the ACS and ACS download a specific ACL for each group to the PIX. After the replacement, users cannot establish the VPN connection. After troubleshooting, I discovered that the downloadable ACLs were not working very well. When I disabled this option the established tunnel. When I get back to the old pix with the same configuration, it works very well with downloadable ACL option. I opened a TAC case and he said the v3.0 ACS (I) are not compatible with the ASA. He did not really convince me and he asked to try to use the option to pair AV. I tried option pair AV with ASA and it did not work also. can you please advice.

  Hello

  Check out this point,

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCef21184

  In addition, 3.0 is very old, and I guess that in this version, we have "Downloadable PIX ACL" and not "downloadable IP ACL", on ASA download able ACL will work but with "Downloadable IP ACL" but not with "Downloadable PIX ACL".

  Kind regards

  Prem

• Download ACL for VPN users. ACS 4.1 & 1841 router

  Hello

  I have configured the router 1841 as a VPN server. All VPN users get authenticated using RADIUS ACS 4.1

  I need to apply downloadable ACLs by user.

  I configured the Downlodabale ACL ACS. Same ACS event report shows that the ACL is applied to the authenticated user, but traffic is not blocked or past accordingly.

  What is your configuration?

  I think that the more easy to do is to use IPSEC TIV in interfaces, as well as the aaa authorization network and on the radius server, use ip:inacl to the cisco av pair, as

  IP:inacl #1 = permit tcp any any eq 80

  IP:inacl #2 = permit tcp any any eq 443

  ...

  Some documents:

  http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t14/feature/guide/gtIPSctm.html#wp1090634

• ACS and download ACL for multiple clients-AAA

  Hello!

  I need to know if it is possible to download ACL on the DACL device that is not a part of the conversation of RADIUS? In other words, I have a user who needs access to certain resources and attempts to connect to the network via PIX1. I need to authenicate it by ACS and download ACL PIX1 and (attention) PIX2 also (some firewalls upstream). Is it possible to do?

  I don't think that you can do. As you mentioned that the other PIX has no Radius configuration. And you can push only DACL of the Radius on the PIX server, she asks, not in any other PIX.

  And I'm not aware of any mechanism or feature, which allows you to transfer the downloaded ACL of one PIX to another.

  Kind regards

  Prem

• Download ACL GBA 5.2 using authentication for 802. 1 x

  Hi all

  I configured ACS 5.2 for authentication authentication of 802. 1 x. It works as well, getting customers belong to their VLAN respective after a successful authentication.

  Now I want to assign downloadable ACLs for particular users can someone help me in the downloadable ACLs configuration GBA 5.2.

  Any feedback is much appreciated.

  Thanks in advance,

  Selva.

  Hi Selva,

  Based on that you want to assign the DACL? based on the user name? Group?... etc?

  This document will be useful for you:

  http://tiny.cc/ogrxvw

  ignore the part of the SAA. concentrate on the config of the ACS.

  The doc use ASA as the AAA client. The difference is that you use a switch. but the idea is the same.

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• Several downloadable ACLs by ACS user group

  It is possible to map several downloadable ACLs to a single user or group of users use ASA and ACS?

  For example, you have an ACL controlling access to servers (ACL A) and another ACL (ACL B) internet access. Is it possible to assign several ACL to a group of users, such as user group can only access the servers, while the user group B can access servers and internet (ACL A + B ACL)?

  Thank you and best regards.

  George,

  The user and group settings only would allow you to select only a single instance of DACL list at once.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080a9eddc.shtml#configuringtheserverwitfddhias

  Kind regards

  Jousset

  The rate of useful messages-

• Change the default file for downloads and some user folders locations

  A big thank you to all who have helped me, more recently DAXnnn and try * 3.  I come once more in need with questions.  For the cleaning of my boot partition before cloning to a smaller SSD, I'm getting cause folders USER My Documents, my music, my pictures, and my videos to be moved to a different physical disk drive.  I also want to do the same with the downloads.  After trying to use MKLINK (without success) and the location of the tab in the properties for folders (in vain), try * 3 put me on editing the registry.  While I did not yet any change, I followed his instructions to look under HKEY > CurrentUser > software > Microsoft > Windows > CurrentVersion > Explorer > Shell user folders and confirm watch registry.

  What I found is that the actions I took before running into problems using the options of localities had caused registry entries updated to show the new names of path of My Documents (under personal in the registry path) and my music.  This leaves downloads, my pictures, and my videos to be changed before the data transfer of the boot partition to reduce before cloning.  I discovered the writings of my pictures and my videos contain a variable %UserProfile% then the names of folders.  My assumption (often a wrong thing to do, I know) is that I can change these entries replacing %UserProfile% with the name of path, including the drive etc letter describing where I want to move the old data and write new data and changes.  IS THAT CORRECT?

  Regarding downloads, what I discovered is the second entry in HKEY > CurrentUser > software > Microsoft > Windows > CurrentVersion > Explorer > User Shell Folders, below (default) is a name {374DE290-123F-4565-9164-...}, displayed once indicating the value of % USERPROFILE%\Downloads.  Using my penchant for the skip logic, I assume that I can edit this article replace the value data with the path name where I want future writing downloads.  IS THAT CORRECT?

  If I can confirm or correct information, I am very close to stripping the size of my partition boot prefixed operation clone to place what's left on my SSD.

  Thanks to all for participating in such a large forum community!

  HR

  Yes you are right.  If you want that your download location for be moved, just change:

  Old: %userprofile%\downloads

  New: E:\OtherDrive\Some Windows\

  This will make all your downloads stored in the folder 'folder of some '.  Just be sure to include a folder name and make sure that this folder actually exists.  Make sure not to say a disc like E:\ or all your documents could get dumped at the top of this reader, rather than in a folder.

• Is there a website similar to the old Central stock Adobe, where individuals would download actions for other users to download?

  Is there a website similar to the old Central stock Adobe, where individuals would download actions for other users to download?

  You should probably ask in the forum for the specific program

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it says all communities) to open the drop-down list and scroll

• Why ACS can not display page downloadable ACLs

  Hello

  I have a GBA for windows, version 4.0.1.27.

  After successful installation, I found there is not point of downloadable ACLs in the shared component profile? I can see his support on the right place.

  Why not configure downloadable ACLs in this ACS, y at - it all the other work I have to do?

  THX

  Hello

  Try this.

  Configuration of the interface-> Advanced Options

  Click the check box for

  Download ACL user level

  Group and level downloadable ACLs

  Click on submit

  Then go back to the shared profile components and it should now be an option.

  HTH

  Jon

• ASA5520 and ACS 4.0 - AnyConnect WebVPN (Clientless SSL Tunnel) does not downloadable ACLs (DACL)

  I'm having a lot of problems called "Clientless SSL-Tunnel" AnyConnect VPN sessions - i.e. those that are enacted by visit https:// via a browser, and let the Java/ActiveX plugin will automatically run Fat Client AnyConnect VPN for you - downloadable ACL honor.

  Our installation is integrated via RADIUS Cisco ACS 4.0.

  Dynamic group-> connection profile strategy seems to work for either (direct according to AnyConnect VPN Client heavy or indirectly via a browser-> /Java Client ActiveX), however, our only downloadable ACL take affect if the user instantiates the SSL VPN via AnyConnect VPN Client Fat; first of all, users who access the site through the "Browser-> https://" route seem to have no ACLs applied to all?

  I understand that I can change the custom "Cisco VPN/3000/etc" parameters RADIUS, such as 'WebVPN-filters' and 'WebVPN-Access-List' to apply an ACL configured locally on the firewall of the SAA, but what I have to configure to make the sessions ' WebVPN/Clientless-SSL-Tunnel"to honor the DACL that sends our ACS?

  It is a known problem with some Software ASA Versions see bug cisco CSCtv19046 - DACL is not applied to acre during connection via the Web portal. You probably need to update your ASA 8.4 (4.1) or a later version.

• Download ACL ACS 5.2

  Hi all

  How many lines ACL is possible configure in downloadable ACL in ACS 5.2?

  Best regards

  Evandro.

  Hello

  GBA 5.x, you have 2 ways to send ACLs and the other has no limit and the other.

  The limitation is the maximum size of 4096 bytes, which can have a RADIUS packet.

  Option 1 - VSA Cisco. Supported by older versions of IOS.

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  Basically, you need to use Cisco VSA attributes in the format like for example:

  IP:inacl #100 = udp allowed any any eq bootps

  IP:inacl #200 = udp allowed any any eq field

  IP:inacl #300 = permit ip any host 192.168.80.2

  IP:inacl #400 = permit ip host 192.168.80.2 all

  IP:inacl #500 = deny ip any one

  ' 1) go to: "elements of strategy >... > authorization and permissions > network > authorization profiles > create and on the"common tasks"make sure that you use no name of downloadable ACL (see screenshot).

  (2) then the RADIUS attribute tab enter the ACL line-by-line (see screenshot).

  Then, you link the authorization profile to access the Service.

  Step 1:

  

  Step 2:

  

  Option 2 - DACL. Here, the ACL is fragmented into several packages if necessary RADIUS. This is supported by the IOS devices on the latest versions of IOS: 12.2 (33) SXI on the Catalyst 6500, 4500 catalyst release 12.2 (50) SG and then on Catalyst 3750/3560 and 2960 families on 12.2 (50) SE.

  1) go to: ' policy elements > authorization and permissions > named Permission objects > downloadable ACL "and create a dACL (see screenshot).
  "" 2) go to: "elements of strategy >... > authorization and permissions > network access > authorization profiles > Create" list dACL for a link to the authorization profile (see screenshot).
  Then, you link the authorization profile to access the Service.

  Step 1:
  

  Step 2:
  

  Full configuration example:

  http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/Whitepaper_c11-532065.html.

  Hope this helps,

  Tiago

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Integration of Cisco ACS and Cisco NAC Manager - downloadable ACLs

  Hello

  I have Setup Cisco NAC in my environment. These are all works well. The users themselves will get authenticated via Cisco NAC Manager. The Cisco NAC Manager meets with Cisco ACS for the part of the user database. These are all works well. I would like to activate downloadable ACLs. I tried to use the CISCO-AV-PAIR method and creating a downloadable ACL entry in the shared components, but nothing works. It's either I'm doing wrong or this configuration of the mine does not support downloadable ACLs? Please advice kindly.

  Kind regards

  RAM

  + 6 012-2918870

  Hello

  It is not possible.

  You cannot push the ACL in the NAC manager.

  If you make the Radius of NAC authentication manager, you can do is create roles the NAC Manager, and on the roles you define traffic strategies.

  Using the Radius attributes you can then map users to roles.

  Please, take a look at this:

  http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_auth.html#wp1158789.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Download ACL checking of the switch

  Hello

  I have download ACL goes to the 4500 Series switches and 3750. GBA 5.2, I can see when an ACL is downloaded and it is very good, and switch, I can check for downloadable ACL name.

  My question is how can I check the DACL to see to whom it has been applied and any other available details OF the SWITCH?

  I know see the list of access shows me the ACL, but I could have the same ACL applied to many different users on the same switch and I'm looking for a way to validate from the switch to which users the ACL has been applied to.

  Thanks in advance.

  Try this:

  show ip access-list interface
  
  
      Regards
  
      Jatin
  
      

  ~ Make rate of useful messages.

• Dynamic ACL for Radius outer (ACS 5.3) accounts

  We have a Cisco ACS 5.2 server that queries another server radius for some AnyConnect VPN connections. We already use for some users dynamic access lists in the user Interal identity store. We would like to link in a list of dynamic access to users in the external database, based on the username passed back from the external radius server. We run ACS 5.3.0.40. Is it possible to do?

  [5.3 running and use AD then suggests to install the latest patch 5.3]

  Ok. Suppose attribute is in AD and called DACL. then proceed as follows

  1) go to

  Users and identity stores > external identity stores > Active Directory

  and select the tab "Directory attributes.

  (2) add the attribute named list DACL and save changes

  (3) build the authorization profile which will return the DACL

  Reach

  Elements of strategy > authorization and permissions > network > permission profiles > create

  in tab "Common tasks", select "Dynamic" for downloadable ACL name

  then select "AD - AD1" and the attribute selected in step 2

  and press on submit

  You know a profile authoirzation which will be dynamically retrieve the AD attribute and use the name of the downloadable ACS

  (4) further to the authorization policy, select this profile authoirzation

  for example:

  Access policies > access > by default access to network > permission

  Should be good to go

• Download iTunes for Windows 10

  I am trying to download iTunes for Windows 10 and get these two messages:

  The feature you are trying to use is on a network unavailable resource.

  And...

  Cannot remove the older version of iTunes. Contact your technical support group.

  Can someone please help?

  Kind regards

  Fred.

  Take a look at this trick of CSA provided by the user to help with iTunes and Windows troubleshooting. Take the time to read through the tip of all, and then follow the instructions to your problem. Troubleshooting problems with iTunes for Windows updates

  Turingtest2 has compiled the most comprehensive list of iTunes and Windows troubleshooting tips. You should be able to get your problem fixed with this tip sheet.