Dreamweaver C3 hangs when an object data binding in an existing project is selected

Similar Questions

• The computer hangs when copying the data on the hard drive

  * Problem *:

  My computer freezes whenever I have transfer large amounts_ of the data on the disc from my computer. * It doesn't have this problem with my C drive *.

  First detected this problem while I was transferring some data in LAN. This problem occurs even when I copy data to my C drive to the D drive.

  Action taken:

  -Performed a full scan of my computer, found some viruses, but the problem persists
  -Do you have a check disk via Windows, as well as the TuneUp utility, no problem.

  Data sheet:
  OS: Windows 7 Professional 32-bit
  Processor: Intel Core 2 Duo t7200 @ 2.00GHz
  RAM: 1 GB DDR2 - SDRAM
  Hard drive: TOSHIBA MK1234GSX ATA Device(120GB)
  No partitions: 2

  Hello

  It of difficult to say what might be wrong here but if the question appears only using the second partition, then I recommend to check the State of the HARD drive.
  I use a very good freeware tool called Drive Fitness Test.
  Use google to download this software.

  It creates a boot disk that allows you to test the drive HARD and of course the two partitions.
  If the error would be detected, then it means that the HARD drive failure could be the reason for this

• You can use qualifiers when you use data binding and schema

  I am very new to the designer of the SLA and have worked only in a limited range to create fields and map these fields directly to an element in the schema.

  My xml instance looks like the below

  < person >

  < PersonAddress >

  < AddressType > home < / AddressType >

  < address > 123 Street, Sandiego, California < / address >

  < / PersonAddress >

  < PersonAddress >

  Dissemination of < AddressType > < / AddressType >

  < address > 123 Street, Sandiego, California < / address >

  < / PersonAddress >

  < PersonAddress >

  Employer of < AddressType > < / AddressType >

  < address > 123 Street, Sandiego, California < / address >

  < / PersonAddress >

  < person >

  The address information doesn't have to come in the same order as above and in some cases one of the address may not be there.

  I have an existing PDF that was imported as a work of art. It has 3 boxes to check, EmployerAddress Checkbox, checkbox mailing address, and home address box

  I wish that the boxes to be activated if the address type matching is present in the instance. In addition, there are a text box next to each check boxes for the related addresses.

  What is the best way to do this without doing an xslt transformation to transform the existing instance in another.

  Thanks is advance for your comments and answers.

  Hello

  So I think it's valid to have a PersonAddress element without an AddressType element.  The predicate is going to fine your group of data and to evaluate the expression for each PersonAddress.

  So if the AddressType is optional, you will need to protect yourself against this error, something like;

  $. PersonAddress. [if (Exists (AddressType)) then AddressType is 'Home' endif]. Address

  Is also worth AddressType Mail or postal? The error message does not match the original XML.

  Concerning

  Bruce

• Data binding does not detect changes

  During the passage of property that may be related to the function and assigning a new object data binding breaks
  Take a look at the following example.
  
  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" initialize = "init ()" >
  
  < mx:VBox >
  < mx:Text id = text = "{user.name"textbox"}" / > "
  < mx:Button label = "Update user" click = "updateUser (user)" / > "
  < mx:Button label = "Update User2" click = "updateUser2 ()" / > "
  < / mx:VBox >
  < mx:Script >
  <! [CDATA]
  [Bindable]
  private var: user;
  
  private function init (): void
  {
  User = new User();
  User.Name = "first name";
  }
  
  private void updateUser(newUser:User):void
  {
  newUser = new User();
  newUser.name = 'new name ';
  }
  private function updateUser2 (): void
  {
  User = new User();
  User.Name = "new Name2";
  }
  []] >
  < / mx:Script >
  < / mx:Application >
  
  File User.as
  package
  {
  [Bindable]
  public class User
  {
  public var name: String;
  }
  }
  
  Why the function updateUser break data binding?
  The updateUser2 function works

  Thanks for all replies ;)

  Suggestion of levancho on sends an event seems good to me.

  This could look like this:

  var userEvent:UserEvent = new UserEvent ("new user", newUser);
  dispatchEvent (userEvent);

  Where UserEvent is an event with the new object.
  Then all the elements that need this change pourraient, follow these steps:

  addEventListener ("new user", userChanged);

  private void userChanged(evt:UserEvent):void
  {
  evt. User; Update the link with the new user...
  }

  After looking more on the problem, I found:
  Initially, the main problem was that the variable in the function will not update the refence sent in the function when you create a new instance, regardless of the use of data binding or not...

• Elements of the array and the data binding

  In Flex 1.5 elements of the array do not support data binding. Here is an excerpt from a document of Flex 1.5 older ( Chapter 18, data binding):
  
  

  Quote:
  The tables can be used in the bindings in the same way as other types of object. However, the elements of array do not pull a ChangeEvent when their value is changed, so that they can not be used as a binding source when running.
  Data binding does not, however, copy initial values in the request or the instantiation of the component, so the connections with their source as an array element will be set to the value of the element of array (only once, at initialization time) and will not be updated later if the array element is changed.

• About the data binding object

  I've set up a Repeater to display XML data. A single field, called rsvpStatus, is a Boolean value, returning as Y or N. I'd rather see something like YES or no. so I thought I could put in place the following text box:
  
  < mx:Text text="{Constants.yesNoTranslator[data.rsvpStatus]}"/ >
  
  and also to set up an associative array reflecting O/N YES/no such as:
  
  [Bindable]
  public static var yesNoTranslator:Object = {N: 'No', Y: 'Yes'};
  
  I'm being warned by Flex Builder that:
  "Data binding will not be able to detect changes when using square brackets operator. For array, use ArrayCollection.getItemAt (). »
  
  Despite this warning, it seems to work.
  
  My question is:
  I've set up with this warning and assume it is useless, or is there a good reason to change the structure of my code?
  
  See you soon
  Craig

  Thanks good for this Sreenivas I'm much clearer about all this now.
  all this got me thinking - it would make sense to create a new class, say "ObjectCollection' ObjectProxy extension with a"getItemAt"method to facilitate the fixation on objects in situations such as these:
  (my apologies but no button code to join for some strange reason)

  
  http://www.Adobe.com/2006/mxml">
  
  
  [Bindable]
  public var yesNoTranslator:ObjectCollection = new ObjectCollection({Y:"Yes",N:"No"});)
  [Bindable]
  public var rsvpStatus:String = 'Y ';
  ]]>
  
  

  package
  {
  Import mx.utils.ObjectProxy;

  SerializableAttribute public class ObjectCollection extends ObjectProxy
  {
  public void ObjectCollection (point: Object = null, uid:String = null, proxyDepth:int = - 1).
  {
  Super (item, uid, proxyDepth);
  }
  [Bindable (= "propertyChange" event)]
  public void getItemAt(index:String):Object {}
  Return (this [index]);
  }
  }
  }

• Data binding occurs after onAdded() in CellRenderer?

  Hi all, I extend the qnx.ui.listClasses.CellRenderer for my TileList. I noticed that sometimes the this.data would be null in my overridden onAdded() function.

  After some tests, I realized that if I use a timer to check this.data seconds later, it would be filled with the correct data, it seems that the data binding happens a moment after the onAdded() function is called.

  I'm happy to rely on the timer to the time delay, but someone has a better solution? Is there something else I should listen to instead of according to onAdded()?

  Hey,.

  This kind of thing makes me forget all sleep haha clearly that I don't SLEEP much at all!

  OK, so I think I got the fix for this. instead of simply relying on onAdded() method that we must look in the drawLabel() method. in the contstructor this time, we do the new CheckBox object where our customization starts later with so we don't have duplicates of this object that is created each time the drawLabel method is called. instead of making the bulk of the work in the onAdded method, we will just to remove the object from the label that is displayed via the cell rendering engine. After that when the drawLabel() method is called, which is when we do our customization. mine includes a checkbox just to test. then we finally remove our object as usual in the onRemoved() method.

  Here's the code for update for the rendering engine:

  package
  {
      import flash.events.Event;
      import flash.events.MouseEvent;
      import flash.text.TextFieldAutoSize;
  
      import qnx.ui.buttons.CheckBox;
      import qnx.ui.buttons.LabelPlacement;
      import qnx.ui.listClasses.AlternatingCellRenderer;
      import qnx.ui.listClasses.List;
      import qnx.ui.text.Label;
  
      public class MyCustomCellRenderer extends AlternatingCellRenderer
      {
          /*
          * Place the object out here so that other methods can
          * access it
          */
          private var newCheckBox:CheckBox;
  
          public function MyCustomCellRenderer()
          {
              super();
  
              /*
               * Add the checkbox here so we dont keep re-adding a check box
               * whenever the onAdded method is called. other wise there
               * would be a lot of objects for checkbox
              */
              newCheckBox = new CheckBox();
          }
          override protected function onAdded():void
          {
              super.onAdded();
  
              /*
               * Do not want to use the label object at all. we want
               * to fully customize our cell renderer. for some reason
               * the label object is not considered a child object
               * when the drawLabel method is called so we must
               * removed it in this method where it is considered a
               * child object
              */
              removeChild(label);
          }
          override protected function drawLabel():void
          {
              if (this.data)
              {
                  /*
                   * Sometimes this function is called prematurely when there
                   * is no data object available and it is null so we only
                   * do our custom label when there is a data object available
                  */
                  newCheckBox.width = 500;
                  newCheckBox.label = this.data.label;
                  newCheckBox.labelPadding = 10;
                  newCheckBox.labelPlacement = LabelPlacement.RIGHT;
                  newCheckBox.setPosition(10,10);
  
                  addChild(newCheckBox);
              }
          }
          override protected function onRemoved():void
          {
              super.onRemoved();
  
              /*
              * Remember to remove the checkbox object
              */
              removeChild(newCheckBox);
  
          }
      }
  }
  

  I tested it on a list of single column and also a tilelist component and how it works to 100%. Let me know if I missed something. happy you raised this point! Good luck!

• Problems with the removal of the data binding Flex to use Air 14

  Hello

  I was wondering if anyone had an optimal solution to replace the Flex Air 14 data binding classes. I can't merge the Flex and Air SDKS more for all liaison managers need to be replaced. Everybody runs into this problem yet? Automated link generation and manipulation was the best feature of Flex and now that it's broken it creates huge problems for me.

  It is Air of mobile and desktop applications. They still build everything simply no work of event management.

  See you soon,.

  Pete

  I forgot that I myself have solved last Dec. So basically from what I can tell that the precompiler is either no [Bindable] conversions so you must manually create the getters and setters for your model when it changes. I hope this helps anyone who may run into the same problem. There is literally no documentation on this wheres.

  i.e.

  [Bindable]

  public var username: String;

  becomes

  private var _username: String;

  [Bindable (= "propertyChange" event)]

  public function get username (): String

  {

  return this ._serviceState;

  }

  public function set username(value:String):void

  {

  var oldValue:Object = this ._username;

  If (oldValue! == value)

  {

  This ._username = value;

  If (this.hasEventListener ("propertyChange"))

  this.dispatchEvent (mx.events.PropertyChangeEvent.createUpdateEvent (Thi, "username", oldValue, value));

  }

  }

  You must also make sure that what ever class contains this property implements IEventDispatcher and has the following functions:

  	//	Implementation of IEventDispatcher
  	//
  	private var _bindingEventDispatcher:flash.events.EventDispatcher =.
  		new flash.events.EventDispatcher (flash.events.IEventDispatcher (this));
  	/**
  	* @inheritDoc
  	*/
  	public function addEventListener (type: String, listener: Function,)
  									useCapture:Boolean = false,
  									priority: int = 0,.
  									weakRef:Boolean = false): void
  	{
  		_bindingEventDispatcher.addEventListener (type, listener, useCapture,
  			priority, weakRef);
  	}
  	/**
  	* @inheritDoc
  	*/
  	public function dispatchEvent (event:flash.events.Event): Boolean
  	{
  		Return _bindingEventDispatcher.dispatchEvent (event);
  	}
  	/**
  	* @inheritDoc
  	*/
  	public void hasEventListener(type:String):Boolean
  	{
  		Return _bindingEventDispatcher.hasEventListener (type);
  	}
  	/**
  	* @inheritDoc
  	*/
  	public void removeEventListener (type: String,)
  										Listener: Function,
  										useCapture:Boolean = false): void
  	{
  		_bindingEventDispatcher.removeEventListener (type, listener, useCapture);
  	}
  	/**
  	* @inheritDoc
  	*/
  	public void willTrigger(type:String):Boolean
  	{
  		Return _bindingEventDispatcher.willTrigger (type);
  	}

• Data binding for Idiots (myself)

  Hey everybody,

  I was asked to create a form that is much more complex than anything I've done in the past. I just wanted to ask a few questions to the experts here before I'm begins, to make sure that I don't make any huge mistakes.

  The complexity of the form lies in the multiplicity of repetitive nested subforms, the fact that it is three forms (which projected form depends on a selection in a drop-down list), and the fact that the form must be designed to export its data such as xml.

  The extent of the building, the form will, I'm comfortable with everything except for export in XML format. I've done a few times, but I'm not sure that the assumptions I made are correct. I tried to read the help files, but I'm not sure I want to come.

  Roughly, I use a ton of subforms to ensure that the layout of the form works dynamically. I don't want all these subforms is displayed in the xml import. The way I do it is to affect the data binding on the subforms "No data binding." Does have an impact on the way that data is stored in the form? If I don't want the value of a field to export, I can put it is linked to "no data binding", or this issue will prevent the values being recorded?

  My last question concerns the link "Use name". So far, in forms I made so that all fields have different names. This form is so large and has so many similar elements, it would be useful to resue field names in different areas of the form. For example, two versions of the forms has a section for the associated addresses. The fields in these sections are the same. I can name them the same thing, as long as they are in different subforms? Or it will cause a conflict when the export/backup.

  Sorry for the long post. In short:

  (1) what the "no data binding" binding afftect data have on subforms and fields, regarding the data saved and exported data? Is there any 'traps!"that I should be aware of?

  (2) what are the guidelines I should follow to make sure that I do not come across all naming conflicts? I just need brother fields are not named the same, or all names are separate?

  I'd appreciate any help that you guys might be able to offer.

  -Scott

  Scott,

  (1) no mandatory date refers to a form object is not included in the exported XML file. Data binding has no effect during the recording of data when you save a form, the form contains the data.

  (2) for me, the #1 rule is use a schema and a schema binding. It is worth the initial investment in time. What you see in the diagram, this is what you see in the output data, given the form object is bound to the schema. You can link an element of single to multiple form objects schema if you need to re - use data through forms, too. Rule #2, for me, is to explicitly set the names sub-shape to simplify the schema binding and to avoid name collisions.

  I have attached a very simple form (with the built-in schema), schema, and the exported xml file to show.

  Steve

• Using the data binding on each button in a ToggleButtonBar

  Can someone tell me if it is possible to use the data binding on the individual buttons in a ToggleButtonBar and, if so, how?
  
  I want to be able to use the data binding for each individual button in the ToggleButtonBar 'enabled' property, but is not possible using MXML because the ToggleButtonBar takes a data provider to display labels for each button and, obviously, I can't set the "enabled" on the values of dataprovider property because they are not objects Button. For example, I'm not allowed to do something like this:
  
  < mx:ToggleButtonBar id = "tbb".
  toggleOnClick = 'true '.
  itemClick = "clickHandler (event)."
  creationComplete = "tbb.selectedIndex = 1" >
  
  < mx:Button label = "A" active = "{...}" / >
  < mx:Button label = "B" enabled = "{...}" / >
  < mx:Button label = "C" enabled = "{...}" / >
  
  < / mx:ToggleButtonBar >

  Ah! The ToggleButtonBar. Liaison. MXML. mysterious. Not obvious. But yes, we CAN do...
  First, you will need to get the buttons to toggle. Did you know that they are actually ButtonBarButtons? Once you get an instance of each of them, you can do the binding in MXML.

  Each button LINK below the ViewStack is bound to a ToggleBarButton.
  When you click a related button below, the LINK button above it will have its enabled enabled/disabled property. Then a link fires, setting the enabled property of the related ToggleBarButton.

  This example requires that you know advance how toggle buttons and buttons, you have, so it will not evolve well. Whenever you add a button, you will need to enter hard in the 'getButtons' function, which implements the ButtonBarButton instances. But if you have a known quantity of buttons, no problem.

• How to use the data binding on a cluster?

  Hello

  I just discovered the data binding and used it on some primitive controls/indicators. I love the cleanliness of the approach (no additional querying and son required!)

  Now, this page gives to think I can link a cluster with a shared too variable. However, when I right click-> properties, I see that the tabs appearance and Documentation (and I know that I did not accidentally choose an element inside the cluster, because (1) there is a typedef strict, and said the title of (2) 'The Cluster Properties' dialog box). Where can I find the data binding tab?

  Thank you

  Hi JKSH,

  What you're doing is possible if you make the file .ctl as the definition of type rather than a strict definition of type. With a strict definition of type all instances of the same .ctl file link that is why you cannot use data binding.

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• Receive 'database is locked' or "database is null or closed" when inserting the data.

  Using a Bold 9700 device and 9700 OS JDE 5.0.0 Simulator, I found that when I insert data in a loop, I'm back is:

  1. 'database is locked'
  2. "database is null or closed"

  Maybe it's in my design the way I am inserting data, because I am inserting data in two tables in a SQLite database since in a loop and nested loops.

  I have JSON data that looks like:

  "product": {
  "id": "3459200",
  "label": "coffee",
  "brand": "Folgers"
  "distance": "local",
  "flavors": [
    {
        "aroma": "Hazelnut",
        "id": 10,
    },
    {
        "aroma": "Columbia",
        "id": 12,
    },
    {
        "aroma": "French Vanilla",
        "id": 14,
    }
  ]
  }
  

  Values produces JSON objects, id, label, brand, and distance to go in a single table. The values in the array JSON flavors go in another table, as well as the id.

  Therefore, I have a table that has:

  • product
  • ID
  • label
  • brand
  • distance

  Another table:

  • aroma
  • ID
  • fk_id

  When I loop through the JSON data, I am currently:

  1. Open a database connection
  2. Perform the insert in a while loop for JSON objects
  3. Use a loop through the JSON array and passing nested in the database, a connection
  4. Leave the nested loop
  5. Exit the loop
  6. Close the database connection a finally statement.

  I don't:

  1. Open a database connection
  2. Perform the Insert
  3. Close the connection of database for each JSON object and the JSON object in the JSON array.

  Is what I do now correct or is there a better way to insert in the database and to manage effectively the database connection in order to avoid the 'database is locked' or "database is null or closed" message?

  Thank you.

  Almost...

  The call to close can be eliminated completely.  If you want to call it, it will have to be outside the loop.  The following link explains.

  Cursor.Close () closes the statement used to create this

  http://supportforums.BlackBerry.com/T5/Java-development/cursor-close-closes-the-statement-used-to-CR...

  You can find sample code for multiple inserts here: http://docs.blackberry.com/en/developers/deliverables/8682/CS_creating_a_parameterized_SQLite_insert...

• Lightroom: Export with all the metadata includes the objective data

  When I export photos from Lightroom to photo site appears all the EXIF metadata, but not my lenses. Lightroom recognize my goal, but when I export image with the option "All metadata" the objective data is not exported. Why? Maybe not important but I want to get all the metadata with my photos.

  

  Hello!

  There must be something else, perhaps with the importer of photo website? When I export with the option to include all the metadata info from the lens is also included. It is usually written by the camera in EXIF fields data. Sounds like your camera is written this info since Lightroom can see it.

  

  If you have another application of image processing (you camera manufacturer, Preview, etc) see if a file exported from that behaves the same way when you import into your photo site.

• ADF table with checkbox refresh data binding problem

  Hello.
  
  I use JDeveloper 11.1.1.3. I need to use the table with checkboxes in each row of the table in my project. I use VO with transitional 'Selected' attribute that has a boolean type.
  Everything works well, wait one thing:
  When you click checbox with valueChangeListener and try to get the selected line in the managedBean you won't get any selected lines. After selecting second maaged bean evil shows that 1 single line is selected. It's my managedBean method:
  
  public void SelectCountyClick (ValueChangeEvent valueChangeEvent) {}
  
  DCIteratorBinding it = ADFUtils.findIterator (ITERATOR_NAME);
  
  int selectedRowCount = 0;
  RowSetIterator laughs = it.getRowSetIterator ();
  Line r = rit.first ();
  If (r! = null) {}
  If ((Boolean) r.getAttribute ("Selected"))
  selectedRowCount ++;
  }
  
  While (rit.hasNext ()) {}
  r = rit.next ();
  If ((Boolean) r.getAttribute ("Selected"))
  selectedRowCount ++;
  }
  
  System.out.println ("selected all THE LINES:" + selectedRowCount);
  
  
  }
  
  I tried to change this event to the client event, I got the line number, I put 'true' or 'false' to the code data binding, but whenever I can't correct data after the value change event.
  
  Please help me.
  
  The latest idea is updated databing after click of checkbox, I think. Please help me.
  
  Thank you!

  You must go through the concepts of life cycle of page ADF. In simple terms the Boolean value in the model is not defined in valueChangeListener. Try adding (.processUpdates) valueChangeEvent.getComponent (FacesContext.getCurrentInstance ()); on top of your listener method and see the effect.

  Reference:
  http://docs.Oracle.com/CD/E15051_01/Web.1111/b31974/adf_lifecycle.htm