Drag-to-disc 32 Vista

Similar Questions

• Equium L40: Replaced HDD - disc need vista Home premium

  I had to replace my hard drive in my Toshiba Equium L40 and need to install windows vista again I have my code of product vista Home premium but no installation disc.

  Can someone help

  Hello

  Sorry do you need exactly? Do you need disc recovery Toshiba or d you must have Microsoft Vista disk?

  The serial key you found at the bottom of the unit belongs to the preinstalled Windows operating system and will NOT work by using different Windows disks.

  You have two options;
  Either you buy the here Toshiba Recovery disk:
  https://backupmedia.Toshiba.EU/landing.aspx

  Or you buy the original disc of Microsoft Vista and will use the drivers provided by page European driver Toshiba

  There is no other solution.

• Satellite Pro L300 - can I use the recovery disc back Vista?

  On my computer I am dual boot Windows 7 and Windows Vista.
  Could get rid of Vista and then later could use the recoevery drive to recover vista?

  PS I know it erases the entire hard drive

  Hello

  Of course, you can use the Toshiba Recovery disk to go back to Vista. It contains a picture of the factory settings and this means that the Vista preinstalled with all the drivers and tools.

  But note that the recovery disc erase the drive HARD integer for you should backup your data first before using the recovery disk.

  Good bye

• Satellite P300 - - what are product recovery discs contains Vista?

  I want to reformat my laptop, it's a Satellite P300... many things does not work more IE: System Restore and corrupt c drive

  (1) would be to reformat my laptop to fix those problems?

  (2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and 64-bit windows vista ulimate said.

  Is that mean they contain vista? (vista came pre installed

  (3) should I make a copy of the PRODUCT ID series vista on my system menu screen

  (4) how would these discs...

  I you thankful if you could help, its a super computer

  Conduct research on how to operate the discs, just want to make sure that they contain vista

  > 1) would be reformatting my laptop fix these problems?
  Probably yes

  (> 2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and said windows vista ultimate 64-bit.
  As far as I know that P300 was equipped with HARD drive recovery and Vista 32 bit was preinstalled. There should be an option that allows to recover the laptop using the recovery of HARD drive option. Press F8 when the laptop starts up. Then choose fix my computer and start HARD drive recovery.
  This should set the machine to factory settings. Finally, you can create a recovery disk using the Toshiba recovery disc Creator called preinstalled software.

  (> 3) should I make a copy of the PRODUCT ID series vista on my system menu screen
  You can do this, but as far as I know the Vista on the Toshiba Recovery disk is already enabled and you don t need the series keys.

  (> 4) how would these discs...
  Usually you have to boot from that disk

  PS; For more details you should read the user manual and must read the discussions in this forum!

• How do I create using recovery disc installed Vista - Satellite L300-190

  Can u please help me.
  If I had the factory installed default windows vista, then how to create the recovery disk and can also create usb recovery drive, while I was able to boot my system with usb?

  And also if I m even have another model of machine, then I can use the recovery disk in the other machine with the same model and OS. ???
  as for now, I have two same machines toshiba Satellite L300-190 model.

  Waiting for your response.

  I think that this has been discussed much time here in the forum.

  You can create the recovery disk using the Toshiba recovery disc creator!
  This tool must be preinstalled on your laptop if the laptop was equipped with HARD drive recovery option.

  You can also try to restore the laptop using the recovery of HARD drive option.
  You must press the F8 key during switching on laptop and I then have to choose the option called fix my computer. Then new window should open, and you could choose the Toshiba recovery.

  If you cannot use the two procedures (disk recovery HARD and Toshibas recovery disk) then you can order the new CD from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  All that s

• Tecra M4 - DVD player does not recognize discs in Vista

  Hello

  After the installation of Vista my dvd player does not recognize discs!
  No update XP! It was a clean install of Vista.

  I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

  I tried the XP disk it works fine and recognizes all.
  Drivers are installed correctly no problem in Device Manager is invited.

  So I have no idea how to run it, seems to be a Vista problem

  Could someone help me? I am really frustrated to this topic

  Thanks for your help

  Maybe this helps:

  -Remove the drive from Device Manager CD/DVD.
  -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  But what happens exactly? Which disks are not recognized?

• Is it possible to repair an installation of sp2 with an installation disc of vista (without service pack)

  I have Windows Vista Ultimate SP2 installed on the drive. But I have an original DVD of Windows Vista (without service pack). Can I run the repair utility on this disc installation DVD? Will this work?

  Hello

  Loy is not going.

  You will need to uninstall the Service Pack on the operating system that is installed to do a repair installation upgrade with this Microsoft Vista DVD which has no Service Packs on it.

  The Service Pack on the DVD must be at least the same as the operating system Service Pack level installed to make it work.

  How to perform a repair for Vista Installation»

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Original discs Windows Vista OS lost or missing.

  I have a laptop that crashed hard drive.  I bought a new hard drive, but I don't have the original disc of Windows Vista OS.  I don't have the original product key with the laptop.  Y at - it somewhere I can download the software for free and use my original product key?

  The laptop is a series of ML6732 gateway with a 360 GB HDD.  The product key is on the laptop.

  Hello

  You can communicate with the gateway and ask them to send you a set of Vista recovery disks.

  They do it for a small fee.

  http://support.gateway.com/us/en/support/default.aspx

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• CD/DVD drive read only not the discs in Vista

  My CD/DVD read more records. I put in a disc and it does not detect either he (it's as if I was never to put a), or it takes forever to load. Also, I can't read game discs so I can't play my games. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My dvd player reads a pre-recorded disc with vista. __

  It is an Optiarc dvd rw AD-7560 s on a sony

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  If the DVD or the DVD? If all the drive might have a problem.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  If the burn is a burning question at slower speeds, or by using the master could help. A
  CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Is there a way to get the replacement only discs Windows Vista Home Premium?

  I got systym failure and my hard drive fried. I had windows Vista installed in it and the disks were stolen. I have the sticker on my tour that shows the numbers and everything, but I don't have more discs... is there a way I can get records of replacement for her without having to pay the nose completely re - buy all this?

  If Windows Vista was preinstalled on your computer, contact the manufacturer of your computer for a replacement drive. This article in the Microsoft Knowledge Base has the details:How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Dell studio 15 computer laptop dvd drive don't read do not discs in Vista

  IAM using dell studio 15 laptop with vista 32 bit os.my dvd player is not reading any disc

  Pleas give me the solution

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Need to copy the files from old XP disc in Vista by Doc

  Have the old OS XP disc I need to get the MDC in Vista64.  Drive appears in my computer on Vista and XP security will not read copy the required files to the vista system.

  Hard drive XP started under Vista64 OS, need to copy files from old drive XP in Vista by Doc security on files XP stopped, how do I solve the problem__

  Appropriate files on the old hard drive:

  Check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click on OK

  MS - MVP - Elephant Boy computers - don't panic!

• copy of a dvd/data disc using vista

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  ==================================
  Here's an easy way to create a copy of your DVD.

  The following freeware can create an ISO Image
  your DVD and then burn it to a blank dvd.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to display the progress of disc in vista Defragmenter, as you can do in xp?

  There must be a way to do this.

  Vista doesn't have a graphic display just like XP.

  Vista disk defrag works quietly in the background.

  You need 3rd party Software for what you want:

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/reviews/IObit-SmartDefrag/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

  http://www.SnapFiles.com/reviews/UltraDefrag/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option. The program supports full defragmentation and defragmentation of space (compression) and you can include/exclude files or folders based on their name or their size. Other features include HTML reports and the boot time defragmentation. (Does not work on Vista x 64)

  http://www.SnapFiles.com/reviews/Diskeeper_Home/Diskeeper.html

  Diskeeper Home is a fully automatic defrgmentation engine that replaces the standard Windows Defragmenter. Built-in defragmenters are manual resource only, consuming and require full administrator privileges to operate. Execution of Diskeeper is like hiring an expert to monitor constantly and to maintain the maximum performance of your systems. Diskeeper is the fastest defrag engine ever built. National Software Testing Lab (NSTL) proven 300 to 500% faster and much more thorough than the built-in defragmenters. The program includes a unique feature set it and forget it with smart planning, which, once set, works invisibly and automatically in the background. In addition, the Frag Guard feature to avoid fragmentation in your most critical system files. Additional features include starting defrag, priority settings and the ability to defragment multiple disks simultaneously and automatically while the system is in use.

  See you soon. Mick Murphy - Microsoft partner