"DRAWING FAILED".

Similar Questions

• Corrupt photos on my Satellite M50

  Hello

  I have a Satellite M50-130 and have just started to have a problem with the photo files.
  They began to corrupt and the preview comes up with the words "drawing failed" or "no preview available".

  I can still see the thumbnail image but the info for the file, IE the size and what the camera has been used disappeared.

  I don't know why this is happening and it has not stopped. I open old files with photos in and found that one or two were corrupted.

  It could have been using ad-aware, I guess. I did a system restore to a different time, but this does not solve the problem.

  Any other ideas?

  Thank you

  Hello James

  Please don't be crazy on me, but I see no connection between the described issue and Toshiba as the manufacturer of the laptop.

  In my opinion corrupt photos has something to see how you use your laptop and stuff everything you have preinstalled on it. The fact is that current operating system you will be able to open all the jpeg and bmp files (if it is not damaged).

  What kind of photos you have (jpeg or something else)? Have you tried to open these files on another PC?

• SEE SLIDE SHOW DOES NOT

  The 'View as slideshow' feature no longer works.  A picture back but does not go to the next image. He's not going to the next image, even when I click on the arrow to the front foot.  When I click on the down arrow I get error "drawing failed".  Recently, this feature stopped working properly.

  Hello CLEM1949,

  Thank you for your message.  First we will ensure a setting is correct.  This setting prevents slideshow of work.
  Click 'Start' > select 'My computer' > click 'Tools' > select 'Folder Options '.
  On the tab 'Général' and 'Missions', make sure that "Show common tasks in folder" is selected.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• CartesianDataCanvas

  I'm trying to shoot on a Flex ColumnChart to add lines of tendency for the grouped items. The graph XAxis has 3 groups (5 credits and below, 6 or 7 and 8 credits or more) and within each of these groups, three years of data for the school in question. I have to add a trendline to the School Board on the top of each of these groups (so that each group has its own trend line). I can easily add a trend that crosses groups (using the methods moveTo and lineTo CartesianDataCanvas), but this isn't the desired effect.
  
  Is it possible to pass a variable group-name not to these methods? Whenever I spend a certain number, the drawing fails silently. If I pass the name of the group, the trend will not draw correctly (it just pulls straight up and down to the central point of the Group).
  
  Any help would be greatly appreciated.

  I finally got it working!

  I use the maximum yAxis and the height properties CartesianDataCanvas to understand data value shifts and to loop through the ColumnSeries.item table to look at their x value itemRenderer. I combine it with the actual data and then use CartesianDataCanvas.graphics.moveTo and CartesianDataCanvas.graphics.lineTo (instead of the methods moveTo and lineTo the CartesianDataCanvas itself). It took 3 days to make it work, but it works!

  Here's the working solution (a nice nightmare in loop!)...

  
  http://www.Adobe.com/2006/mxml"layout ="absolute ".
  backgroundColor = "#FFFFFF" backgroundAlpha = backgroundGradientColors '1' = 'null '.
  creationComplete = "init ()" "
  >
  
  Import mx.charts.series.items.ColumnSeriesItem;
  Import mx.collections.ArrayCollection;

  [Bindable]
  private var _dataGroups:ArrayCollection = new ArrayCollection([)
  {
  label: '' 2004-05.
  DataKey: "_data1."
  },
  {
  label: "2005 - 06',
  DataKey: "_data2."
  },
  {
  label: ' 2006-07'.
  DataKey: "_data3."
  }
  ]);
  [Bindable]
  private var _dataSchool:ArrayCollection = new ArrayCollection([)
  {
  _group: ' 5 credits or less. "
  _data1: 15.
  _data2: 10.
  _data3: 5
  },
  {
  _group: 6 or 7 credits
  _data1: 20.
  _data2: 15.
  _data3: 10
  },
  {
  _group: "8 credits or more.
  _data1: 65,.
  _data2: 75,.
  _data3: 85
  }
  ]);
  [Bindable]
  private var _dataBoard:ArrayCollection = new ArrayCollection([)
  {
  _group: ' 5 credits or less. "
  _data1: 20.
  _data2: 15.
  _data3: 10
  },
  {
  _group: 6 or 7 credits
  _data1: 25,.
  _data2: 20.
  _data3: 15
  },
  {
  _group: "8 credits or more.
  _data1: 55,.
  _data2: 65,.
  _data3: 75
  }
  ]);
  private function setTrend (): void {}
  chart_canvas. Graphics.Clear ();
  (chart_canvas). Graphics.LineStyle
  1,
  0 x 336699,
  . 5.
  true,
  LineScaleMode.NORMAL,
  CapsStyle.ROUND,
  JointStyle.MITER,
  2
  );
  Calculate the offset of the data for drawing
  var yAxisMax:int = yAxis.maximum;
  var yAxisHeight:int = chart_canvas.height;
  var dataOffset:Number = yAxisHeight / yAxisMax;
  Generate the data table
  var dataArray:Array = new Array (chart.series.length);
  for (var i: int = 0; i< dataarray.length;="">
  dataArray = new Array();
  }
  Fill in the data table
  for (i = 0; i< chart.series.length;="">
  var columnSeries:ColumnSeries = chart.series as ColumnSeries;
  for (var j: int = 0; j< columnseries.items.length;="">
  var columnSeriesItem:ColumnSeriesItem = columnSeries.items [j] as ColumnSeriesItem;
  var xPos:Number = columnSeriesItem.itemRenderer.x + (columnSeriesItem.itemRenderer.width / 2);
  var yPos:Number = yAxisHeight - (_dataBoard.getItemAt (j) ["_data" + (i + 1)] * dataOffset);
  if(i == 0) {}
  dataArray [j] .push (new Point (xPos, yAxisHeight));
  }
  dataArray [j] .push (new Point (xPos, yPos));
  If (i == chart.series.length - 1) {}
  dataArray [j] .push (new Point (xPos, yAxisHeight));
  }
  }
  }
  Call on the CartesianDataCanvas
  chart_canvas. Graphics.beginFill (0xFFFF00, 0.10);
  for (i = 0; i< dataarray.length;="">
  var dataSet:Array = dataArray like table;
  for (j = 0; j< dataset.length;="">
  var: a Point = [j] dataSet as Point;
  if(j == 0) {}
  chart_canvas. Graphics.MoveTo (point.x, point.y);
  chart_canvas. Graphics.LineStyle (0 x 336699, 1, 0);
  } else {}
  chart_canvas. Graphics.LineTo (point.x, point.y);
  (chart_canvas). Graphics.LineStyle
  3,
  0 x 336699,
  . 75.
  true,
  LineScaleMode.NORMAL,
  CapsStyle.ROUND,
  JointStyle.MITER,
  2
  );
  If (j == dataSet.length - 2) {}
  chart_canvas. Graphics.LineStyle (0 x 336699, 1, 0);
  }
  }
  }
  }
  chart_canvas. Graphics.endFill ();
  }
  ]]>
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

• Once to submit the application through Blues draw relies fail to Vcenter

  Once to submit the application through Blues draw relies fail to Vcenter

  Check your size VCDB and shrink your database and try

• I see a bug in MacOS where the operating system sometimes fails to draw miniatures

  Photoshop does not thumbnail after that I modified a file and saved the changes. I've tried clicking the button IT on the FILE MANAGEMENT PREFERENCES on PS and nothing happens. I have tried rebooting etc etc and the thumbnails do not always appear. My operating system is an OS Yosemite 10.10.5. Someone knows how to solve this problem. It is important for me because I rely on my editing process in different looking thumbnails once they have been modified and saved. They lose the white frame. Thank you very much.

  The "white frame" thumbnails are an OSX thing. CC uses the new procedure as Apple heads in inches on OSX rendering.

  I think only CS6 and uses of earlier versions of the old way, and you don't want to go back to CS6 for this.

  Photoshop: Thumbnails in the OS X Finder have white edges around them. Community customer Photoshop family

  Gene

• verification failed - there was an error connecting to server Apple ID.

  Just upgraded to 10.11.4. Get this error when trying to login to icloud

  Verification failed

  There was an error connecting to server Apple ID.

  I can sign in here with my id, I can sign in icloud via my web browser to my id.

  What I can't do is connect from my imac (model 2015)

  Where should I go form here?

  I have exactly the same problem and I can check that if I create a new user on my MBP (current model of 15 "), I am able to use my Icloud account once again, but not under my main user. Thus, each suggestion found in the forums here:

  • Step 2 review the deactivation
  • Config of Flushing DNS or try another DNS server
  • Uninstalling an Antivirus snake oil product, I do not use

  did not help at all. But there must be something with my user account, the system itself seems to be fine as a new user account works with the same icloud account.

  This can happen now reasons:

  • I went to use the family option one or two months previously - unplausible that this has something to do with it

  Console output for two seconds after clicking on login to icloud prefs: line 2 + y has at least 20 times with different Classes but the same error:

  02.04.16 10:14:57, 409 akd [311]: NSURLSession/NSURLConnection HTTP load failed (kCFStreamErrorDomainSSL,-9807)

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: it has no sense to draw an image when [NSGraphicsContext currentContext] is zero.  It is a programming error. Break on Sub _NSWarnForDrawingImageWithNoCurrentContext() to debug.  This will be recorded only once.  This may change in the future.

  Next steps for me will be

  • hoping someone here has an idea, so I don't have to wast hours for this
  • try to restore a backup time new machine to a new user account (would be less work) - but this option I think that will lead to problems again. I'll let you know if it is a possible way to solve the problem.
  • From a user account from scratch and selectively import settings - there is no alternative option that takes time. Usually, this is not necessary and one of the reasons why I use a mac - only not to reinstall Windows every 3 months...

• Realtek RTL8188EE 802.11 b/g/n wifi adapter failed

  I have a labtop HP running windows 8 and just recently... in recent days no wireless connection cannot be found. I ran the troubleshooting and these error messaages arose.

  as the subject line (Realtek RTL8188EE failed
  * a network cable is not plugged in correctly or may be broken.

  This is a laptop HP 15 (labtop)

  Hello @ty3bis ,

  Welcome to the HP Forums!

  It is an exceptional place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand you have lost your wireless network and when you have run the troubleshooter you received two result.

  as the subject line (Realtek RTL8188EE failed
  * a network cable is not plugged in correctly or may be broken.

  Have you tried reinstalling the wireless card?

  Have you tested for hardware failure? Screening of hardware failures (Windows 8)

  Here is a link for troubleshooting wireless network and Internet (Windows 8) that can also help.

  You can contact HP support for help also.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  The best of luck!

• Satellite L750 - receive messages from ordinary this HARD drive is about to fail

  I have a laptop of PSK2YA - 04K 010 L750 Satellite.
  I get regular messages that my hard drive is about to fail.
  I backed up all my important stuff.
  I did not the recovery discs until I started getting these messages.
  I've been able to create a windows repair disc & also recorded an image of the hard drive on an external hard drive with no problem.

  I bought and installed a Western Digital 750Go WD7500BPKT hard drive replacement.
  I tried to do a system restore using the image I created on my external hard drive
  "I get the following message appears a few seconds after the start of the reimage" the operation failed because of a device error encountered with the source or the destination. (0x8078012D)

  I reassembled the original hard drive & make a set 4 DVD discs using the Toshiba Recovery shortcut.
  I put the Western Digital drive HARD back in & run these discs. Disk1 ran right to the end, then put in disk2 wouldn't do anything, the drawer of the DVD would keep opening asking me to put in the disk.
  Don't really know where to go now & am hoping to get a few ideas from people in the know or have been here before.

  HHHHeelp please

  > I tried to do a system recovery using the image I created on my external hard drive

  How did you create this image?

  > I put the Western Digital drive HARD back in & run these discs. Disk1 ran right to the end, then put in disk2 wouldn't do anything, the drawer of the DVD would keep opening asking me to put in the disk.

  It looks like the 2nd disc can be read correctly or the 2nd disc was not created correctly.

  I first recommend you to clean the lens of the laser of the reader of CD/DVD alcohol or cotton tip.
  Then try to run the installation by using the recovery disk once more.
  In case this isn't possible, your recovery disk is defective.

  If the recovery disk that is faulty, you have an option to order here:
  http://backupmedia.Toshiba.EU/landing.aspx

  The 2nd option would be clean Microsoft Windows disk usage.
  Missing drivers may be downloaded from the Toshiba UE driver page.

• MacBook Pro 13 "(mid-2012) i7, 8 GB, 750 GB - VERY low LAG high-end GAMES OVERHEATING [Metal fail?]

  First of all, Merry Christmas to you all and hope that you guys are doing well.

  As the title says I am using the updated Macbook Pro Mid2012 Standard (Non-retine). In any case the introduction of the metal, shouldn't this smoothly? I see really no improvement in terms of game performance other than an increase in the value of 1024 MB to 1536 MB vRam. More it overheats a lot even in normal operating conditions (such as surfing the Web or watching streams etc..) Just to let you know that my Macbook Pro has a minimal dust inside the unibody shell.

  Would be grateful if you help out me

  You have several distinct concerns:

  For metal application support, hardware and software, please read this this Apple Support document: list of computers Macs that supported Metal - Apple Support

  and this message:

  Re: el capitan and metal, test application?

  Energy concerns please read that apps can affect Mac performance, battery LIFE, temperature and fan - Apple Support activity. Identify the process or processes causing excessive consumption of energy and to evaluate the performance of your Mac when these processes are used or not used.

  Just to let you know that my Macbook Pro has a minimal dust inside the unibody shell.

  Most dust internal preventing the proper heat dissipation accumulate in the fins near MBP fan extraction or amateurs (model 13 "has only one). Exhaust fans speed will increase as necessary to achieve their reduced capacity to dissipate heat. If that does not work, the next thing that happens is that your Mac will automatically reduce its processor demand so that it produces less heat which must be dissipated. If this still fails to keep temperatures limits, the Mac will just stopped on its own. Excessive dust should be removed, but it is better to have Apple or a FSAA do, due to the high probability of damage should you decide to do this yourself.

  Please be advised that fan of higher speeds tend to exacerbate the dust because moving to a greater volume of air per unit of time only tends to draw in additional dust. It's one of the reasons for the third system hacks that bypass the cooling system of the Mac should never be used.

• HP ENVY m6 1158ca: Windows 8 Pro Setup own activation fails 0xC004C003 blocked by OEM product key

  My hard drive died on my HP ENVY m6 1158ca.  I replaced and ran 6 discs recovery I created for my daughter and

  After the last completed album, I hit continue to do construction and each time after several reboots (ready devices... Prepares... ... Software administrator is installed) it would get the BSOD - 0xc000000f - a required device is not connected or not available.  SO I format the disk of 1 TB and do Factory reset again, and it still fails in the same way.

  After failing on several occasions, I've used a Windows DVD Pro 8 for another HP laptop and Windows 8 coming!

  However, the activation of Windows 8 needs a key I guess that the BIOS it will not work.

  Call Microsoft by using the "activate Windows by phone" gave rise to the statement "you must call OEM.

  to get a key and then call us back and then we can help you"

  The HP ENVY is out of warranty, who do I contact to get this key on the BIOS?  or the BIOS button does not work

  because the Windows 8 Pro does not correspond to something?  The laptop came originally with Windows 8.

  Thanks in advance for any help,

  Marlene

  Hi @ml88,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  The product key that is embedded in the BIOS may not work with the version of Windows 8 Pro.

  Here is a document HP-HP System Recovery troubleshooting (Windows 8) computers you can review. It can help restore the system from the recovery disks.

  If you need to get the recovery media:

  HP computers - get HP recovery disks or HP USB recovery disc

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards

• System Image backup has failed during the backup

  I have a 2 years old HP pavilion g series notebook.  I did a backup system image on dvd + r discs. It was almost over, when the drive #99, I got this message "the backup failed. The system cannot find the specified path (0 x 80070003)
  My computer is no longer under warranty and I'm $ 60 in the disks if they can't be used.  I need to know there is a way to save what I saved and restart the backup of the Image where it left off?
  
  Product: A6Z59UA #ABA
  Model: g61d60us

  Hi CherylLyme,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you did an image backup, and while he was almost done you received the error (0 x 80070003).  Here is a link to a response from Microsoft to help you. Windows backup error 0 x 80070003 (One answer per Vinod N)

  I'm not sure if you would be able to leave and get back on disc 99, because once you have repaired, it will be changed from when you first ran the backup.  The disc that you used only were not read, accessible writing, so you wouldn't be able to reuse them.  You can see that an external hard drive would be a more economical way to make your backups. The data must be in one place and easier to store.  If you decide to use a USB key, so do not more then the 32 GB and won't Windows 8 on it.

  You can probably buy an external drive for on the cost of the replacement of disks.  Here is a link to the HP Shopping external storage , but you can buy one at several places, Office Depot, Staples, Wal-Mart and computer shops are few.  I hope this helps.

• 5V power supply seems to have failed on PCI-6221

  I recently had a test set-up down, and it seems that this could be linked to the + 5v supply.

  When I connect 5v to the unit via an external power supply Board, the Board draws 50ma, far as the 1A, according to me, the PCI-6221 power is specified as being able to provide.  When I connect the camera Board to the PCI-6221 via cable, only 0.67v are measured on the map.  However, when the cable is not connected to the card of the unit, I measure 4.5V on the power supply 5v card PCI-6221.

  I couldn't find a standard of accuracy for the power supply of 5v, but I expected to be less than 0, 5V.  It seems that my PCI-6221 power can produce a voltage in open circuit, but decreases rapidly under a load condition, which seems that the jury didn't.

  Ideas?  Thanks in advance.

  Hi Scott,.

  Terminal on the 6221 5V is rail 5V PCI bus with some type of lighter, so the accuracy will depend on the computer's power. Would you be able to try this card in a machine that has a work data acquisition card? This would exclude any power problem on this computer. If this test fails, it is likely that there is a fuse and you will need to contact us as Josh mentioned for an RMA number.

• Pavilion G6-1203ey: HDD Test FAILED, but can still start Windows

  Hello

  I have laptop HP Pavilion G6-1203ey. After installing Windows (7 ultimate, 64-bit) and some drivers on this topic and after several reboots, it hung at the Windows logo and I had to power off with the power button / stop. Then after having turned it on, it gave me the opportunity to fix problems that impede it to start, there let him to restore the computer to a previous restore point and after a reboot, the windows worked again. After that, I decided to do a check of the hard drive just in case.

  The hard drive self test ended up with a message: disk full 1 (305). Then, I installed an environment to help HP Unified Extensible Firmware Interface (UEFI) and made the hard drive from there. I chose the full test options, but it ended quite quickly (in about 1 minute), with the following result:

  Test Drive: 1

  HDD SMART Check: PAST

  Hard drive short DST: FAILURE

  FAILURE ID: PTTU22-5T774L-MFPV4K - 60S 003

  PRODUCT ID: A5Q15EA #B1R

  Hard drive 1

  __________________________________________

  Test drive: FAILURE

  A little more information:

  The former owner told me that the original HARD drive was defective, reason for which he replaced with this last year. He said that other than that, no problems with the laptop. Windows works right now and this disc is quite new, so I expect no problems with it, but the results of the tests mentioned above seem to be disturbing. Is there a reason to worry?

  Thank you

  Hi Alnuir,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post and looked into the ID of failure that you have published on the test runs DST failed. This error indicates a hard disk failure meaning that if it failed there could soon. If everything works I would be given for the backup of your data on a regular basis, just to be sure. You may have a local tech take a look at the hard drive to see how it is at the complete failure.

  Thank you

• HP Officejet Pro 8500 wireless: HP Officejet Pro 8500 W (A909g) 'alignment failed, refer to devicedocumentation for more details'

  I get a lack of alignment. I have replace the printheads and ink cartridges, but it always fails to align...

  The print quality test page print well and seems good... the line calabrate page break will print and look good...

  But when he tries to do the alingment... He quickly spit a page with only a few color line worm at the top of emphasise the full alignment... page after I spit that... He's sitting there for a few minutes... making his usual noise, but said failure.

  I did all three levels of print heads clean... Despite them being new...

  It will print things very well, but I get a monotube color alignment page after each draw with message of misalignment.

  Hey @ataktos,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that your Officejet 8500 W gives you alignment failure messages. I can help with that.

  I found a document that can help you with troubleshooting. The document was intended for a slightly different question, but the diagnosis is the same. You can find it by clicking on this link.

  If this still does not resolve your problem, then we can try a factory reset the printer. I will send you a private message on how to reset the printer shortly. If you still have problems after that then the printer will have to be replaced. You can contact the HP Support by clicking this link. If you scroll down on the next page and fill out the form you will find the telephone number of HP.

  I hope this helps and I hope you have a nice day!