Dr-ip-customizer - more than 2 DNS servers

Similar Questions

• Can add more than 2 DNS setting DHCP PIX 501?

  I would ask that can add more than 2 DNS DHCP PIX 501 framework? If so, how? I need to add two external DNS and DNS internal to my DHCP clients.

  Thanks for help.

  PIX only supports 2 DNS and WINS for dhcp clients

  I hope that helps... Rate if he does!

• CLI power to add the NTP server and start the service on more than 150 ESX Servers ntp

  Guys,

  I'm not good in powercli but knows how to make it work if I have scripts. I can some help in getting the ntp settings made on the whole of my box of esx? Thank you.

  Maybe it helps. I just ran it for my ESXi 5 laboratory. Depending on whether you want to connect to each host directly or through vCenter, you may need to slightly modify or place it in a loop for each.

  $ESXHost = "esxi5 - 01.lab.local".
  SE connect-VIServer $ESXHost

  Add-VmHostNtpServer - NtpServer "192.168.201.10" - VmHost $ESXHost
  $ntp = get-VmHostService - VMhost $ESXhost | Where {$_.} Key - eq 'ntpd'}
  Game-VMHostService - HostService $ntp - political "automatic."
  Restart-Vmhostservice $ntp - confirm: $false

  André

• How to specify multiple DNS servers with Dr.-ip-customizer

  Hey guys,.

  The CSV file I get out of the Dr.-ip-customizer tool seems to imply that I can specify multiple DNS servers (it has a column called "DNS Server (s)'").  My problem is that I do not know how...  I tried to put in two server IPs with a space between them, I also tried a comma followed by a semicolon.  The semicolon and space gets the error thrown upward when I try to import that says 'Invalid DNS server field' and the comma causes her think that there are too many columns (since it is after all a CSV file).

  so, any ideas? What I have to put on separate lines or something

  According to the Administrator's guide (P. 56, it is not very clear), it seems that you want to place the second DNS server on a new line with the VM ID and the number of the adapter.  '0' If you want to be global value or the number of actual card to override the global settings.

  Hope that helps...

  -alex

• There is more than one active network connection on your computer

  I have two ISP with 2 different IP addresses of course. With one I connect via cable, the other is wireless. Until a couple of days, I'd keep the Wi - Fi turned off on the front of the case, to allow the laptop to connect only to the cable connection.
  Some sites were not loading, indicating problems with DNS resolution. I checked for possible reasons online. I tried to connect to these sites using a webproxy and it worked, so I thought I would try the wireless connection. I turned on and sites would be load normally. However, when I checked my ISP number this shows that the active connection cable one.
  I hesitated to leave the switch turned on, but in order to leave these sites load, I thought I had no other choice. Needless to say that I am not notified at all or with the networks or computers.
  Everything seemed to work fine until the wireless connection has started having problems anyway, it stopped working (ISP issues), so stopped at new loading sites. I tried troubleshooting it and he said: "it has more than one active network connection on your computer" and suggested I would disconnect them. Naturally, I unplugged the wireless connection. Problems: I can not load the sites that seem to need to have wireless to turn on. Note that it does not need it to be active, only to have this switch.
  Please let me know if there is anything I can do to correct this inability to connect to the servers of some sites without the need to have that switch on. If there is no explanation for this behavior, which does not make sense. Again, I know nothing about networks or computers, forgive my ignorance!
  I use Windows 7 Home Premium x 64, my laptop is a Vaio. This happens on all my browsers and sites that have stopped loading were load normally when I 1st turned on the laptop the same day. To later that day there some sites stopped to load, which made me think it was a matter of site. Then I realized that it was not connect to twitter, which was not down, so I realized it was my problem.

  It looks at when you use the wired connection THAT DNS has failed.

  In order to clarify the names of web sites means absolutely nothing to a computer in itself, www.google.com is completely useless. All comms on a network revolves around the IP addresses and the DNS service is a process by which the dedicated servers which addresses are known can tell your PC what is the address of a Web site. For some reason any on the wired connection your PC isn't getting the address to soundcloud.com.

  In family situations more of a PC it gets the IP of the router settings, of course I don't know if this is true in your case. If you open a command prompt and run ipconfig/all, paste the result here and we can check. This would include which server DNS to use that, as I said is normally the router. There are actually millions of internet addresses, and your router could not store them to remedy this it forwards a request for an address of DNS servers listed in its own configuration of IP internet side.

  If you can connect to the router and look its DSL or WAN configuration, you should find at least one or two DNS servers. Take note of them. If you can't connect to the router then look at the website from your ISP for their parameters.

  On your computer, go to the network control and Internet\Network connections, right-click on your wired card, and select Properties. Double-click Internet version 4 Protocol. In normal use get it 2... buttons should be selected, are they?

  If you change only the down one to use the following DNS server address and enter the fields, addresses that you got the router. Click OK twice, but leave the window network connections open as you need.

  Now, try to get your site into a problem. If you can then the problem is with your router. Instead of asking the router address you have bypassed this stage and went on the server, your router is configured to use.

  If you are still unable to the site then the problem is further down and your router may be OK. Then go back to where you set the addresses DNS and replace those that you got the router and turnkey 8.8.8.8 primary DNS server address and 8.8.4.4 in another address, OK once again two times and then try again the site. These 2 addresses are own Google public DNS servers and should work.

  If the ISP provided the router they should replace it. Explain what is the problem and the results of these tests, although I have no doubt that they insist on their own checks before accepting.

• Put external e-mail in place in British Colombia account more than 20 hours to work. What can I do?

  Develop good host address in the MX record for external e-mail set up. See screenshot. After more than 20 hours for the multiplication, email still does not work. What can I do to fix this? Thank you!

  

  Hey,.

  The field looks ok now - intoDNS: redoyle.com - check DNS server and mail servers status

  Kind regards

  Mihai

• Why is-36 of Firefox on Windows receiving connections from DNS servers? Option network.dns.get - ttl

  Following update Firefox 36, my firewall was flooding asking me to allow external connections from the Internet to my browser. Looking at it more closely, Comodo Firewall indicates that external websites are trying to connect to Firefox, port 53 to an arbitrary port on my machine.

  If I disable the option FF36 new network.dns.get - ttl, it stops. I can't find any documentation or help on this option.

  Why Firefox do this? Is Comodo incorrect when he labels it as an external connection attempt? (It has normally been extremely good to differentiate the incoming and outgoing traffic). I guess that Firefox is trying to determine the TTL for DNS caching, but it is not make sense why DNS servers then try to connect to me.

  I am reluctant to create a firewall rule to that arbitrary Internet connections on my machine are OK as long as their origin on port 53, tips on how to manage all that this new feature is firmly States would be appreciated.

  Thanks in advance for any help.

  Hi grammarye,

  Yes, you're right in thinking that Firefox is trying to find the TTL value. This is new in Firefox 36 behavior and was presented as services frequently changing DNS records (such as Cloudflare) were not working properly for Firefox users.

  Firefox makes asynchronous DNS searches - which means it will make a DNS query and then proceed to perform another task instead of waiting for an answer.

  Your ISP DNS server puts in cache only TTL an area for a short time, so if it does not the current LIFE expectancy, he will interview with other DNS servers to find.

  IANAE, but probably what is happening is:

  1. Firefox tries to find the DNS record for the domain that you want to connect to
  2. Your ISP DNS server does not have the current LIFE expectancy, then connects with other DNS servers to find
  3. During this time, Firefox lingers with something else
  4. DNS server, then reconnects to give you full DNS, including the TTL check
  5. Comodo sees the packets of the DNS server and panic

  I completely agree that arbitrary ports of white list is a bad idea, but in this case, the behavior is completely harmless.

  You can want to whitelist Firefox in your Comodo Firewall, or continue to let network.dns.get - disabled ttl.

  (edited to fix broken links and add a sentence)

• I have a netbook 10 ", how do I get the newtab page displays more than 3 thumbnails?

  A few versions back (maybe mozilla 30?), the newtab page to view 9 thumbnails on my netbook 10 ". However, with recent updates, which was reduced to only 3. I know a netbook has a screen size much smaller than most of the computers and having more than 3 thumbnails (9 for example), could make for really small thumbnails on the newtab page, but I really didn't mind at the time where this was the case. If there is a way for the future updates of mozilla to always accommodate users of netbooks that would be much appreciated.

  Thank you.

  Hi, you need to zoom out to increase the number of thumbnails. Or you could try the New Tools tab add-on, which has a variety of customization possibilities. Hope that helps.

• I have stored more than 120 bookmarks and deleted the names to save space in the quick bookmark bar. Therefore, since the Bard got full, if a bookmark or folder had desciptive text next to it, the text would collapse until just the icon shows. I have

  I have stored more than 120 bookmarks and deleted the names to save space in the quick bookmark bar. Therefore, since the Bard got full, if a bookmark or folder had desciptive text next to it, the text would collapse until just the icon shows. If I hover over the icon, the test appears again. These days, I found easier to rank my favorites in folders, HOWEVER, I do not know which folder is because the text next to the icons folder remains reduced until I have pass the mouse on them. I want to customize it so that the text is fixed next to the icon or folder. How can I do this? Please help and thank you!

  Incredible bookmarks try: https://addons.mozilla.org/firefox/addon/50722

• Video is de-energized when on a call with more than one person

  Hello

  When I'm a Skype call to a video person works very well, but when there is more than one I can no longer see the other participants. There is also no button to end the call and the only way to get out of the call, it's be quiting Skype and it starts again.

  It used to work in the past and Skype was great if not sure whats going on. I'm on Win 10 64-bit with Skype version 7.25.0.106

  Someone at - it ideas?

  Your Skype is not always connected to the Cloud server.

  The correct State shall be:

  Status: NetStateConnected

  Check your hosts filein Windows, DNS/VPN/proxy settings.

  Try first to reset your Windows hosts file:

  https://support.Microsoft.com/en-us/KB/972034

• No internet connection, no dns servers.  Help, please!

  Hello

  I have an Apple Airport Extreme, I had used with internet of Cox for the past 2 years.  I recently moved and had to sign with Time Warner Cable.  I decided to buy my own modem this time, but were not able to configure my wireless network.  I can connect via my wireless hard connection ethernet (via the router) very well.  The led is green on the internet connection, but the flashing orange on the Airport Extreme.  He said that the problem is not internet connection (which is said to pass the modem which does not work) and not dns servers.  I can put in the dns servers (I've tried a few different things to include 8.8.8.8 and 8.8.8.4) who get rid of this message, but I still have the first internet connection.  My Version of Airport utility is 6.3.5, my modem is a Motorola Surfboard SB6141.

  Help, please!

  The Motorola modem will have need of a power extended down with Time Warner service in order to obtain a new valid IP address of the Server Time Warner... and... Ince you have changed providers and modem... AirPort Extreme will be reset to the factory settings and then set it up again, so that it "learn" the new settings he needs.

  If you decide you want to try our tips...

  Turning off the modem by pulling on the power cord to the back of the unit

  Unplug the co - ax cable and Ethernet cable so

  Let off for at least 30 minutes the modem... 60 would be better... more won't hurt

  While the modem is turned off... and with the AirPort Extreme on for a few minutes... Press and hold the reset button on the back of the airport for 7-8 seconds, then release and allow a minute for the airport restart to a slow status of amber light, flashes.

  Then, turn off the AirPort Extreme

  Once the modem has been turned off for at least 30 minutes, plug the co - ax cable and Ethernet from the modem into the WAN "O" on the AirPort Extreme port cable

  Turn on the modem and let it run for at least 10 minutes by itself

  Then, turn on the AirPort Extreme and let it run a few minutes

  Set up AirPort Extreme again and check to see if everything is operational

• B310 recognizing no more than 4 GB of Ram

  My B30 acknowledges no more than 4 GB of Ram, although Windows 7 Home Premium 64-bit and the motherboard maximum of 8GB.

  The link here confirms it:

  http://forums.Lenovo.com/T5/IdeaCentre-desktops-home-servers/processor-change/m-p/1070365/highlight/...

  Someone at - it a solution?

  Reinserted memory sticks and alls fine now :-)

• The use of more than 16 analog inputs of a module?

  Happy new year to everyone.

  The analog input module OR-DAQmx can only support up to 16 channels.  Now serveral DAQ cards provide more than 16 channels, including PCI - 6259M offer 32 entered analog.

  So, how do dasylab (Ver 11) support more than 16 channels in a NOR-DAQmx analog input module?

  Hello srm2003,

  (1) build your task NI MAX for your camera - 6259 - 01.png.

  (2) DASYLab: Take a first OR-DAQmx analog input module, choose the task of MAX and configure the channels 0... device 0 15... module 15 - photo 6259 - 02.png.

  (3) DASYLab: Take a second NOR-DAQmx analog input module, choose the task of MAX and configure channels 16... device 31 0... module 15 - photo 6259 - 03.png.

  (4) now you have 2 HAVE modules to manage channels 0... 15 (first) and 16... 31 (second).

  Best regards
  MHa

• Cannot print more than two pages

  Hello here

  I have a rather strange problem today: one of my users cannot print more than two pages...

  Regardless of the printer, the application or document, this specific user will receive the first two pages printed on the right, then a windows error (cannot print, the likely reason is a failure of the network, not enough memory, etc.)

  Current config is

  -User logged on the Witch of Windows 2008R2 Server Citrix XenApp 6.5 (published desktop).

  -Print server Windows 2008R2 with something like 150 shared printers

  I tried with other printers and file formats, on separate servers, it's always the same.

  Of course, everything works perfectly fine for other users...

  I'm not sure if any parameter can block printing up to two pages only, or anything else. Before you delete and recreate the user profile, as everyone has an idea?

  Grey'

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Name for name resolution? has expired after no configured DNS servers responded.

  Hello

  I just bought an Acer Aspire 571PG V5.  Whenever I do anything that involves the use of the radio I usually get the following error in the Windows system event log:

  "The name resolution for the community.acer.com name exceeded after no configured DNS servers responded".

  The address featured in changes to error messages according to what I'm trying to access the website.  In this case every 30 seconds or more.  The error ID is 1014, and the Source is 'DNS Client events'.  I'm not sure what the problem.  I have two other laptops on my home network using the same router and they are fine, I've never had a problem with them.

  Has anyone else encountered this problem?

  Kind regards

  Chris

  Hello

  Just to inform that I had this work.  Even though I had brought just the laptop today, it seems readers wireless on it was already outdated.  I downloaded readers wireless updated from the Acer support site and I don't have this particular problem.

  Kind regards

  Chris