The computer hangs when copying the data on the hard drive

Similar Questions

• Windows Explorer hangs when copying large files on external USB drive

  I'm trying to copy files over 1 GB of my pc to a WD MyBook external drive. After about 10% on the progress indicator, Windows Explorer crashes. When I cancel the work, nothing happens until I unplug the USB. Then I have the pc returns to normal.

  During my research, I discovered that a lot of people have this problem. I have tried many suggestions, but without result. The last thing I tried was a full format the C: drive with a fresh install of Vista. Copy a large file gave me the message 'Calculating time' infinite. After you have installed SP1 reappeared the problem as explained above.

  Some of the things I've tried:
  check the external hard drive: no problem found and the problem occurs on all my MesLivres 3
  safe mode
  Superfetching disabled
  update the motherboard bios

  Now my last request resource helps professionals. If I don't find a solution I'll have to go back to XP, achieve Win7 or one rating for Mac... a lot of things to think about.

  Best regards
  Rafael

  Try to copy in safe mode. If can be a slow usb port. Try anther one.

  Good luck.

  Exp. comes from http://www.computerstar.ca/

• My vista computer hangs when I right click on the screen and scroll again.

  My vista computer hangs when I right click on the screen and scroll again.  I guess it's a problem with the windows Explorer.  I ran virus and malware scan and also led the sfc.  I always get the same result.  If anyone has faced this problem and knows the Fox please help

  It could be a problem with the shell extensions.
  Check out these links to see if they might be able to help:

  Make a right-click is slow or weird behavior caused by context menus managers

  and

  ShellExView - Shell Extension Manager for Windows

• Computer do not normally sleep wake up and the computer hang when external USB devices are connected

  Hello

  I have a Windows 7 Home Premium 64-bit desktop CyberPowerPC, and there are currently two problems with it:

  1.), I have two USB ports in the front of my case. I am connected to my computer. Then I tried to connect my external hard drive using the USB cable supplied with it, but just at the moment where the end of the USB cable touched the port, the screen is black and automatically rebooted and froze when the display shows the brand CPU that is before the login screen. I actually press the restart on my case button to restart the computer with the hard drive already plugged. Then everything should work normally.

  It's the same thing when I tried to connect my iTouch 2nd generation.

  This problem occurs sometimes, however, but I wonder if someone always has a solution to this?

  2.) whenever I put the computer to sleep and he remains asleep for a while and I turn it on it once again, powers for about 2 seconds then it turns off. I have to turn the power supply and light in the order so he could get out of mode 'sleep'.

  I was wondering if you have solutions to this problem, as well.

  Thank you.

  Original title: new Windows 7 problem

  Ok.. I'll try again...

  The problem is caused by a bad 'ground' between the USB ports of the case and the motherboard. Static electricity is originally the USB device to short on the USB port which is originally the motherboard restart mode.

  I had the same problem and got my computer case exchanged. The problem has not entirely disappeared, and I use the USB port on the front on the card reader, just in case.

  It can also be a problem with the power supply or even the motherboard. It is very difficult to locate the failure without replacing in turn, a process that happens to be a bit expensive.

  The above is the reason why I recommend that you contact the MANUFACTURER. Don't take no for an answer off the manufacturer or supplier. It is a problem annoying which can eventually damage your operating system if it is enough...

• recover data from a hard drive from the old computer

  my windows 7 computer motherboard is dead I replaced it with a computer of windows 8. I pulled the hard drive from the old computer and transformed into a USB external hard drive, when I tried to copy the files of personal data (access denied) how can I get my data

  http://support.Microsoft.com/kb/2623670/en-us#method11

• When it transfers data to the microcomputer by Uart, USB etc PC, it must either be aware access to the hard drive of the PC or not?

  I want to know when it transfers data to the microcomputer by Uart PC, USB etc., it must either be aware access to the hard drive of the PC or not.
  When the Windows operating system run my programs, hard drive is accessible when there is a space of memory?
  For example, virtual memory method return page-by-page, page-out using the drive hard when memory is used in full.
  I am using Windows 7 Home Premium 64-bit. The access to my PC hard drive light flashes even though I don't run my program.

  The lamp for the drive starts flashing as the computer is running and programs are running. Windows is a program that runs all the time and access the hard disk.

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• OK, I did something "stupid." The hard drive on my computer was full so I copied my pictures to a removable hard drive. Then I deleted them on my mac. I also wanted a new installation of LR, so I uninstalled that too. I reloaded LR and reloaded my drink "

  OK, I did something "stupid." The hard drive on my computer was full so I copied my pictures to a removable hard drive. Then I deleted them on my mac. I also wanted a new installation of LR, so I uninstalled that too. I reloaded LR and reloaded my 'catalogue', but I don't know how to do so that he can look at the pictures on my external HD help!

  wendyh81856794 wrote:

  Oh, okay, I think I got it. If the folders on my computer with the? Use the LR 'catalogue' on my computer, and when I reconnect them, LR uses the 'catalogue' on my external hard drive?

  No Lightroom does not use a different catalog.

  We discuss records, are we not? In the original catalog, you have a folder with one? mark, say C:\Photos, and you used your operating system to move it to F:\Photos. Lightroom has this record showing under the C:\ drive. As soon as you make the reconnection, Lightroom indicates the folder in the drive F:\.

  Oh, and is there a way to do all the files at once? or what I need to do one at a time?

  See Figure 4 and the corresponding text in the document I linked to.

• How to copy a catalog of external hard drive to the hard drive of the computer to use smart insights not connected to the external hard drive?

  I am very new to LR5. I put LR5 in place so that my catalog and photos are on an external hard drive. I discovered that when not connected to the hard drive, LR5 can't find my catalog, therefore, I can't do any editing in intelligent insights, unless it is connected to an external hard drive. How can I fix this so that I can edit photos without being connected to an external hard drive. Is it possible to copy the catalog out of the hard disk on the computer's hard drive or I have to re-establish a new catalog using LR5? Must the catalog always be loaded onto the hard drive? Thank you in advance.

  Yes that's correct. The LR catalog must be on the computer's internal drive. Then when you have smart previews activated you can change the image without going through the reader that they are connected. When you connect this drive images will be updated.

  Simply COPY these 4 folders on your internal drive in a folder called Lightroom catalog that you create. Then open LR and go on the file menu point and select open catalog. Navigate to the folder you created called catalog in Lightroom and select the Lightroom Catalog.lrcat 5 file and click Open. Once restart Lightroom open change preferences, > preferences, and under the general tab, in the catalog default section make sure that "when starting to use this catalogue:" listings in the area where you copied the files. Something like Macintosh HD/Wherever, have created it this folder/that folder name/Lightroom catalog.lrcat 5.

• Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if the make

  Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if do leave LR or my car, I get the message; "Disc burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone can find out if there is something I can do. Or could it be that my computer just can't handle it? Help! So frustrating!  I have a Lenovo PC, I don't know if that makes a difference. Any ideas? Thanks a lot for your help!

  You burned discs with other programs using this computer? Are you sure that you have a drive that will burn the disks?

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• How can I block access to the hard drive to windows when the computer is blocked?

  When I leave the computer on and 'blocked' option it accesses the hard drive and "work like crazy. Simple I want to block all the software to access the disk hard until I connect again.

  I want the computer to be available on the network, but does not.

  Thank you

  Sorry, but that is simply not possible.  Each computer doing something, if you're connected or not, each tick every millisecond it's on.  If you could freeze the process somehow, you would also freeze the processes and services that would allow you to access the network. Better, we advise to leave it alone, lock to prevent others from accessing and then do what you need to on the network.

• I'm telling my legal copy of Indesign CS adobe @, but tells me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under the terms of the license, I could put on my laptop and keep

  I'm talking about my legal copy of Indesign CS2 adobe, but told me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under license, I could put on my laptop and keep a copy on my PC at home as long as I don't have use both at the same time. None of these computers no longer exists. And why adobe cannot say that it was me who did the first activation?

  It won't matter because your copy of CS2 and serial number no longer works.  You need to acquire a special version because of the Adobe stop the activation for CS2 server and other products of this period.  The links below will explain more and also drive you to the download version, you must get and the serial number, you can use for this.

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number.

  Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?

  Hi Uri,

  Please click on the link below and contact the Adobe Support via chat.

  Contact the customer service

  Hope this will help you.

  Kind regards

  Hervé Khare

• After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After having read a few tutorials, I suspect this deactivation were not made before

  After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After reading some tutorials, I'm suspecting this disabling was not made before reinstalling... Recommendations on resettlement in this case?

  You actually have a renewal LR5 problem or ask yourself what you need to do?

  Download and install the update LR 5.6 from here: http://www.adobe.com/downloads/updates

  Enter your LR 5 serial number and you should be ready.  If something doesn't work, then, please describe the problem in detail.