drag over the action does not work

Similar Questions

• Presentation of the action does not work during the Conference

  Hello world

  Here's the background
  -CUCM 10.5
  -Telepresence conductor XC4.1
  -Telepresence Server (VM) 4.2
  -Endpoint: MX300

  I have problem when sharing a presentation at the Conference meeting.
  It doesn't seem to work.
  However, the part of presentation works with success during a normal 2-way call

  I read an article by cisco,
  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

  A field is related to the function of presentation,

  Allow the content
  (Available when the preference of Service has a type of telepresence MCU Conferencing Bridge)
  Whether or not, participants will be able to send video content, such as a presentation.

  Yes: one lane will be reserved on each cascade TelePresence MCU and TelePresence MCU primary specifically for content. Use this setting to enabled WebEx conferences.

  No: the participants will not be able to send content, regardless of the number of ports available on the MCU. Content can always be displayed, since some end points provide content in their main video channel.

  The default value is Yes.

  Need MCU allow sharing feature? or I missed something?

  Thanks in advance

  Sam

  Allow that content is available only when the conference bridge is an MCU and does not apply to a server of telepresence.  The only thing you need to do within the Orchestra, is ensure that "content quality" within the model of the Conference is not set to 'Off', see the top of pg 61 of the guide that you have linked to your post.  Also, make sure you have enabled on the SIP Trunk to driver in CUCM BFCP.

• I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

  It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

  You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.

• Highlight the line does not work after dynamic refresh

  Hello

  
  

  Request Express 4.2.1.00.08

  
  

  Hoping someone can help with this. I have a report (list of loans for a person) who gets refreshed dynamically when the account number is changed. The loan id column is a link when you click fires a dynamic action that uses JavaScript to highlight the current line

  $('.highlight-row').removeClass ('point culminating-row');

  $(this.triggeringElement) .parent () .parent () .children () .addClass ('point culminating-row');

  It works fine first time around, but if the loans area is updated the javascript does not work anymore and the current line is not highlighted.

  Thank you

  
  

  Neal
  

  
  

  
  

  Hello

  What is the scope of the event?

  It must be dynamic.

  You can create a new DA the event which is:

  After Refresh.

  Selection type: report

• Game audio action does not work in Captivate 7

  Hello

  On the first slide in my class, I added a "quick start" guide It consists of a series of legends that contains text. In each legend, there is a text link "Continue" triggering a tip action to hide the current legend / show the following. This works perfectly.

  Now, I tried to reach audio at each step of the guide. I added a "audio playback" action after stocks show/hide for the first step. No audio not playing. When I changed the audio of the game to be the first action in the script - the script did not work at all. When I changed it between the show and the skin, leather working and show does not. What I gather from this is that play the audio does not work and also stops all this.

  Any advice?

  Thank you

  Just checked, created an action shared with almost exactly the same commands, but grouped together all the containers in text in a group Gr_TC

  Hide:

  

  It worked perfectly. You don't see a label, because it is a common action, to which I just filled in some settings. Attached to three buttons, had 3 containers of text and 3 different audio clips.

  The audio clip plays when it is used in another way? The only difference seems to be that you have a clip of VO and I used one of the sounds included with Captivate.

  Another way would be to fix the audio on the text as audio of the object container. Once you view the text, audio will play, when you hide the text to stop. It was the way to go before COP6:

  http://blog.lilybiri.com/playtime-with-audio-and-widgets

  Lilybiri

• How can I set at the point when the [key does not work because I have a German keyboard?

  Hi, I'm new to CS6 and worked through the book of Adobe After Effects. Some of the shortcuts do not work for me, probably because I use a German keyboard. In Chapter 11, I have problems because I need to select a layer, go to a specific time and then set to the point, but the [key does not work. Does anyone know a German equivalent or another way to set the point to? Otherwise, if I look at the colored bar in the timeline representing the layer that I want to put a point, can I get the same effect by dragging the edge of the colored bar until I reached the time limit? Or that fails to preserve the relationship of all images existing keys, etc. that I have implemented for a layer in a way that the [key would be? Grateful for any advice.

  Shift + o/a, o/a and so on. Also kann man mit Sttrg + shift + D die ebony einfach und den Teil parts, den man nicht parish, löschen. Ansonsten einfach evil die die Shortcuts.txt Datei deepening und oder das KeyEd Up Script dafur use squad.

  Mylenium

• iPhone 5: objective of the camera does not work after update iOS 10

  Hello everyone.

  I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

  I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

  The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

  I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

  PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

  Hello

  I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

  After this answer please.

  Thank you Will

• Fast forward on the videos does not work on tvos 10

  Hello

  After updating to the latest tvos, 10, fast forward on the videos does not work. I can only fast forward when I press on the right place on the pavement and fast forward 10 seconds in time.

  Someone else has the same problem? Is this a bug in update?

  Hello. It seems to work as described here https://help.apple.com/appletv/#/atvb7944597f press next to move to 10 sec, press and hold to fast forward. They have it changed again?

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• I can't select or copy text on Firefox for Android 26.0.1 (device: Samsung Galaxy Note 2) OS: Android 4.3. Long press on the text does not work. )

  Can't select or copy text on Firefox for Android 26.0.1.
  Device: Samsung Galaxy 2 Note.
  OS: Android 4.3.
  Long press on the text does not work.

  I would ask someone to check that...

  I'm glad to hear that your problem has been resolved by using the beta version.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

  We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  I hope this helps!

  Curtis

• Yahoo speaker icon Chinese big5 dictionary web to pronounce the Word does not work on firefox 26,27.

  http://tw.dictionary.search.Yahoo.com/search;_ylt=A3eg.nXHREBSxRUAzBh7rolQ?p=test & fr = SFP
  the speaker icon of web for the Word does not work on firefox 26,27. It works on firefox 24,25.

  Hello mizuc, thanks for reporting that - I can reproduce the problem and get an error in the web console:

  Media resource http://___.mp3 could not be decoded.
  

  Edit: I have filed bug 919572 for this question

• no service to customer without having to pay when the product does not work?

  no service to customer without having to pay when the product does not work?

  You will need to tell us more of the history for anyone to be able to give advice. The WHOLE story would be great!

• Shortcuts mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1

  Shortcut of mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1, it worked on version 9.0.1.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

  Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  Can be caused by an add-on to the AVG.

  When find you what is causing that, please let us know. It might help others who have this problem.