Drawer component (sidebar)

Similar Questions

• Help! Is - it still be possible?

  I'm working on a project that requires an elaborate Flash interactivity. I would like to get your opinion on the question of if it will work, if Flash and Captivate are the right tools, etc...
  
  We want to train users on how to fill out a medical form. It takes users to circle or put slashes through the words, 'write' (type) on the lines and 'draw' areas of shadow on a diagram. (I have the drawing component in Flash)
  All this is done in harmony for an audio "interview", so she'll stop intermittently, then continue. Feedback should be given after each user interactivity.
  
  There are 3 levels of learning for the course: ShowMe (Flash movie, no interactivity, demo and the text "slides), Coach Me(interactivity, feedback, marking displayed, not sent to LMS) and test Me (even that Coach Me, but scoring sent to LMS)
  OK, another is on the wish list: narrative dynamic text for the 3 levels of learning and streaming video.
  
  I'm crazy to think that? I explored Captivate, Flash and Articulate until... each have different possibilities, but integration to get everything feels impossible.
  
  Please guide me, I am on time very short and work on mine. It's driving me to lose!
  TIA,
  
  Debra C
  

  Larry, thanks for your indispensable professional contribution! (I used it in my defense)

  We decided to keep short, but reduce the project considerably. Even the integration of Flash, but non- interactive Flash.

  Our 'Show Me' will be a 'film' / demo created in Flash (my specialty) and a 'Test Me' with Captivate out-of-the-box types of questions (multiple choice, likert, true/false, etc.). Culatello, the "Coach Me" us and crazy Flash interactivity. So, all in all, a solution to my problem.

  I guarantee that I'll post more Captivate questions on the forums, but all are likely to be in the areas of reality. =)
  Thanks again,

  Deb

• Start Thunderbird pop - up said "could not initialize the security component.

  Hello
  Thunderbird started the following window pops up suddenly. No problem during the morning session.
  Draw the attention of
  "Could not initialize the component of application security.
  The most likely cause is problems with the profile of your application directory.
  Please check that this directory has no read/writerestrictions. ETC.»
  I checked in the T / B profile folder.
  'Certificate Mgr' window is empty (no ads).
  So is the window "Mgr Device.
  I couldn't find the mentioned restriction "read/write".

  http://KB.mozillazine.org/Could_not_initialize_the_browser_security_component

• Drawing of smooth circles in labview

  Hello

  I use the VI 'Draw circle of RADIUS' draw a chart areas within a picture box. All its fine, except that the edges of the circle are not exactly smooth (see attached photo).

  I tried searching on the net but could not find anything very useful.

  Any ideas on how to make the edges nice and smooth?

  Hello
  The circle is not smooth as no anti-aliasing is done with the image drawing screw to make it appear smooth, you will need to implement an anti-aliasing algorithm in the image control. This isn't something I've ever seen do. You can download MSChart from Microsoft, it's just a free .NET component and code that you can download. Thoric has done a very good example here https://decibel.ni.com/content/docs/DOC-9946 you could start by drawing a pie chart for you.

  Mike

• I get "access denied" when you try to add the component 4543BD

  I get "access denied" when you try to add the 4543BD to my diagram. This component has been added since a previous version. I use Multisim version 12.0.0 student edition.

  Hi Diarra,

  I checked my database and the 4543 isn't in the student edition. If you open a drawing that was created in a version more recent as the education edition and copied the part to your database, when you place this part, you will get the access denied message.

  Attached is a diagram with the part, you can open it and build you circuit around it.

• Specifying a custom component properties

  Hi all

  I use Multisim/Ultiboard 11.0 and would like to ask the next question. When I create a custom in Ultiboard component, I can attribute the imprint newly created for us Let's say a capacitor. The problem is that, in the spreadsheet, view in the field "Manufacturer" of Multisim indicates Ultiboard. I was wondering if it is possible to change this, Multisim or when you create a custom in Ultiboard.

  Thank you.

  Kind regards

  Viktar

  Hi Viktar,

  It's pretty easy to do. Try this:

  1. In Multisim, click Tools > Database > Database Manager
  2. Search for the component that you want to add the footprint of
  3. Click on change
  4. Click the tab of the print
  5. Select the mark that you want to change
  6. Click on change
  7. Specify a new manufacturer of print here
  8. Save the changes to the component and fingerprint
  9. Remember to update the component on your drawing.

  Hope that helps.

• reads message ' Windows sidebar operated by the system administrator.

  Lost component and all the gadgets.  How to reinstall?  Message appears: "Windows Sidebar is managed by the system administrator.  I AM the administrator

  But how do you mean this?   Maddening!

  Hello

  Remember to make changes on the computer before this problem?

  Follow these methods.

  
  Method 1: I suggest you follow this article. This article helps you to solve the problem and make Windows Sidebar reappear.
  How to restore the sidebar of Windows?
  http://support.Microsoft.com/kb/963010

  Method 2: if that doesn't help, you can follow these steps.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, follow this link
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  a. click Startand then click all programs.

  b. click Accessoriesand then click run.

  c. type regeditand then click OK.

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  d. identify the and click the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Windows

  e. in the pane, click with the right button on TurnOffSidebar and click Remove. Click Yes to confirm delete.

  f. now navigate to the following registry key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Windows

  g. in the pane, click with the right button on TurnOffSidebar and click Remove. Click Yes to confirm delete.

  h. close the registry, and then restart the computer. Check whether the problem is resolved.

• I lost the sidebar with clock, calendar and puzzle on it. How can I get that back

  I got the sidebar with the calendar and clock and a puzzle on this subject. I moved the computer and inadvertently press the button to hide? I don't remember how I did these on my screen can you help me?

  I got the sidebar with the calendar and clock and a puzzle on this subject. I moved the computer and inadvertently press the button to hide? I don't remember how I did these on my screen can you help me?

  You mean component Windows and Gadgets.  (<-- that="" is="" a="" link,="" click="" on="">

• Sharing multimedia files has been disabled because a windows required setting or a component has changed.

  Earlier today, I was a game on my Xbox 360 and decided I want to play music in the background, using the guide of 360.

  I went to "Select Music", searched my PC in the devices menu, and it does not appear. This has happened before, I just figured out my PC was in place. I went to the 360 Dashboard and looked back to the server. He has not yet shown upward.

  I went to Windows Media Player on the PC that I share the media selected in the dropdown under library and went to share multimedia files. (Here's where it gets confusing...)

  He gave me a message saying "sharing multimedia files has been disabled because a Windows setting required or a component has been changed." I hit very well, and I went back to the sharing of multimedia files. Now, I had the option to check the box "share my media". I checked, hit OK, made sure everything was good to go. The unit has not yet appear on the dashboard. I went back to the sharing of multimedia files. To my surprise, I received always «sharing multimedia files has been disabled...» »

  This is the part of the confusion: if I turn on media sharing, Windows it cuts back.

  I tried all the solutions online that I could find, which includes deleting the files in the Windows Media AppData\Microsoft folder. Register a dll to the administrator. Ensuring that you have the "Windows Media" folder. All take very well.

  Basically I narrowed down it to: nothing works.

  Each person could fix their problem by using the solutions proposed in other posts on other forums/blogs. Mine is recurring. In addition, my media is on a separate internal hard drive, which I added to the Windows Media Player files to add multimedia elements. I went and deleted from here. I still have the problem of sharing.

  All said Microsoft is to restore your computer to a previous state. It's not really useful. I don't want to go just restore. I want to fix it where. In addition: restoration would not help, I don't know how long this problem exists, but I have not known about it.

  
  

  -Very well, after a fresh reformat the hard drive and re-installing Windows, I finally reduced the problem.

  I have not had ANY problems with the computer... Until I installed my Adobe CS5 Master Collection again.

  It turns out that the part of the Adobe Acrobat 9 Pro Extended software called Adobe Presenter 7 causes the sharing to go haywire.

  I deleted Adobe Presenter 7, and just like that, sharing has increased again.

  In addition, Adobe Acrobat 9 was causing my sidebar to go haywire, so I advanced and which takes off as well.

  Have not had a problem since.

• sidebar on the desktop are not displayed images of only a red cross

  sidebar on the desktop are not displayed images of only a red cross

  Take a look at the following:

  Sidebar will not run on start up
  http://www.Winhelponline.com/blog/fix-Windows-Sidebar-does-not-start/

  
  Component cannot start Windows Vista

  http://www.Vistax64.com/tutorials/117192-Windows-Sidebar-will-not-start-Vista.html

  Sidebar Gadget not working not properly
  Note: look for responses from the veebull
  and president of the DNA
  http://social.technet.Microsoft.com/forums/en/itprovistadesktopui/thread/5d734cdb-757f-4801-8f28-3cca36ccf7ba

  How can I restore windows sidebar
  http://support.Microsoft.com/?kbid=963010

  How to fix broken sidebar
  http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-repair-your-crashed-or-hanging-Vista-Sidebar/

  From: Daniel Martin
  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/802e24fe-4DD3-4EE3-b2b5-5eba88595598

• Vista Sidebar uses 56% of the CPU.

  I have 4 GB of RAM and Vista sidebar is with 56% of it... Other problems: clock is stuck. Gadgets calendar & different weather, have purple underscore
  Does anyone have a simple solution to these problems

  Yes, there is a simple solution. Download autoruns from http://www.sysinternals.com. Run it, and then in the menu options select "Hide Microsoft and entered windows."

  Disable all third part of each tab entries except the tab drivers ensure that you clear not all critical components. Disable items that are more specifically under internet explore and Explorer tab.

  Reboot and see if the performance of the system and looks best. Also download process explore http://www.sysinternals.com

  (1) Download Process explore http://www.sysinternals.com
  (2) download and install http://www.microsoft.com/whdc/devtools/debugging/installx86.Mspx of windows debugging tools
  (3) create a c:\symbols folder
  (4) run the Explorer process and then in the menu options select "configure symbols." Form dbghelp.dll path specify the location where you installed the debugging tools.

  Specify the following options for the path of the symbols
  SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  (5) select the process that shows the high utilization of the processor. Right-click on it, and then click Properties
  6) go in the discussions tab and sort colum CPU in order descending, so that funtion name that consumes more of the processor is listed in the upper part.
  (7) the address colum that the dll and function which will tell you which component on your CPU and what function he is causing the high CPU usage
  (8) get the supplier to get the fixed number.

  Pretty Simple.

  Hope this helps you. Have a great day! Thank you and best regards Gurpreet Singh

• Unhandled exception has occurred in a component in your application.

  Hello, I have a user get the following error on a computer.  The computer uses windows 7, .net framework 4.5.1 and happens once the user has all its programmes of work to the top.  Programs include: as400 (3 sessions), teamviewer (background) IE, Outlook, Lync, pipkins, cisco any connection (user is a remote user) symantic endpoint protection and for sure.

  I repaired and then reinstalled the .net framework, and the problem persists.  I also reinstalled teamviewer to see if it would not be on the exception text afterwords, but it has always been.  After the error occurs, the user will experience the gel in its various programs, usually in the as400, but not always and sometimes the entire computer freezes requiring a hard reboot. The only things I can think to the left to try are a reconstruction of profile (even though she has a new profile on the pc) or replacing and he places, which are particularly attractive if avoidable.

  Full of the error:

  Unhandled exception has occurred in a component in your application.  If you click on continue, the application will ignore this error and attempt to continue.

  The attempted operation failed.  An object is not found.

  Details:

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.Runtime.InteropServices.COMException (0x8004010F): the attempted operation failed.  An object is not found.
  to Microsoft.Office.Interop.Outlook.NameSpaceClass.GetDefaultFolder (OlDefaultFolders FolderType)
  at TeamViewerMeetingAddIn.AddIn.DoStartup)
  at TeamViewerMeetingAddIn.AddIn.CheckOnlineTimer (Object sender, EventArgs e)
  to System.Windows.Forms.Timer.OnTick (ByVal e As EventArgs)
  at System.Windows.Forms.Timer.TimerNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
  ----------------------------------------
  ManagedAggregator
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) /TeamViewer/outlook/ManagedAggregator.DLL
  ----------------------------------------
  TeamViewerMeetingAddIn
  Assembly version: 10.0.47484.0
  Win32 version: 10.0.47484.0
  CodeBase: file:///C:/Program%20Files%20(x86) /TeamViewer/outlook/TeamViewerMeetingAddIn.DLL
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  Microsoft.Office.Interop.Outlook
  Assembly version: 14.0.0.0
  Win32 version: 14.0.4760.1000
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.Office.Interop.Outlook/14.0.0.0__71e9bce111e9429c/Microsoft.Office.Interop.Outlook.dll
  ----------------------------------------
  Office
  Assembly version: 15.0.0.0
  Win32 version: 15.0.4420.1017
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/office/15.0.0.0__71e9bce111e9429c/office.dll
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL

  Hello

  Check this out http://answers.microsoft.com/en-us/windows/forum/windows_10-other_settings/microsoftnet-framework-i-believe-dealing-with/506de8e2-8068-47c8-b4c2-2f5c53f15af8?auth=1, looks like TeamViewer 10 causes this problem.

• How to draw and the positioning of images in FieldManager using the method object?

  How can I add and the positioning of my images in the position desired in FieldManagers?

  I need to add more than 2 fields (HorizontalFieldManager/VerticleFieldManager) in my application and I draw an image using the method of painting ovverided.

  NOTE: The image will be established if I do not use mainScreen.add (SeparatorField ()) or mainScreen.add (hori2), see below.

  If I use mainScreen.add (mainScreen.add (hori2) SeparatorField ())... n then the horizontalFieldManger won't be empty, drawn in the output screen.

  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.system.*;
  
  public class BackgroundImage extends UiApplication
  {
      private Bitmap backgroundBitmap;
      private Bitmap fieldBitmap;
  
      int width, height;
  
      public static void main(String[] args)
      {
              BackgroundImage theApp = new BackgroundImage();
              theApp.enterEventDispatcher();
      }
  
      HorizontalFieldManager hori2;
  
      public BackgroundImage()
      {
          //The background image.
          backgroundBitmap = Bitmap.getBitmapResource("jalan_logo.png");
  
          MainScreen mainScreen = new MainScreen();
  
          hori2 = new HorizontalFieldManager();
  
          HorizontalFieldManager horizontalFieldManager = new HorizontalFieldManager(HorizontalFieldManager.USE_ALL_WIDTH | HorizontalFieldManager.USE_ALL_HEIGHT){
  
              //Override the paint method to draw the background image.
              public void paint(Graphics graphics)
              {
                  System.out.println("come to here..!!");
                  width = graphics.getScreenWidth();
                  height = graphics.getScreenHeight();
                  //Draw the background image and then call paint.
                  graphics.drawBitmap(width/2, height/2, 150, 40, backgroundBitmap, 0, 0);
                  super.paint(graphics);
              }            
  
          };
  
          //The LabelField will show up through the transparent image.
          LabelField labelField = new LabelField("This is a label");
  
          //Add the manager to the screen.
          mainScreen.add(horizontalFieldManager);
  
         mainScreen.add(new SeparatorField());
         mainScreen.add(hori2);
         hori2.add(labelField);
  
          //Push the screen.
          pushScreen(mainScreen);
      }
  }
  

  Help, please.

  I have already pointed out the problem with USE_ALL_HEIGHT in first Manager add you to the form. Drop this style bit, otherwise sublayout your screen will generate an exception, and nothing appears!

  If you want HorizontalFieldManager to be of a particular size, regardless of the height of managed fields, replace its sublayout:

  HorizontalFieldManager fieldManagerTopBanner = new
           HorizontalFieldManager()
  {
       protected void sublayout(int maxWidth, int maxHeight) {
          super.sublayout(maxWidth, maxHeight);
          int myDesiredHeight = ;
          setExtent(getWidth(), Math.min(myDesiredHeight, maxHeight));
       }
  
       protected void paint(Graphics g)
       {
            // g.setBackgroundColor(0x000000);//blue
               g.drawBitmap(100, 150, 100, 200, jlnLogoImg, 0, 0);
  
            //g.clear();
              super.paint(g);
       }
  };
  

• Display scrolling always scroll to the last component

  Hi, I saw scroll containing multiple components and a listview.

  After updating to the new operating system the list always move and what list-> always scroll down options point / last component

  Before the update, this does not happen.

  How to set the position at the top of the display to scroll? Do I need to put this position?

  Thank you

  Maybe it's because I'm using webView to show the image of the web

  Now I changed to ImageView on ListView item to display web image, and the problem is not repeated

  I draw from this example to show the web using ImageView image:

  https://github.com/BlackBerry/Cascades-samples/tree/master/TLDR

  Thank you

• Sidebar.exe will not start

  Hello, Microsoft community.

  My problem is, sidebar.exe will not start. He does not appear in the Manager of tasks and does absolutely nothing when I run the executable file.

  I have a new laptop, just installed Windows 7 Ultimate 64 - bit on it. Now, here's what I just did after installing Windows:
  1 remove some windows components:

  -IE

  -Windows media center

  -Games

  -Tablet components

  2 installed all updates and drivers needed

  3 optimized for SSD Windows (I installed on the SSD and HDD extra for Windows files):
  -moved my user on an internal HARD drive folders
  -off hibernazation
  -a rejected the files on the system drive for the content index
  -Move page file of SSD to HDD

  -people with disabilities Prefetch and Readyboot

  To solve the problem, I tried (I rebooted after each operation):

  -running sfc/scannow (says it fixed a few errors, but eventually I saw no changes)

  turn the component Windows Gadgets

  -in the course of running sidebar.exe administrator

  -installation of hotfix (http://support.microsoft.com/kb/979164) - said that it is not compatible with my setup.

  I really hope that the information is more than enough and can someone help me solve the situation.

  Hello

  Glad to know that you were able to resolve the question and thank you for sharing the information with us. For more information on this update, see Microsoft KB article:

  The fix it solution described in this section is not designed to be a replacement for any security updates. We recommend that you always install the latest security updates. However, we offer this fix it solution as an option for workaround for some scenarios.

  MS13-038: Internet Explorer security update: May 14, 2013

  http://support.Microsoft.com/kb/2847204/en-us

  Thank you and best regards,

  John