DPS Push Notification certificates does not

Similar Questions

• TPServer 8710 - Custom conference ending the notification text does not

  Hi all

  in our network, we have 8710 TPServer and etc.

  the "Conference of custom ending the notification text" does not work

  What do you advise?

  tkanks a lot.

  Hi Onur,

  We have therefore 3 numbers

  Conference custom ending the text of the notification, notification of CTS - Man 10 minutes and 2 minutes of GST.

  This should be no Rendevouz for meetings,

  -What version of CTSMAN?

  -Do you see the BBFRR in CTS?

  -See you BBFRR in C20?

  -Do you think the meeting scheduled in CTS - Man?

  -When in the conference can you send a normal text to CTS?

  For one of the question:

  Use of conference custom ending the notification text

  Ending Conference custom notification text

  End notification text Customer conference

  If you check the help:

  Use custom Conference end notification text allows the telepresence server to use a personalized message to warn participants that the Conference ends.

  The telepresence Server uses a message by default unless you check and write a personalized message. The default message is that this conference is about to end.

  Does not apply to the Cisco CTS endpoints.  See the reference endpoint interoperability for more details

  -Gonzalo

• The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  That's what I have I am trying to download adobe programs

  which is not a download error unless you use some sort of download manager/assistant that is also trying to install.  do you have a download manager/assistant?

  or is it an error of installation and, if so, what type of program (name and version) are you trying to install?

• Could not open install Assistant.  I get this error message: cannot install the application due to a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not

  How do I download a trial of 12 items, Adobe?

  I followed the instructions to download assistant... but get this message: the application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the author of the application.

  Hi alposer,

  Please delete the copy of Adobe Download Assistant you have installed, and then reinstall Adobe Download Assistant.

  Kind regards

  Rave

• DPS: Push Notifications

  DPS, how certificates of Distribution and development NPP for the Push Notifications?

  Hello

  For more information on the creation of the push notification requiring Apple certificates, see the iPad edition Companion Guide PDF .

  Thank you

  Laxman

• Skype notification sounds does not at all RESOLVED

  On Win 7, I installed Skype 6.21 but notification sounds worked... When I checked the settings and tried to play all the sounds, it does not makes all the sounds as well.

  I decided to uninstall it and install Skype 6.22, but it has the same problem... I checked google if there are similar problems, but I found only old Skype 5 forums and so on and no one has helped me solve my problem. No idea what to do?

  RESOLVED: the reason why it didn't work was the scene of singing! For all those who have the same problem, the solution here:

  Tools > Options > Audio settings, look for the "Ringtone" section, if said option 'speakers use selected', to 'double headphones and speakers.

  In Skype, open Tools-> Options-> sounds. The text on the button says "Mute all sounds"? Be aware that if the text is "Activate all sounds", then all sounds are actually set on mute.

  In addition, open Tools-> Options-> Audio settings. Which device is selected for "Ringing"?

• Update of root certificate does not (error CAPI2 event ID 60)

  Hello

  I recently did a clean install of Windows 7 SP1 on a new system.
  I noticed that there are sites including https / SSL certificates do not seem valid where I don't expect it (for example BBC laboratories), using the two Chrome and IE.
  After some searching on the forum of other messages, I followed it down to a problem with Windows 7, do not automatically update root certificates installed. Specifically, using MMC event logging, CAPI2 event ID 60 (store) returns 5 "access denied." This causes then event ID 11 and 30 to not like the certificate chain fails to build and check.
  Other points to note:
  • Normal Windows updates work fine
  • Most of the sites using https / SSL works fine (i.e. a root certificates are installed with success - if those provided with Windows or have been updated since the installation I don't know)
  • I tried to disable all my firewall / antivirus programs where they prevented updates, no effect
  Anyone know a fix for this - I don't really want to having to perform a complete reinstallation :(
  Thank you!

  Thanks sirot,.

  Unfortunately, this does not work.
  In the end I just did a re-complete installation of Windows which seems to have solved the problem.

• Failed Anyconnect corresponding certificate does not deny the user

  Hello

  I'm trying to implement matcing certificate when you use Anyconnect.

  I want ASA to check the issuer CN to a value.

  I have it configured, and it works.

  But when the corresponding defective certificate, the user still have access. It connects to the GRP_policy 'GroupPolicy_solbakken-any-test', but it should have failed.

  The log looks like this

  09:28:04 | 716001 | Group user IP <62.148.39.161>WebVPN session began.
  09:28:04 | 734001 | DAP: User Øystein solbakken, 62.148.39.161, connection AnyConnect Addr: following DAP records were selected for this connection: DfltAccessPolicy
  09:28:04 | 716038 | Group user IP <62.148.39.161>authentication: success, Session type: WebVPN.
  09:28:04 | 717037 | Research Group of the tunnel using certificate cards failed for the peer certificate: serial number: 2266234 A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = dc = local, lund, issuer_name: cn=lund-S-TRD-AD-01-CA,dc=lund,dc=local.
  09:28:04 | 113009 | AAA recovered in group policy by default (GroupPolicy_solbakken-any-test) for user = Øystein solbakken
  09:28:04 | 717037 | Research Group of the tunnel using certificate cards failed for the peer certificate: serial number: 2266234 A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = dc = local, lund, issuer_name: cn=lund-S-TRD-AD-01-CA,dc=lund,dc=local.
  09:28:04 | 717037 | Research Group of the tunnel using certificate cards failed for the peer certificate: serial number: 2266234 A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = dc = local, lund, issuer_name: cn=lund-S-TRD-AD-01-CA,dc=lund,dc=local.
  09:28:04 | 725002 | 62.148.39.161 | 65223 | Complete appliance SSL negotiation with customer Internet:62.148.39.161/65223
  09:28:04 | 717028 | The certificate chain has been validated successfully with the warning, revocation status has not been verified.
  09:28:04 | 717022 | Certificate has been validated successfully. Serial number: 2266234A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = lund, dc = local.
  09:28:04 | 302014 | 62.148.39.161 | 6875. 89.248.2.6 | 443. Connection TCP disassembly 2213 for Internet:62.148.39.161/6875 to identity:89.248.2.6/443 duration 0: 00:00 4448 TCP Reset bytes - I
  09:28:04 | 725001 | 62.148.39.161 | 65223 | Count of negotiating SSL client Internet:62.148.39.161/65223 TLSv1 session.
  09:28:04 | 725007 | 62.148.39.161 | 6875. SSL session with client Internet:62.148.39.161/6875 is complete.
  09:28:04 | 302013 | 62.148.39.161 | 65223 | 89.248.2.6 | 443. Built of TCP incoming connections 2214 for Internet:62.148.39.161/65223 (62.148.39.161/65223) at identity:89.248.2.6/443 (89.248.2.6/443)
  09:28:04 | 725002 | 62.148.39.161 | 6875. Complete appliance SSL negotiation with customer Internet:62.148.39.161/6875

  Can someone help me with this? I only want users successfully matching certificate to connect, all others should be rejected.

  Concerning

  Øystein

  Hi Øystein

  You can by mapping all users to a group that does not have a connection, for example:

  internal DenyAccess group strategy

  Group Policy attributes DenyAccess

  VPN - concurrent connections 0

  tunnel-group NoAccess type remote access

  tunnel-group NoAccess General attributes

  Group Policy - by default-DenyAccess

  crypto ca certificate map mymap 65535
  
  subject-name ne ""
  
  webvpn
  
  certificate-group-map mymap 65535 NoAccess
  hth
  
  Herbert
  

• Error - certificate does not match the profile: the default keychain is not a corresponding identity

  Hello

  Building our iOS app, but make that mistake every time.

  I have regenerated all the CERT signing request, all the way to the p12 file, but still get the same error.

  The "You can fix this link here" goes to https://docs.build.phonegap.com/en_US/support_failed-builds.md.html#cert_profile_mismatch , which never loads.

  I really need to get this built, so would appreciate any help available.

  Thank you.

  -Evan

  You also regenerate your provisioning profile? This sounds like the configuration profile does not contain the certificate that you downloaded.

• vRA: certificate does not appear to extend to the port 5480

  So it is perhaps yet another silly question but I can't find a good answer, so I'll just ask.

  vRA 6.2, certificate of our company CA, cert SAN with all of the individual (short and FULL domain name) DNS names, IP addresses and the name of VIP and IP. 443 regular cert appears fine. When you go to: 5480 the self-signed is shown. Thus, when the installation of IaaS starting on the first page of "Connection device information" certificate, he wants me to accept is the self signed (host device name shows as the < FQDN of the VIP >: 5480).

  Y at - it something I need to fix somewhere or the VAMI uses simply not cert?

  Hi Rebecca,.

  I promise a post on this sorry... did not actually.

  The short version... VAMI currently works to lighttpd. As such it does not use the same certificate as the vRA Web application store.

  Instructions to replace the VAMI cert are here:

  http://pubs.VMware.com/vCAC-61/index.jsp?topic=%2Fcom.VMware.Vcac.install.doc%2FGUID-E6515C12-61DA-4F67-8F44-C740B778743B.html

  Grant

• Regeneration of vCenter device certificate does not

  I'll put up a new vCenter Server Appliance and for some reason that the function of regeneration of certificate is not up-to-date certificate with the new host name and of the period of INVESTIGATION.

  I toggle regeneration of certificate of 'Yes' to reboot the device, I can see during startup until a line specifies that 'hostname has changed... regenerating SSL certificate', no errors I see appear.

  However, after that, I connect to the web console to https://x.x.x.x:5480 and verify the certificate and there always localhost.localdom the original DHCP assigned IP so the cert address has not changed!

  How can I get a new cert to regenerate?

  Thank you

  OK, so I just found this discussion here: http://communities.vmware.com/thread/447770 about 5.1 update 1 has suspended to regenerate the certificate after the reboot.  The user could get past the issue of hanging of manually generating the certificate from the command line.

  While I wasn't the problem with the suspension he had, I was able to follow the procedure for manually generating certificates.  It worked great and my cert now matches the host name.

  Not sure what is causing my problem, but this seems to have done the trick.

• Disable iMessage app (Mac) when I hit iMessages on iPhone (El Capitan - Notifications fix does not work)

  I think that this question is a little different from the others posted. I am not connected to iMessage on my phone. I think my MacBook is my Apple ID associated with it, but I've not logged in the App, and I already turned off all the boxes of banners/badges/alerts and unchecked everything in system preferences > Notifications menu.

  However, the question that I find annoying, everytime I go to iMessage on my iPhone application appears at the bottom of the screen on my Mac, even if I am not logged in. Exit iMessage on my iPhone and it disappears on my Mac. There is nothing in common with my Mac, but its boring whenever I'm Messaging on my iPhone application appears on my MacBook, and I watch my Mac to see whats moving on the screen but its just letting me know that I have the app open on my iPhone iMessage. Does anyone know how to disable this feature?

  I just want it to be completely gone and not follow when I open the iMessage app on my iPhone. Does anyone know how to do this?

  Thank you!

  Hi James b. Moore,.

  If I understand your question, whenever you use the Messages app on your iPhone, you will see it appear on your Mac and you do not want the application on your computer, right?

  Looks like you have the characteristics of continuity enabled on your Mac.  The resources below will explain how to disable features such as transfer to separate the activities of your Mac and iPhone.

  Continuity of use to connect your iPhone, iPad, iPod touch and Mac

  Transfer procedure

  With the transfer process, you can start a document by e-mail or message on a device and pick up where you left from another device. Transfer works with applications Apple such as Mail, Safari, maps, Messages, reminders, calendar, Contacts, Pages, Numbers and Keynote. Some third-party applications are also compatible.

  Disable the transfer procedure

  If you want to disable the transfer on your iPhone, iPad or iPod touch, go to settings > general > Handoff & suggested Apps. Can disable Handoff.

  On your Mac, go in system of preferences > General. Can uncheck the setting allow Handoff.

  With continuity, all SMS and MMS text messages that you send and receive on your iPhone may also appear on your Mac, iPad, and iPod touch. You can also meet your contacts from any device is closer to you, including your iPad or Mac.

  You can start a conversation in the Messages application or click on a phone number in Safari, Contacts, or calendar.

  Set up SMS and MMS with continuity

  1. You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
  2. Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
  3. On your iPhone, go to settings > Messages > Send and receive. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and turn on the device or devices that you want to transfer the messages.  (Disable this function if you want no messages will appear on your Mac.)
  4. Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.

  Take care

• Android DPS html e-mail does not work

  In a DPS I add webcontent: html notefields and buttons to clear the note or to send the note.

  on the iPad, it works fine, but on android, I received the message:

  Web page not available:

  the Web page on mailto:?subject=WEC%20Consult%20 & BOD is temporary. is not available or is moved to a new webadres.

  Does anyone know how to handle this?

  Kind regards

  Dan Eilers

  Hi Anton,.

  You must use window.open (url) instead of window.location = url; Then it won't work. I have just confirmed with a small test script:

  Test URL

  Neil

• Notifications made does not sound when it is locked

  Hello everyone, I have just converted to android to iPhone and I have a question that seems weird and apple support put me hold and hung up. So I got an iPhone 6s and an iwatch. This is the problem when the phone screen is locked notifications for texts come only through the Watch not watch it and the phone

  me when someone calls the watch vibrates and phone rings properly fair notifications is messed up. I turn off the watch and the notification sound is normally on the phone I checked DND and the section of sounds and all that is very well it's not if. I checked the settings of the watch and the app shows and I see not everything related to notifications only through the watch I'm not new to Apple, I had, iPod and iPad etc I know my way around them. All ideas

  Maldonw wrote:

  Hello everyone, I have just converted to android to iPhone and I have a question that seems weird and apple support put me hold and hung up. So I got an iPhone 6s and an iwatch. This is the problem when the phone screen is locked notifications for texts come only through the Watch not watch it and the phone

  me when someone calls the watch vibrates and phone rings properly fair notifications is messed up. I turn off the watch and the notification sound is normally on the phone I checked DND and the section of sounds and all that is very well it's not if. I checked the settings of the watch and the app shows and I see not everything related to notifications only through the watch I'm not new to Apple, I had, iPod and iPad etc I know my way around them. All ideas

  There's nothing weird about this at all. If the phone is locked, the notifications are supposed to come through on the watch. Which works as expected.

  You don't have the ability to disable detection of wrist in the application of the watch. If you do this, notifications will come across the two devices. However, you will need to enter a password on the extra hours of shows that you want more to look at the main screen, and you will not be able to use Apple pay.

• How can I set up email when the field on the SSL certificate does not match?

  I am a customer of Dreamhost and don't know if our situation is unique or not, but both smtp and imap are "mail.example.com" even if the SSL certificate belongs to ' *. DreamHost.com'.

  I was not able to set up the email on my flame app because I get the following error:

  > Could not establish a connection with "mail.example.com". There may be a problem with your network or server.

  I think the problem is the lag of domain name, but I can't find a way to accept the certificate.

  Hello!

  According to the official DreamHost wiki site , you can try this (cut-and-pasted from the page). If it doesn't work, there are still other options available on the page.

  To connect to the mail server using the name of the server dreamhost.com instead of messagerie.votre_domaine.fr.

  Use the following steps to determine the name of the server to use:

     In the DreamHost Control Panel
     Click "Account Status" in the upper right hand corner
     Look for the "Your Email Culster:" at the bottom of the list.
     Find your cluster in the table below.
     Use the server name for the incoming server in your mail program.
  

  Name of Server Cluster e-mail
  homiemail-sub3 sub3.mail.dreamhost.com
  homiemail-sub4 sub4.mail.dreamhost.com
  homiemail-sub5 sub5.mail.dreamhost.com
  homiemail-master homie.mail.dreamhost.com