Start Thunderbird pop - up said "could not initialize the security component.

Similar Questions

• Firefox suddenly stop working and I get the following error message: could not initialize the safety component of the application. Most

  Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
  restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
  behavior when you access security features.

  See:

  • https://support.Mozilla.com/kb/could+not+initialize+the+browser+security+component

• The attention! "Could not initialize the component of the application security...". »

  I started receiving this alert after restart last Saturday (22/02/2014) and freezes before Thunderbird it is fully operational: (incorrect application behavior?)

  Could not initialize the safety component of the application. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features.

  I have over 500 GB free on the hard drive and have checked the TTBOMA directory. As recently as this
  morning I still once uninstalled using TB TB uninstall utility, rebooted and reinstalled from the Mozilla Web site. Nada,.

  Toshiba Satellite L875D
  Windows 8

  Troubleshooting Info:

  Thunderbird
  Version 24.3.0
  User Agent Mozilla/5.0 (Windows NT 6.2; WOW64; RV:24.0) Gecko/20100101 Thunderbird/24.3.0

  Any help out there?

  Delete the file cert8.db in Thunderbird profiles folder.
  
  This will remove all the intermediate certificates Thunderbird has stored.

  • http://KB.mozillazine.org/Profile_folder_-_Thunderbird
  • https://support.Mozilla.org/KB/couldnt-initialize-applications-security-component

• BlackBerry Smartphones could not initialize the databases during synchronization of Blackberry Desktop Software

  The said software "could not initialize the databases" and does not sync my BB.  This has happened for a week.  I reinstalled the Desktop software, reset to factory settings, restore a backup file, did a hard reboot by removing the battery, tried to synchronize an element (calendar, contacts, tasks, notes), at one time, updated BBM all to nothing does not... Help.

  Looking at the synchronization log, he said this...

  14:49:29.765 CRSyncUtil::BackupCacheDBs: error copy of the file 'C:\Documents and admin Local Settings Application Data is in Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Data\4_65538_PR.tdc' to 'C:\Documents and admin Local Settings Application Data is in Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Data\4_65538_PR.tdc.sav': 0 x 00000070 (there is not enough space on the disk.)

  I looked at this file and at the time I started to get into trouble.  It was enormous... I have moved out of the directory and tried to re-sync.  It worked!

• get the message "could not initialize the browser security component" offers solutions does not

  I get a message "could not initialize the browser security component" more a screen empty. 5 solutions offered in aid, only to create a new profile help, but this helps only for this session! So, I'll have to create a new profile each time I start Firefox. This means not favourites, without Add-ons (they require a reboot), etc. I even tried to delete the profile by default, but it does not help. The new profile is deleted whenever I start. What should I do?

  I've done this several times. The new profile would work for a single session. Each time, Firefox (or something) would remove the new profile, so he did not; I'm done with the default profile, which was obviously altered. Here's what finally worked. Of after your 1st answer, I saw that the other profiles exist as subfolders in the profiles folder, even if they were not listed when I did firefox.exe - p. So, I got the idea to uninstall Firefox and see if these files were still there. And they were! In fact, records of Mozilla, Firefox and profiles had not deleted with uninstall. I deleted the files, re-installed and now I'm fine and write for Firefox. So, if someone continues to have problems with a corrupted profile, suggest to uninstall and then deleting all records related to Firefox that are left behind.

• Virtusa Tennis 4: Fatal error! Could not initialize the Games for Windows Live. This application will be closed.

  Original title: Virtusa Tennis 4

  Virtua Tennis 4 error message has

  "Fatal Error!"
  Could not initialize the Games for Windows Live. This application will be closed.

  Hi Ravikumar,

  Of Virtua Tennis are what version you try to work with?

  It seems that Virutal Tennis version is not compatible with Windows 8.1, you can check the Windows Compatibility Center.

  See also:

  
  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  However, uninstall the "games for Windows - LIVE redistributable Microsoft" and 'Microsoft Games for Windows Marketplace' and resettlement of http://www.xbox.com/en-US/Live/PC/DownloadClient allowed little such users mentioned by ' GeraldLuger answered December 30" provided article.»

  Virtua Tennis 4 - games for Windows LIVE
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/Virtua-Tennis-4-games-for-Windows-Live/81e86e55-6d8c-4703-B09E-190306110238

  Hope this information helps. Response with status so that we can help you.

• Could not find the ColdFusion component or interface

  I get an error 'Could not find the ColdFusion component or interface' when I try to call CF feed or http methods, for example:

  localtest.httpService = new http();

  Results in the error, 'Cold not find the ColdFusion component or interface http'

  I have two CF 9 instances that are running on the same machine (Windows Server 2008), both running the latest patch (patch 2). The two cases raise the same error. I have another separate server running CF 9 (does not have the hotfix 2 installed) and it can run code very well. I guess feed() and http() are defined in an Adobe ColdFusion cfc in the CFIDE directory somewhere, but I don't know which because they are encrypted.

  When you say "mapped" do you mean "with a CF mapping? If Yes, what is the mapping and where?

  On my install CF9, I've got a custom tag path defined, that points to the cfusion/customTags directory, which in turn contains the com/adobe/coldfusion dir, which is where the CFC is. It's the out-of-the-box config.

  Due to the track being defined custom tag, all files within this subdirectory structure can be treated without any other path, such as:

  new http()

  A mapping to CFIDE won't help you, because the files are not in the dir of CFIDE. And even then, say you had a map to cfusion/customtags called "/ foo", you would need the path access to the CFCS in your code:

  new foo.com.adobe.coldfusion.http)

  (or have an import statement that precedes the new statement)

  --

  Adam

• I recently moved notebook I have all my sequential codes. But when I try to install new downloaded it tells me that the installation program could not initialize the .dmg files. Even with the PES, PS and flash player. None of my installers will initialize

  Literally what the title above says. I just can't get anything to boot. CS4, CS5, PSE 8 PSE 9. It worked just the other day when this laptop had NOTHING on this subject. but now that I have all my files migrated absolutely nothing does not yet have flash player.

  Have you checked: error: "Setup cannot initialize ' | Windows

  Failed to initialize the installation of Adobe

  Mac - installer failed to initialize. (etc.) Help! I can't install the CS6 Master Collection Suite.

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

  Setup could not initialize photoshop cc, Fixed - YouTube

  Concerning

  Stéphane

• Could not initialize the beak. a missing file?

  I have cs 5.5 but miss me my CD, so I tried to download it from the website of adobe, but for some reason, they wouldn't let me have when I put my serial number in.  I downloaded the demo of creative cloud so that I could work but now I tried to re-download my version and an error came say Setup could not initialize it may be due to a missing file...?

  Hello

  You can download it here: Download CS5.5 products

  Please see the instructions to extract the files and install your product.

  Alternatively, if you still have questions, you can download it here:

  http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html

  These links may be useful if you need assistance:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Troubleshoot installation with the log files. CS5, CS5.5, CS6

  Installation and launch log errors | CS5, CS5.5, CS6, CC

  Concerning

  Gilles marneffe

• Error message - "Could not create the security default policy"

  I just reinstalled Acrobat X on a new computer (upgrade to Acrobat 8).  Now, when I open a file in Acrobat X, I get a message error that says "could not create the default security policy."   How can I fix? Pourrait

  Hi dawlaw,

  There is a bug in Adobe software. Acrobat X pro and standard both install properly if any other Adobe product was already installed, but both disrupts the installation (do not create the AppData\Security subdirectories) if another product from Adobe that has not created AppData\Security directories has been installed first. Adobe has only been tested installation on machines that never had other Adobe products installed. They do not consider that other Adobe products can already installed.

  (Alternative 1 (safer) - (a) uninstall all Adobe control panel products, b) then delete (or rename) the directories \AppData\Local\Adobe and \AppData\LocalLow\Adobe \AppData\Roaming\Adobe - Adobe never cleans these directories after uninstall. (c) make an own Acrobat x pro or standard installation before you reinstall any other Adobe product.

  Solution 2 - copy \AppData\Local\Adobe\Acrobat\10.0\Security and \AppData\LocalLow\Adobe\Acrobat\10.0\Security from another machine that works.

  Kind regards

  Nicos

• JBOD Qosmio G20 - could not initialize the disk of 320 GB - 1RAID-0

  Hello, comrades Toshiba users,
  at first, I apologize if this question has already been answered, but I did not find the answer to my problem.

  One of my colleagues has a Toshiba Qosmio G20 with two 80 GB drives. Big 17-inch "surf-board-sized" computers laptops are not my cup of tea, but the Qosmio him quite well served.
  We tried to upgrade the two hard drives of aging in his laptop. With considerable experience in replacing the readers of the laptop, I didn't expect no particular surprise, but I was wrong.

  We tried to replace the original disks
  Bay 1: 80 GB Fujitsu drive, System
  2: 80 GB Fujitsu drive, data, RAID off the coast of the Bay

  with the new
  Bay 1: 320 GB WD Scorpio
  WD Scorpio 2: 320 GB drive Bay.

  The BIOS of the G20 is v1.30, the latest version. It recognizes new readers-, but one of the new marking as 1RAID-0 disks fails. After trying to "initialize" the 320 GB drive in bay 1 as 1RAID-0, on the third page of the G20 of BIOS, there is a disk activity, but the drive remains in JBOD mode.

  Unable to mark the drive of 320 GB 1RAID-0, I am unable to use the 320 GB drive as a system disk.

  If the original system drive is cloned on a new 320 GB drive, that it does not start. Starting XP * begins * but subsequently fails with STOP 0x7B - in other words, the infamous blue screen INACCESSIBLE_BOOT_DEVICE when the Toshiba RAID driver is loaded during Windows startup.
  Plain vanilla CD, of course with slipstreamed windows installation driver Toshiba, impossible rest. Installing Windows don't "see" drive in Bay 2.

  When the drive system is put in the high Bay and G20 is started from it, Windows XP starts correctly. The drive in Bay 1 is accessable from Windows, however, remains offline in the RAID from Toshiba console. If the start player in Bay 2 is not an option, too.

  A similar problem, where the owner could not install a system of 200 GB drive is described here
  Link: http://tinyurl.com/38wokw
  The owner, however managed to install a 100 GB drive and we have resorted to 80 GB of disk as a system disk and the only player upgrade in Bay 2 to 320 GB.

  I understand what happens when the disk is 'initialized' in the BIOS. Only brands of BIOS of Toshiba disk 1RAID-0, and it breaks down on 320 GB drive. I will refrain from expressing my opinion on this practice.

  My question is - if it is possible, how * manually * mark the drive of 320 GB 1RAID-0?
  Using a hex editor, dd or something similar is no problem. A partial answer would also know the disc more large size which * can * be marked with success under the name of 1RAID-0 at BIOS G20.

  Thanks in advance.

  Hello

  I m not 100% sure, what could be wrong by presumably 320 HARD drive size might be too big!
  How about the 100 GB or 120 GB hard drives?

  I think you should consider it because usually most of the BIOS supports a HARD drive size limitation and therefore not all sizes are supported.

  But note; using the configuration of 1RAID-0 (striping), met by the operating system size is twice more only if the smaller of the two HARD drives in RAID configuration. Using RAID-0, all data on both disks will be lost, even if it is training of two disks fails.

• Error message could not initialize the canvas shared in Live mail

  When you use direct mail, error message.

  Failed to initialize the shared canvas: System. IO. FileNotFoundException

  Following a long text with strange error messages.

  It is having the effect that I am not able to create a live message.

  What should I do?

  IM using Windows Vista

  This was due to an update live essentials - if you have to live the next time that you update back to square 1 fundamental. I tried the system restore just prior to update and it was fixed up to reinstalled Windows update KB 2520039 - thank you

• Fallout 3 PROBLEM! Error message. Could not initialize the rendering engine.

  I recently bought Fallout 3 for my vista system, I haven't installed very well no problem, when I click on play in the menu, it comes up with this error message:

  "Failed to initialize the rendering engine.
  Hardware T & L required but not taken in charge by adapter"

  Does that mean I need a new graphics card or I can download an update of Dell? My office is a Dell Inspiron 350. Please help ASAP!

  Lordy22

  Hello Lordy22,
  The fix for this problem is to install a new video card with T & L capacity.

  If please reply and let us know if your problem is resolved or if you need more help.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Stronghold 3 could not initialize the engine

  I plug just the new firefly game Stronghold 3 installed on my computer which is quite new and ran the updates you connect to steam, but when I try to run the game I get a message that bed "unable to initialize the engine" and I not go further. I tried to look on the web for answers, but as the game is released today in the United Kingdom, I realize I might just have to wait some time until someone can find a solution. I tried to reinstall the game, change the graphics options on my pc, running in different versions of windows, and I even went through the whole process of updating graphics drivers but still the same problem.

  Any help would be greatly appreciated
  Thank you very much
  VengeLord88

  If you try to play the game on a laptop with nVidia graphics card that supports hybrid switchable with intel HD Graphics

  then this is the origin of the problem...
  Click on Device Manager and disable the intel HD Graphics until u play the game...

  and now run the Stronghold 3 exe file. as an administrator, otherwise it will crash under windows 7 64-bit...

  Take advantage of...

  do not let your queries to * address email is removed from the privacy *.

• PS elements 11 cannot use the text function. Error message could not initialize the text.

  When I try to use the text function the letters do not appear. Text feature appears frozen. Get the error message - unable to initialize the text.

  Recently PSE11 uninstalled and reinstalled. Downloaded 2 Google font. Was able to use the text function with Google fonts with no problems. Two days later, attempted to work with the text function and the typed letters appear on the screen/layer. Tried to add the text with fonts pre-installed PS - still once, no text appeared. Impossible to set up a text box. How can I fix it? Thank you

  Suggest that you reset the text tool, that only he can fix.

  I believe in PSEv.11, there is a small arrow, top of the page to the left on the tool options bar. Click on this.

  If the arrow is not there, look in the options bar to the text tool, on the right, for a box with lines inside. Adobe changed the location and icon in later versions of the program.