DR. for the tables of the BNE (webadi)

Similar Questions

• I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.

  When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.

• Issues related to the cell property node: Position Active for a table control

  Hello

  What determines the Position of the Active cell in a table control property node? I have this in my code and display the value of an indicator on front panel. The displayed value is always set to 0,0. Help for the property node says it's "read - only" so what defines the Position of the Active cell in a table control value?

  Define you the active cell with a property node.  Once you select an active cell, you can do this cell and single cell-specific things, things like the background value color.

• Assistance needed for the registration of the application and store the values in a table

  Hello

  Hope that this explanation is not confusing. I explained my application you want in the text below and also attached a skeleton VI + screenshot hoping that he will clarify

  I try to do a VI that does the following:
  1. some code (blue Subvi) runs every 200ms
  2. every 200ms, a random number is generated
  3. the random numbers are stored in a table in intervals of time s 0.8 ("iterations")
  4. at any time, the (blue Subvi) code needs to have access to the random numbers generated in 'the previous iteration.

  To clarify, the iterations are as follows:
  Iteration #1: 0 - 1.8 s
  Iteration #2: 2 - 2. 8 s
  Iteration #3: 3 - 3.8 s

  Iteration #4: 4 - 4.8 s
  ..
  And so on...

  So for each iteration: the blue (Subvi) needs to have access to the random numbers generated in the previous iteration, for example:

  Iteration #1 (0 - 1.8 s): The blue (Subvi) Gets an array that contains only the zero (random numbers are recorded for the first time)
  Iteration #2 (2s - 2 8 s): The code gets an array containing random numbers of iteration #1
  Iteration #3 (3 s - s 3.8): the code gets an array containing random numbers of iteration #2
  Iteration #4 (3 s - s 3.8): the code gets an array containing random numbers of iteration #3
  ..
  And so on...

  At any given time in time;
  -The code gets an array that contains all the random, recorded during the previous iteration numbers
  -Values since before her previous iteration are ignored and not stored anywhere

  Thus, for example, to the #7 iteration:

  -The values during the iteration #6 are made available to the code in the form of a table

  -Values of #1 to #5 iterations have been deleted and not stored anywhere

  It is important that all values since before recording the previous iteration are deleted because they are not necessary because VI actaual will work for a long period of storage of numbers a lot more than I have indicated here

  Screenshot of the skeleton VI:

  

  I tried to play with the paintings, the structures of the case and the registers at offset, but everytime I try I get something wrong

  The skeleton VI is also attached (Iteration_VI and Code_SubVI)

  Any suggestions?

  Thank you!

  Yes, I agree that you need help.  First of all, you really do need to learn more about LabVIEW - spend a few hours with the tutorials, such as those mentioned on the first page of the Forums.  Oops - links to the tutorials which had been present for years seem to have been moved "elsewhere" with August 2016 LabVIEW community reorganization.  But look for them...

  Here are a few screws that basically implement what I described above (with some minor modifications).  First of all, this is a Top level VI which runs at 5 Hz (200 msec waits).  It starts with an array of 5 elements of 0, then once per second, this is replaced by a table of random numbers generated by the Random 5-table sub - VI 5 elements.  Note that I do not use a loop timed - those who are really designed for LabVIEW RT, but use the simplest functions on the Palette of the timer.

  

  Can't you see how that works?  The array to initialize on the left begins you with a table of 5 elements of 0.  The Timer inside the loop, it runs at 5 Hz, 'Index' counts 1, 2, 3,... to tell you where you are, and 5 shows you everything that lives on the shift register.

  Now sub - VI Random 5-table is supposed to do the following - if she was called to 5, 10, 15,..., it must return a (new) array of 5 random numbers, otherwise, it must return the array that was passed in.  So if all "works", table 5 shows 0, 0, 0, 0, 0 for the first second, a table at random for the second second (which is not superfluous!), a different for the third random picture second and so on.  I have already said a way to build this, but I chose a slightly different method (equivalent).

  

  Whenever it is called, a new random element is generated and added at the end of a (growing) random table stored in the shift register.  If size become 5, we send this Random-table-of-5 out through Out table and reset the register shift to an empty array.

  The case by default (when the size is not equal to 5) is shown below - we just return the array of entry to and accumulate new random table in full growth.

  

  These code fragments extracted from VI.  If you have LabVIEW 2016 (see the "2016" at the top right of the image?  This shows that it is a snippet of code LabVIEW 2016), you can open a blank diagram and drag this image, where magic OR converts it to a VI.  Otherwise, the code yourself and try out it.

  Caution - it is designed to run once.  If you run the program of high level, a second time, you may find that the new Random 5 - table appears to 0.4 ", 1.4", 2.4"(instead of 1", 2 ", 3").  I leave as an exercise for understand you to (a) why he is and (b) fix the code.  If you can't do that, then move an another 3-4 hours with the LabVIEW tutorials (or start playing with this code, edit it in some small way and to understand how it works).

  Bob Schor

• The search in a table 2d-coordinates for the point of click

  I'm doing a VI that creates a layer of 2d points on an image imported (as pictured). These points are generated by a Subvi, which simply draws points over and over again (based on the 3 selections of initial angle). All the coordinates of the points are stored in a data feed that is sent to a registry change for other future functions. Each coordinate corresponds to an electrode, labeled 0-255, goes into the lines first (although that could change, but I guess it would be easy to change). Labels are created through 2 loops (as seen in diagram 1).

  I would now like to click on a particular point and put it out in a different color, but also an indicator show me what electrode I clicked. I seem to be at a loss on how to do it! I need explore a table 2d-2 groups of the element, where she looks for the line first, then the corresponding column (or vice versa, it is not serious, but just for ease of understanding, let's say she is looking X first, where the columns first) and compare them to 2 elements (the mouse click coordinates).

  Here's what I've done so far. I need to search for the function in the following way; If find X, look no further columns and select that particular column where the X was found and begins to look for the values Y and and then stops when the value of Y is. Once the two values are found, take these out of the loops and throw them in a cluster and the function of drawing lots.

  Thank you!

  p.s. in case anyone is wondering why I have the function "in the range" in there, it's so that the user does not have to be exact pixel this allows the user to click within 2 pixels of the coordinate of the point.

  Hi Daniel!

  What do you think of this approach?

  

  We subtract just the mouse coordinates in the coordinated range 2D (Array stores the coordinates of the points on the image), the absolute value and look for the minimum. X and y the selected point index is returned in minutes or the index. You can replicate the fuction "in range" by ensuring min value is not too high.

  With regard to:

  Andrew Valko

  NOR Hungary

• The doc for the function of the subset of the table shows the extensible function

  In LabView 2010 the doc for the function of the subset of the table shows that the function is expandable with indexes and multiple lengths. I can't expand the function for multiple indexes. How can I do this?

  Is the documentation for the function by mistake, or is there another function of a subset of the table somewhere that can do this?

  Subset of table details

  When wire you an array to the function, the function is automatically resized to display entries index for each dimension of the array. If wire you a table 1 d to the function, the function displays the index for an item entries. If wire you a 2D to function, the function table displays the entries index for a line and column, respectively. If wire you a 3D through the nD to the function, the function displays the index for a page entries.

• How do the function of table 1 d search case-insensitive for the array of strings

  How do the function of table 1 d search case-insensitive for the array of strings

  Hi Karine,.

  convert the two (table and search for the string) to lowercase before using this feature...

• Search for the nearest value table

  IM wondering if its possible to find a 1 d table worth, if it is not found, then find the nearest match. IM using the 'double' data type and I need at least an accuracy of 4 decimal point in the research.

  For now, im rounding decimal values to the nearest integers from you, but it is not effective at all. Im getting a lot of unwanted split in the plot. I need to be able to search for the decimal points. I found this function "About Equals.VI" starting from a previous thread. Even that uses the concept of the rounding.

  I enclose 3 screws "0.8 & 0.4.VI" are that I created, rounding decimals nearest digit.

  The "approximately equal" is the one I found online.

  The 3rd is I try to mess with what I can find as close a match.

  Y at - it a trick to work around this problem?

  Thank you

  Eureka

  This VI uses the first type of step 3 in your data.  Since you said that you can get the data, you can drop the in VI.

  At the end where I calculate the slope, you can use a linear adjustment if you have full or professional LabVIEW.

  

  

• Search for the string in the string table and see the following value in the line

  Hi, I'm new I have LV and I do a Vi that read worksheet values and generates 2d channels of the same spreadsheet table. For the moment everything I need is a function that find specyfic string in this table and show the next value in a line. As:

  Table:

  a; b
  c; d
  f; g

  example: find the 'c '.

  VI shoud show "d".

  Concerning

  Not a bad homework problem.  Do it with pencil and paper.  Write your table and pretend you're the computer.  What you want to do (step by step)?  What questions do you have?

  Now that the translation a bit to computers.  You mentioned that the data is in an array of strings.  What structures (LabVIEW) work with tables?  [Do you know how to work with tables?  [Otherwise, review some of LabVIEW Tutorial material - see top right of the first page of the Forum].  What do you know about channels?  What questions you need to ask questions on the channels?  What do you know about string functions?

  Watch these things in some LabVIEW code, 'feed' some data and see what he does.  If it seems to do things "unexplained", you can try to look at the block diagram to run by turning the performance highlight (and if you don't know what that means, use the help of LabVIEW and see the tutorials).

  Bob Schor

• Help with the cluster in table for the cluster size difference, please!

  I will admit to still hurt with the berries of LabVIEW, and as usual, the behavior in the vi attached is meaningless to me!  The attached vi shows a cluster 6 element being converted into a table, then immediately to a cluster.  The reconstructed cluster has 9 elements, even if the table size indicator display properly 6.  How to maintain the initial cluster size when converting to and then since then, a table?

  The f

  Well, if you have worked with context-sensitive help running you would see:

  "With the right button of the function and select the Size of Cluster in the context menu to set the number of items in the cluster."

  The default is new. The maximum cluster size for this function is 256. »

  You must set the size. There is no way for the function to know how many elements in the table.

• Table of standard color for the graph of the intensity

  Hi all

  I am trying to change the color table of a graph of intensity of some tables in color standard, such as 'rainbow', 'gray', 'seismic', 'waves of lava","hot metal","purple haze", etc.. I can't find not "Rainbow" and "grey" somewhere for the examples, but not others. I tried to generate these color tables myself using the example «...examples\general\graphs\intgraph.llb\Create Table.vi IntGraph color, but the result was far from good.

  Can someone teach me how to generate these color tables? Thank you in advance.

  

  Kind regards

  Mario

  Hi GerdW,

  I'm not sure of the exact way to do it, but I did a simple vi based on your idea. The vi to retrieve the color table I want in the table format, subject me to load the bitmap file that contains only the color scale. Some raster color table constants are included in the VI for those in need. Please see the attachments and give me your comment.

  Kind regards

  Mario

• Help for the reconciliation of table. Average cost

  

  So this is my attempt to imitate a function block that we use in our standard converter software - "Decimation filter" which is nothing more than a running average / mobile. The sample size is adjustable to execution of 2 to 64 samples (decimation factor). I saw many topics on this and used to average around 4 large samples shift registers - but I wanted to be able to change the sample size without recompiling. I'm new to LV, there is likely a lot of better ways to do this.

  I would like to have answered is linked to clear the table, if the decimation factor is set to a lower number than the last time that the loop executed. (The uppercase - false statement is wired directly by)

  The math in the shift register: creates an array index that cycles from 0 to (decimation Factor-1). The index is then used to fill elements in the table (the rest being zeros). When the decimation factor decreases, I need zero external element in (former decimation factor - 1) (new decimation Factor-1) positions. So I tried various things, but the only thing that seems to work, it's the re - initialize the array. I think it's less than optimal.

  I tried:

  (1) leaving the tunnel of continuous wire output for the real deal and selecting the option 'use default if unwired' - thinking I'd get a table of 64 elements, of zeros. Doesn't seem to work.

  (2) a constant matrix cable tunnel exit if this value is true. When I followed him, after a decline in decimation factor - the probe seems to indicate an array of elements, not 64 No. And I do not see how to specify the size of the array of constant matrix.

  If I use this in my application it will run on a target of cRIO.

  Any help much appreciated.

  You already have your initialized table, why not use it?  Wire your table initialized via if this value is TRUE.  Or better yet, use Select? function.

  

• Name of the table to query for the time window of work

  I am trying to build a query for a list of jobs in tide. Anyone know what table is for the time window? Please notify. Thank you.

  Hi Warren, according to me, this is the jobdtl table.

  jobdtl_fromtm and jobdtl_untiltm

• encryption of table space work is not for the old imported tables?

  Hello world

  oracle version 11 g R2 database

  I request below: -.

  following the steps I followed: -.

  expdp system / * SCHEMA = VGOTS dumpfile = logfile = vgots.log ENCRYPTION_PASSWORD vgots.dmp = *.

  drop the waterfall VGOTS user

  created a directory of portfolio: -.

  CREATE or REPLACE DIRECTORY encryption_wallet AS ' / u01/app/oracle/wallet;

  changes in sqlnet.ora

  ENCRYPTION_WALLET_LOCATION =

  (SOURCE = (METHOD = FILE) (METHOD_DATA =

  (RÉPERTOIRE = / u01/app/oracle/pochette)))

  created a tablespace

  CREATE TABLESPACE vgo03

  DATAFILE ' / u01/app/oracle/oradata/orcl/vgos03.dbf'

  SIZE 150M

  ENCRYPTION WITH THE HELP OF '3DES168 '.

  DEFAULT STORAGE (ENCRYPT);

  created the user

  create the user identified by vgots VGOTS

  tablespace VGO03 default

  tablespace temporary temp

  unlimited quota on VGO03;

  Impdp system / * SCHEMA = VGOTS dumpfile = logfile = vgots.log ENCRYPTION_PASSWORD vgots.dmp = *.

  My question is:-

  When I create a table in this encrypted tablespace its working fine

  When the wallet is close, it won't let me select table

  error report:

  ORA-28365: portfolio is not open

  but the charts that I imported to expdp allows to select values

  Please help what option is I took all expdp and impdp so that it works also for old tables

  ReemaPuri wrote:

  VGOTSDBTPS was the old tablespace that was not encrypted

  and imported into an encrypted tablespace vgo03

  You can check this. I don't see any clause REMAP_TABLESPACE in your impdp command.

• For the purchase of query tables

  Helloo

  What are the names of table for the fields of purchase please

  Responsibility-purchase-purchase orders

  1. the amount

  2. ship - to

  3 status

  

  Responsibility-purchase-purchase orders

  

  4 category

  Divided into category group and class

  
  

  
  

  5 closure status

  
  

  Navigation - Summary of purchase PURCHASING order-
  

  

  What table to find the following for purchase orders?

  6 Cancellation Date

  7 cancellation reason

  In the PO_LINE_LOCATIONS_ALL where I can find the next field?
  

  
  

  8. remaining quantity

  
  

  
  

  Thank you
  

  
  

  See query below that can help you. I use query on rcv_transactions to see what was received in a first time, but has not yet received in the second stage. You can also consult the lines of distribution to see how much has been ordered and delivered, but know that you can have several distributions for each line...

  SELECT P.Segment1	PO_Number
  ,	P.Closed_Code
  ,	P.Cancel_Flag
  ,	LOC. Location_Code
  ,	L.Line_Num
  ,	L.Quantity * L.Unit_Price amount
  ,	Category Cat.Concatenated_Segments
  ,	CAT. Category_Group Segment1
  ,	CAT. Category_Class Segment2
  ,	L.Cancel_Flag
  ,	L.Cancel_Date
  ,	L.Cancel_Reason

  , (

  SELECT Sum (DECODE (T.Transaction_Type, 'RECEIVE', T.Quantity * T.Primary_Quantity, 'RETURN to RECEIVING', T.Quantity * T.Primary_Quantity,-T.Quantity * T.Primary_Quantity))

  OF rcv_transactions T

  WHERE T.PO_Line_Location_Id = PL. Line_Location_Id

  ) Qty_To_Be_Delivered

  SAY. Quantity_Ordered

  SAY. Quantity_Delivered

  OF PO_HEADERS_ALL P

  ,	PO_LINES_ALL L
  ,	LOC HR_LOCATIONS
  ,	mtl_categories_kfv cat
  ,	PO_LINE_LOCATIONS_ALL PL
  ,	PO_DISTRIBUTIONS_ALL SAID
  WHERE P.Segment1	'2564686' =
  AND	P.PO_Header_Id = L.PO_header_Id
  AND	L.Category_Id	= the cat. Stuff
  AND	P.Ship_To_Location_id	= LOC. location_id
  AND	L.PO_Line_Id	= PL. PO_Line_Id
  AND	L.PO_Line_Id	= TELL. PO_Line_Id

  ;