My computer may be diverted

If my DSL modem is enabled, the CPU usage spikes every five seconds.  When it is not connected not it goes to 40-60%.  When connected it goes from 60 to 100%.

McAfee, Webroot, Malwarebytes and HijackThis all can't find anything.  Assistance in the forum Msoft says 'cut your losses and format.  I have to format my hard drive or buy a new computer.  I won't buy a new computer while Vista is the only OS available.

Where can I find the instructions to format my hard drive and install XP with all the Service Packs and to load my data without bringing in the malware that kills my system?

I'm sorry if it's not formatted but preview shows me nothing at all.

You are welcome. I am glad that we can help you.

Tags: Dell Software

Similar Questions

  • After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

    After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

    We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

    Can solve you?

    Sorry for my English.

    Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

  • Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full. Error code: 0 x 80007114

    Operating system Windows XP, at startup, I get the message: "Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full"and displays the error code: 0 x 80007114.  (I have a new drive hard with enough space) Outlook Express always open well and functioning normally.  The message mentions and how to fix the problem?  Thank you, Rick

    Jump here (nothing Bruce suggested is false), I did a search and found this old article (http://support.microsoft.com/kb/245419), which indicates that there is a bad entry under the identity key in the registry (see www.oehelp.com/backup.aspx for background).  So if it's a big problem, you can do the steps suggested in this article and that will fix it.  Or if you have just one account, then backup your settings and the identity key and then delete the identity key and then start OE and it will establish a new, and you can then set up your account again, and then import the messages from the older directory.  But it does not indicate the major corruption, so you can just ignore it.

    Steve

  • Not able to launch Windows mail get "your computer may be in memory or your disk is full (0x80004005)".

    Original title: Windows mail does not open

    When you try to open windows mail it comes up with the following: Windows mail could not be started initialize junk filtering.  Your computer may be in memory or your disk is full (0x80004005)

    Then when this compensation have the following come upward: Windows could not start because MSOEDLL could not be inialised.

    Hello

    Sorry for the delay in response.

    Try the steps suggested by "Ahmed Cookis" of the link.

    http://answers.Microsoft.com/en-us/IE/Forum/IE9-windows_vista/cannot-open-Windows-mail-error-Windows-Mail-could/62647f2e-d9b4-4ae3-B07C-8224fec4fe1f

    Answer if you need help with Windows, and we will be happy to help.

  • trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea?

    trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea? I got a microsoft tec tring to understand with a bit of luck again!

    Hello

    in this case, contact the HP support

    http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

    or HP Support forums

    http://h30434.www3.HP.com/

    or repost in the correct forum for windows 7 that I have already advised you to do

  • Windows Mail could not be started. Initialize junk filtering. Your computer may be out of memory or your disk is full. (0 x 80070002)

    Original title: Windows Mail (Vista).

    Windows Mail could not be started.  Initialize junk filtering. Your computer may be out of memory or your disk is full. (0 x 80070002) next: Windows mail could not be started because MSOE. DLL could not be initialized.   My program is Windows Mail (Vista) not Windows Live Mail.

    Problem solved: I set Windows Live Mail as the default program.  Everything works now.

  • My computer may take a long time to stop.

    * Original title: Shut down

    My computer off button does not work correctly. My computer may take a long time to stop.

    Do not press the power button to turn off the computer or to solve a gel. Click on the ORB at the bottom left of the desktop and click stop. If you are having shutdown problems, then select the hotkey Ctrl + Shift + Esc to bring up the Task Manager and click the Applications place the cursor on a running application to select and click on the end task button. As the application is removed from the list, repeat the procedure on the next application in the list until all are gone from the list. If you use the taskbar to access programs simply close all open windows. Then, you should be able to shut down your computer.

    http://Windows.Microsoft.com/en-in/Windows7/turning-off-your-computer-properly

  • Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

    Hello world

    I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
    I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

    I would be very grateful if you could help me

    Hello

    I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

    Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Let us know the results. We will be happy to help you further.

  • Windows Installer error - hardwaree to the computer may not support booting to this disk.

    I need to reinstall Windows 7 in preparation for upgrade to Windows 10

    I use the Bootcamp Assistant to install Windows 7 and have the following problem.

    1. I partition my SSD 512 drivce, creation of a score of 91 GB for Windows. The partition is created successfully and the MacBook restarts on the Windows Setup disc.

    2, I select my BootCamp (91GB) partition

    3. I then click on "player (Advanced) Option, and then click format.

    4. I then get the following error:

    "Windows cannot be installed to this disk. This computer's hardware may not support booting to

    This disc. Make sure that the drive controller is enabled in the computer's BIOS menu.

    What can I do to solve this problem, so Windows thinks he can boot from this partition?

    Please disconnect all external storage devices, USB hubs and external devices. Run the following two procedures, then try again to BCA.

    Reset the management system (SCM) controller on your Mac - Apple Support

    How to reset the NVRAM on your Mac - Apple Support

  • computer may be in sleep mode and run exxentials scan security

    See above

    Lol when your computer is in any mode power saving without programs are running or can be executed.

  • computer may not be updated

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • Programs, you have problems withI cannot update my computer
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Please provide more information, like the Windows operating system you are using, what updates will not be installed, etc. error codes.

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

    TaurArian [MVP] 2005-2010 - Update Services

  • Because the computer may not shut down properly the recovery fails on HP G60-519WM

    1.) product name and number: HP G60-519WM

    (2.) operating system installed: Windows 7 64-bit

    (3.) error message:

    Impossible to restart the computer

    Windows cannot restart the computer in the

    To complete Windows recovery environment the

    recovery operation.

    4.) all changes to your system until the problem was happening:

    I think I have a type of malware or something because my computer started running slower and I continue to be redirected to Web sites randomly when I use Google or Bing.  Records on the right side of my Start menu as 'Computer' and 'My Documents' disappeared.  I also get this an update for Windows live which stops at 57%.

    Problem:

    There is no restore point on my computer if I want to perform a system recovery back to the image of the manufactuer.  I downloaded the USB recovery Flash Disk Utility for my model.  Now I want to recover my computer via USB, but when I run the advanced recovery mode he's trying to restart my computer.  Given that my computer will not shut down properly, I end up having to press the power button until it stops my computer and the recovery does not continue when I start my computer again.

    I tried to use F11, but then I just end up on a screen that says either press on enter to choose to continue with Windows 7, press tab to move to the bottom of the list or press ESC for more options.  I tried all three and they eventually freeze the screen and keys are starting to make a Summit high-pitched beep when I try to press one, so I end up having to force my laptop to stop.

    I also tried to make recovery by pressing F8 and then choosing the "repair your computer option.  Which causes my computer screen go black, and I end up having to force it to close again.

    Is it possible to restore my computer to factory settings?

    Any help would be greatly appreciated!

    JES

    Hi, Jes:

    Yes, it would be the battery.  The relatively heavy bar that is normally removed retainers of slide.

    From what you described, I am afraid that your PC needs a lot of work (probably a bad motherboard), and you'd be much better to buy a new laptop or refurbished, than to pay a lot of money to fix yours.

    I guess you would have to pay more than $200 for repair.

    I'm sorry this is probably not what you wanted to hear.

    Best regards

    Paul

  • Computer may not start

    My computer fails to start whenever I turned on and must go through the repair process of starting for the last two months. I have not installed any new software or hardware. Would it be the Windows updates that I download are at the origin of the problem I've seen? Can you help me?

    My computer fails to start whenever I turned on and must go through the repair process of starting for the last two months. I have not installed any new software or hardware. Would it be the Windows updates that I download are at the origin of the problem I've seen? Can you help me?

    Hey caprikus

    Windows updates are releaased the second Tuesday of each month with the exception of emergency fixes

    If it happens every day that it seems not be updated, the cause because you did a Startup Repair whenever you start your computer

    as you can get it and see if you can borrow a vista microsoft dvd and install an upgrade of the repair

    Read and follow the information on the link below

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    Walter, the time zone traveller

  • My computer may need to delete all...

    I have downloaded on my computer now Adobe products, but my computer is weird. I think I have to erase everything and start over. Adobe allows you to download on three different computers, so I use one of these (license?) now on this one. But I wonder if I start over, Adobe uses the same license (at least, I think that it is the correct term to call it) I have on this computer again, otherwise it will take another?

    Your license is good for both facilities enabled regardless of how many times you can uninstall/reinstall.

    If you have a single-user license, it allows you to have activated the facilities on both machines.  If you remove the Adobe product (s) from your machine you will probably enjoy if you disable the software before withdrawing.  To disable it just open the app and choose help-> turn off in the menu bar above.

  • WARNING: Your computer may be infected.  Call 866-955-6104

    This happened:

    Then, I was unable to close the page, or Chrome, I've tried several times to quit smoking.  I finally forced to shut down the entire system.  It was on my iMac.  I took this screenshot before that I forced its closure.  I am now on my laptop, I was wondering what I need to do.  Do I need to take steps to remove a virus or malware on my iMac?  Most of my searches on Google for this problem referenced PC only.  I'm confused!

    It's a hoax, ignore it. Do NOT call the number.

Maybe you are looking for

  • My Iphone was stolen. How can I find my iphone if someone reset my iphone?

    The first time that my phone was stolen was around the year 2014. I got my phone after that I went to the teacher and Director in this regard. The second time is when I put my phone to my friend because we had ipads at school for schoolwork, but she

  • VI in Application.exe missing Sub

    Hello I did based on PCI 6221 DAQ card applications. I build application.exe. I build Installer 1) 2010 runtime engine) 2 DaqMX drivers included. When I installed and run the application on the client computer. It gives the error code 3. No source fi

  • Important updates from Windows I get this message every time that I reboot

    I received a message on Tuesday, 13 APRIL, saying "26 updates important WINDOWS", "download and install now", this message appears now everytime I restart the computer, but my computer normally automatically updated, these real updates? I don't want

  • Obsolete devices in the AutoPlay list & several entries for the same devices

    I would like to remove 4 entries for "Canon PowerShot A75" on the list of automatic run settings since I no longer have this camera.  Can someone tell me how to remove these?  (I have Vista Home Premium SP2) Someone else has multiple entries in the a

  • Eception exception: means!

    We are working on an application, it's only 80K in size and he will call to the server to ask for a return of the xml files and put in nodelist and then transfer to the table.  and then it's on the screen with the values. BUT, the app is not yet able