Drag-and - déposer adds 8 hex code of the character before the title of folder in the folder

Similar Questions

• What is the hex code of the modern green color used on the cover of the Microsoft Manual of Style?

  What is the hex code of the modern green color used on the cover of the Microsoft Manual of Style, 4th edition?

  original title: Going Green...

  Hello

  The question you posted would be much better adapted to:

  http://social.msdn.Microsoft.com/forums/en-us/categories

• Drag-and - d├⌐poser gets stuck on other objects

  I have this objects (named room) that you can drag mailboxes (called target), and they get in the x and position the box there if it is correct, but if the subject is droped above another object it gets stuck, it was suppose to return to its place of origin (designated otherwise) if the hitTestObject isn't the right box.

  PS: it only seems to happen on the Witch of piece code located slot, for example: stuck piece1 exhibit2 and 3, 4, 5..., but is not stuck exhibit2 on piece1.

  Wonder if anyone can help, thanks in advance and excuse my bad English,

  Here is the code:

  import flash.events.Event;

  import flash.events.MouseEvent;

  stage.addEventListener (Event.ENTER_FRAME, EntFrame);

  function EntFrame(e:Event):void

  {

  / * Arrastar e soltar

  Torna an instance do symbol address mobile com arrastar e soltar.

  */

  piece1_mc.buttonMode = true;

  piece1_mc.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_1);

  function fl_ClickToDrag_1(event:MouseEvent):void

  {

  piece1_mc.StartDrag ();

  }

  piece1_mc.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_1);

  function fl_ReleaseToDrop_1(event:MouseEvent):void

  {

  piece1_mc.stopDrag ();

  If (target5_mc.hitTestObject (piece1_mc.tar1_mc))

  {

  piece1_mc.x = target5_mc.x;

  piece1_mc.y = target5_mc.y;

  }

  on the other

  {

  piece1_mc.x = else1.x;

  piece1_mc.y = else1.y;

  }

  }

  / * Arrastar e soltar

  Torna an instance do symbol address mobile com arrastar e soltar.

  */

  piece2_mc.buttonMode = true;

  piece2_mc.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_2);

  function fl_ClickToDrag_2(event:MouseEvent):void

  {

  piece2_mc.StartDrag ();

  }

  piece2_mc.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_2);

  function fl_ReleaseToDrop_2(event:MouseEvent):void

  {

  piece2_mc.stopDrag ();

  If (target1_mc.hitTestObject (piece2_mc.tar2_mc))

  {

  piece2_mc.x = target1_mc.x;

  piece2_mc.y = target1_mc.y;

  }

  on the other

  {

  piece2_mc.x = else2.x;

  piece2_mc.y = else2.y;

  }

  }

  / * Arrastar e soltar

  Torna an instance do symbol address mobile com arrastar e soltar.

  */

  piece3_mc.buttonMode = true;

  piece3_mc.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_3);

  function fl_ClickToDrag_3(event:MouseEvent):void

  {

  piece3_mc.StartDrag ();

  }

  piece3_mc.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_3);

  function fl_ReleaseToDrop_3(event:MouseEvent):void

  {

  piece3_mc.stopDrag ();

  If (target2_mc.hitTestObject (piece3_mc.tar3_mc))

  {

  piece3_mc.x = target2_mc.x;

  piece3_mc.y = target2_mc.y;

  }

  on the other

  {

  piece3_mc.x = else3.x;

  piece3_mc.y = else3.y;

  }

  }

  / * Arrastar e soltar

  Torna an instance do symbol address mobile com arrastar e soltar.

  */

  piece4_mc.buttonMode = true;

  piece4_mc.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_4);

  function fl_ClickToDrag_4(event:MouseEvent):void

  {

  piece4_mc.StartDrag ();

  }

  piece4_mc.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_4);

  function fl_ReleaseToDrop_4(event:MouseEvent):void

  {

  piece4_mc.stopDrag ();

  If (target4_mc.hitTestObject (piece4_mc.tar4_mc))

  {

  piece4_mc.x = target4_mc.x;

  piece4_mc.y = target4_mc.y;

  }

  on the other

  {

  piece4_mc.x = else4.x;

  piece4_mc.y = else4.y;

  }

  }

  / * Arrastar e soltar

  Torna an instance do symbol address mobile com arrastar e soltar.

  */

  piece5_mc.buttonMode = true;

  piece5_mc.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_5);

  function fl_ClickToDrag_5(event:MouseEvent):void

  {

  piece5_mc.StartDrag ();

  }

  piece5_mc.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_5);

  function fl_ReleaseToDrop_5(event:MouseEvent):void

  {

  piece5_mc.stopDrag ();

  If (target3_mc.hitTestObject (piece5_mc.tar5_mc))

  {

  piece5_mc.x = target3_mc.x;

  piece5_mc.y = target3_mc.y;

  }

  on the other

  {

  piece5_mc.x = else5.x;

  piece5_mc.y = else5.y;

  }

  }

  / * Arrastar e soltar

  Torna an instance do symbol address mobile com arrastar e soltar.

  */

  piece6_mc.buttonMode = true;

  piece6_mc.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_6);

  function fl_ClickToDrag_6(event:MouseEvent):void

  {

  piece6_mc.StartDrag ();

  }

  piece6_mc.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_6);

  function fl_ReleaseToDrop_6(event:MouseEvent):void

  {

  piece6_mc.stopDrag ();

  If (target6_mc.hitTestObject (piece6_mc.tar6_mc))

  {

  piece6_mc.x = target6_mc.x;

  piece6_mc.y = target6_mc.y;

  }

  on the other

  {

  piece6_mc.x = else6.x;

  piece6_mc.y = else6.y;

  }

  }

  Visible P2

  If (piece6_mc.x == target6_mc.x & &)

  piece5_mc.x == target3_mc.x & &

  piece4_mc.x == target4_mc.x & &

  piece3_mc.x == target2_mc.x & &

  piece2_mc.x == target1_mc.x & &

  piece1_mc.x is target5_mc.x)

  {

  P2. Visible = true;

  stage.removeEventListener (Event.ENTER_FRAME, EntFrame);

  }

  on the other

  {

  P2. Visible = false;

  }

  }

  Add the MOUSE_UP listener on stage instead of for the object that is dragged.  Add in the case where the handler for the MOUSE_DOWN event, then remove the MOUSE_UP listener where the manager what it treats.  Example:

  piece1_mc.buttonMode = true;

  piece1_mc.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_1);

  function fl_ClickToDrag_1(event:MouseEvent):void

  {

  piece1_mc.StartDrag ();

  stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_1);

  }

  function fl_ReleaseToDrop_1(event:MouseEvent):void

  {

  piece1_mc.stopDrag ();

  stage.removeEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_1);

• Drag-and - d├⌐poser disappear issue

  Hello, I do a game in which I have a little drag and drop elements they can be multiplied as much as you want. This items must stay in places and I also have a bin in the menu where if you drag them they should disappear. The problem is that I tried with several coordinates and they disappear in the scene in the moment that I am dragging them off the menu. So my question is:what could be the problem? The issue in the code?

  Thank you for taking the time to help me. This is my first game in AS3, so I'm not so familiar with the codes.

  import flash.display.Sprite;

  import flash.events.MouseEvent;

  DDB1.addEventListener (MouseEvent.MOUSE_DOWN, createDDB1);

  var _DDB1:Sprite;

  function createDDB1(evt:MouseEvent) {}

  _DDB1 = new DDB1MC();

  _DDB1.x = evt.stageX;

  _DDB1.y = evt.stageY;

  _DDB1.rotation = evt.currentTarget.rotation;

  _DDB1. Transform.ColorTransform = evt.currentTarget.transform.colorTransform

  addChild (_DDB1);

  _DDB1.StartDrag (false);

  _DDB1.addEventListener (MouseEvent.MOUSE_DOWN, dragDDB1);

  stage.addEventListener (MouseEvent.MOUSE_UP, dropDDB1);

  }

  function dragDDB1(evt:MouseEvent) {}

  evt.stopPropagation ();

  _DDB1 = evt.currentTarget as Sprite;

  _DDB1.StartDrag (false);

  stage.addEventListener (MouseEvent.MOUSE_UP, dropDDB1);

  }

  function dropDDB1(e:MouseEvent):void {}

  _DDB1.stopDrag ();

  stage.removeEventListener (MouseEvent.MOUSE_UP, dropDDB1);

  If (_DDB1.x > 700: _DDB1.x < 755 | < 240 _DDB1.y | _DDB1.y > 155) {}

  _DDB1. RemoveEventListener (MouseEvent.MOUSE_DOWN, dragDDB1);

  _DDB1.parent.removeChild (_DDB1);

  }

  _DDB1 = null;

  }

  Chances are that the problem lies in the following line:

  If (_DDB1.x > 700: _DDB1.x < 755="" ||="" _ddb1.y=""> < 240="" ||="" _ddb1.y=""> 155) {}

  Essentially, this line says if (the object is nowhere) due to the use of GOLD (|) operator.  If one of these things is true then the condition is satisfied, what becxause they overlap will always be true for at least two of them.  If this is supposed to restrict the object in an area you probably want to all of these terms to be satsified.  So in this case you must use the AND operator (and).

• PSG - MSC, WMP, Winamp, drag-and - d├⌐poser that nothing works for me to create playlists!

  Hello

  Was very happy to buy the 8 GB Sansa Fuze player and now I am totally frustrated with it.

  I have 2000 songs and I put them on the drive by drag / move (player was still in the factory settings). I had well organized my songs into folders because the ID3 tags are not all good, and I don't want to sit and edit the tags of 2000.

  Obviously the player does not function to browse the folders so I started looking in the creation of playlists and he hass nothing but frustration since then.

  I read almost all of the discussions about this and tried modes of the MTP and MSC and everything. Nothing works.

  Windows Media 11 and Winamp player always without success.

  Here's what I want to do:

  1. create playlists for each folder, I added in the 'Music' folder on the rocket, using the files on the "rocket" and not my computer being the music that I have loaded on different media (external hard drive / CD / etc).

  2 be able to navigate to these playlists and play according to what I want.

  I'm not a geek, but I'm not a starter. So all sorts of solutions welcome.

  Please help me. I really want to throw the player rather than scroll through the songs of 2000 or modify their ID3 tags.

  Feeding you the Lil Monsta first.  It's OK, but the "rocket" can have problems, find the files if they are not correctly tag tags ID3v2.3 ISO-8559-1.

  Music files display correctly when browsing the device?

  The "rocket" recognizes a variety of bit rates, as long as the files are in mp3 or wma format.

  What you need to do is to take the files you have created and edit the ID3 field data as you wish, to group the files if you want.  If the files are grouped together in folders, you can extract the files (or pull the source even if they are available on your PC) and work top with MP3Tag, available for free download.

  I have not tried, but it may be possible to change the files on the device, and then save them to the "rocket" and delete the mtable.sys file in the root directory before you leave or disconnect the "rocket". What I hope will happen, is that the original ID3 tag database will be rebuilt using your tags edited.

  I mention this workaround solution, since you have already loaded 2000 files on the device.

  The sticky issue is the 'default', used when you load your music.  MTP mode out-of-the-box, by default the "rocket" at less than your operating system of the Sansa queued data to open a session of MSC mode communication, based on automatic detection.

  The probability is higher that, since you mention WiMP11, PSG is the mode of choice.  The file mtable.sys in the root directory is not seen in MTP mode.

  Have you tried to synchronize your rocket with WiMP11?  The synchronization process can work in the opposite direction, pulling songs from the device in the library of your Media Player.  Once there, you can use the "Advanced" tag editor to correct tags, but MP3Tag can work on whole batches of similar files for you, or it may even take your entire collection of, say, ID3v2 tags and rewrite as 2.3 with the correct character set.

  Chicken can allow you to generate playlists on your PC and send the .pla playlist file to your Sansa. (No, the files are NOT duplicated in a teeny .pla file, here is only a list of files!)

  Finally, when you're connected in MTP mode, navigate to the music folder.  You can generate playlists at will, especially when they are already on the device using Windows Explorer in MTP mode. Choose a desired file, right click to create Playlist.  Rename this playlist as you want and open it.  Now, drag and drop all your titles in this list box.  Note Please!  You're not actually dragging the files in the list, just the TITLES go from there - how cool is that!

  Two towers with lots of files: If you have a list, hold down the [SHIFT] key will allow you to extract all the files between the two clicks as a group, or now the [CTRL] will allow you to consolidate each individual file clicked until the release of [ctrl key].  Then, drag one of the files selected to the playlist, and all selected files will follow.

  I prefer to drag these new playlists in playlist file, which makes them easier to find later, compared to the research of the multitude of files in the music folder.

  Bob

• Files lost after file drag-and - d├⌐poser.

  Several times, I tried to drag and drop a folder, including its contents, to another folder of collection. Levels were usually jpegs ranging from a few hundred. After the drag and drop I hopened the file. He had only a short text telling him: this folder is empty. How to retrieve the summary?

  I discovered today that I tried to moved files from one partition to another. The destination partition became full and window has found a different place on the source partition to move the rest of the files. Them there.

  Thanks for the tips

• Drag-and - d├⌐poser has stopped working on Windows 7.

  There seems to be many possible solutions here, but none seems to work for me. Why isn't someone from Microsoft tell us just what the problem - officially - instead of having to fix it ourselves!

  Hi Richard,

  Learn the steps of Vaseem Ahmed http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/drag-and-drop-has-stopped-working-on-my-desk-top/68d886c2-028d-48e9-883d-59d101e30304

  It will be useful.

• Drag-and - d├⌐poser gray?

  Hello

  For some reason the Drag and Drop option is grayed out. This could be because I work with the Responsive Design format in Captivate 8?

  Thank you

  In the first version of 8 slipped & was not possible, that it's in the second version. You can check the exact version number?

• Is drag-and - d├⌐poser supported by TreeItem?

  Hello
  
  I am currently working with a JavaFx-2 TreeView representing a file system.
  
  I want to activate [drag and drop | http://docs.oracle.com/javafx/2/drag_drop/jfxpub-drag_drop.htm] to move operations, but it looks like TreeItem does not include slide event listeners. I was able to implement drag and drop on the TreeView encompassing, but it does not work for the sub-items.
  
  Am I missing something, or are drag and drop of events not taken in charge for the treeitem elements yet?
  
  Related SO question: http://stackoverflow.com/questions/11242847/is-drag-and-drop-supported-by-treeitem

  You must implement drag on drop on the TreeCell.

  Write a CellFactory like this:

  TreeView treeView = new TreeView();
          treeView.setCellFactory(new Callback, TreeCell>() {
              @Override
              public TreeCell call(TreeView stringTreeView) {
                  TreeCell treeCell = new TreeCell() {
                      protected void updateItem(String item, boolean empty) {
                          super.updateItem(item, empty);
                          if (item != null) {
                              setText(item);
                          }
                      }
                  };
  
                  treeCell.setOnDragDetected(new EventHandler() {
                      @Override
                      public void handle(MouseEvent mouseEvent) {
  
                      }
                  });
  
                  return treeCell;
              }
          });
  

• Drag-and - d├⌐poser accept actions does not not in HTML5

  Hi all

  I'm testing features of captivate on mobile devices, more specifically iPads.

  I have a very simple drag and drop interaction implemented. It is a moving target, and 4 drag items on it.

  Drop targets accept methods are defined to hide items to move once they are dropped on the target. This works fine in preview mode, but carry no HTML5. I've included a photo to show the actions I put in place that do not work.

  Is there a way for them to work in HTML5?

  

  See you soon

  Lewis Carey

  Hello

  This is a bug present in HTML5 publish. As a can you please try to change the "opacity" to "0" and see that it resolves the problem.

  1. Select the drop target.

  2. in the control panel to Drag and Drop, Drop target section, change the value of 'Opacity' to '0'.

  3 publish the project.

  Let us know whether or not it solves the problem.

  Thank you

  VERALINE Sukumaran.

• Download "Importing Options" when you perform a drag-and - d├⌐poser place?

  Is there a way to get the "Importing Options" prompt when you place an element in InDesign by 'Drag and Drop '?

  

  I think that if you use the bridge instead of the Finder, and you hold the SHIFT key while selecting the place in InDesign, you also get the import options. Not as simple as drag and drop, but easier to find your files in the Place dialog box, perhaps.

• How drag and drop a picture into a shape of the object?

  On my old Lion system that I used to be able to drag a picture from iphoto in the shape of the object open in Pages.  I can't be able to do more.  The system changed?  I tried to use Inspector (under help), but it won't let me access the file of the photo on the right.

  You can drag and drop a picture in a form in v4.3 Pages ' 09, but this can be done in any version of v5 Pages. Quite different applications, as well as more recent Pages has lost about 100 features that were in its antecedent.

  Check if you have Pages ' 09 v4.3 in your Applications: iWork ' 09 file. If so, use it.

  Pages v5 requires that you select a shape, and then on the Image tab in the right panel, you choose Image, scale to fill fill, and then select your image for the background. You cannot select this image from the inside, but you can add text to the form that will appear on your image.

• How to add google remarketing code at the bottom of all pages before the closing &lt; / body &gt; tag in muse adobe

  I try to add the google remarketing code JUST before the < / body > tag to end on all my pages... they require would be at the exact spot. I tried it added via insert html and that place in the footer, but that did not work. I also tried 'page properties' 'metadata' html for the head, and that's not good either. I could go through ftp to each html page and add the code myself (125 pages) but then the next time I change and upload my site again he will crush it and is not a solution. Any help would be appreciated.

  It's googles exact statement:

  1. Place the code at the bottom of all the pages on your website, before closing </body> tag. If your site uses a common file for a footer, you can place the code snippet here rather than on each page of your Web site.

  Hi Austin,.

  Please refer to the following thread: How do I embed a Google's Remarketing tag closing "<\body> tag to all pages of Muse? "

  Kind regards

  Akshay

• How to add a tracking code after the opening &lt; body &gt; tag on a Master Page?

  I would use Google tag on my Adobe Muse site manager.  I do not see how to add a snippet of code in the Head of a page section but Manager tags Google recommends to apply the code after the body opening < body > tag of each page due to its use of iframes.   Can someone tell me how to proceed?

  Thank you

  Hello

  Could you please check this thread,

  Re: Errors tag Google in Adobe Muse Manager

• Drag and .wav file to automatically start playback of the slide 1 of 9 of Captivate

  Hello

  I use 9 Captivate and do not know how to get the first slide file and .wav to start to play automatically at the same time.  Currently, the file .wav (narrative attached to slide) play, but I have to click the play button on the slide started.  Any help would be greatly appreciated.  I have "Auto Pla" is selected in the preferences and 'Skin' checked marked "Outsource resources" - also in the preferences.

  Kelvin

  Of course! I should immediately ask for a screenshot of the timeline, slapping my head.

  You have a form button 'SmarShape_101' (Please label items) which is a break from the slide to 1.5secs. I suspect that it's a next button, and I can give you a tip? Why don't you use not two objects: text caption + form rather than type the text IN the form? To solve the problem of your question: go into control panel Timing and fixed the break to 30 seconds (almost the end of your audio clip). Also there is no reason at all to do this slide so long. Once the clip is done, nothing will happen. Also, be sure to fix the chronology of the SmartShape_101 and the Text_Caption_WAW... at the end of the chronology of the slide! If you extend the chronology of the slide, the entire chronology of these two objects will move to the right endpoint is attached and duration is retained. It is best to use CTRL-E to extend a timetable until the end of the slide. In this case, which extends from the chronology of the slide extend also the timing of these two objects.