Problems with the removal of the data binding Flex to use Air 14

Similar Questions

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• Problem with the DATA types, in a UNION

  Hello
  I m trying to disply a custom message when no data found using the structure below. Unfortunately I ve you have a problem with the data types I im trying to union
  I tried different types of data in the 2nd SELECTION tool but the rest of the problem. Help, please.
  
  SELECT HOSP_NAME 'HOSPITAL' DOC_SUR 'NAME', 'NAME' DOC_NAME, d.DOC_ID ID, diagnosis
  H., DOCTOR d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1
  
  UNION ALL
  
  SELECT TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), 0
  OF THE DOUBLE
  If NOT EXISTS (HOSP_NAME 'HOSPITAL' 'NAME' 'NAME' DOC_NAME DOC_SUR, d.DOC_ID ID, diagnosis
  OF ΝΟΣΟΚΟΜΕΙΟ h, ΙΑΤΡΟΣ d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1);
  
  
  ORA-01790: expression must have same type of data, matching expression
  01790 00000 - "expression must have the same type of data, matching expression.

  DOC_SUR 'NAME' DOC_NAME 'NAME', ID d.DOC_ID, HOSP_NAME "HOSPITAL", diagnosis

  What is the data type for these columns

  To_char('test'), to_char ('test'), to_char ('test'), to_char ('test'), 0

  What you're doing here 'test' is already a character. Why do you use TO_CHAR?

• problems with the date picker

  I found some problems with the date picker to make my first presentation of object BPM.
  
  I created a group with a datetimestamp it contains. When I click on it in run mode, it will bring a new tab in the browser. This behavior is different from that of a date picker outside a group where there just a small javascript popup.
  
  Anyway around this problem?
  
  Also, would be nice if could be set by default to the current date. is there a way to who?
  
  For the component "time" it seems impossible to define the default value - at least on the tab object structure.
  
  Thank you

  Try to set the property "DHTML" to control date Yes. This option is under the Properties tab-> the calendar section. This will force it to use the popup javascript on screen instead of opening a new browser window/tab.

  To set a default value for a date/time, you can simply set the value in the constructor of the BPM object in which the property is located.

• Problems with the date in the procedure on Oracle 11 g

  Hi gurus,
  
  I have some problems with the date under Oracle 11 g format.
  
  Let me explain the situation:
  
  When I start such a request
  Select to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'))
  of sys.dual
  
  I had as a result 2009 under the number.
  
  When I do the same thing in a procedure of a package like this
  
  my_year: = to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'));
  
  the my_year variable contains the value 9 instead of 2009.
  
  Can someone explain to me what goes wrong?
  
  I just tested with the evolution of the variable nls_date_format of environment for the session and the database is complete without success.
  
  Kind regards
  Björn

  Yes, it has everything to do with your environment settings.

  SQL> set serveroutput on;
  SQL>
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01-MAR-98
  
  PL/SQL procedure successfully completed.
  
  SQL> alter session set nls_date_format = 'dd.mm.yyyy hh24:mi:ss'
    2  /
  
  Session altered.
  
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01.03.1998 07:00:00
  
  PL/SQL procedure successfully completed.
  

• I have a problem with the installation of ADOBE ILLUSTRATOR using creative cloud. It gives me:

  I have a problem with the installation of ADOBE ILLUSTRATOR using creative cloud. It gives me:

  Exit code: 117

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 0 warning (s)

  FATAL: Fatal Error ' 117' occurred in download

  FATAL: An error has occurred in the download package (name: AdobeIllustrator19-Core Version: 19.2.0.111). Error code: '117'

  -------------------------------------------------------------------------------------

  N ° 1)

  Click on the below link, Sign In and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements

  Note: * If we do not keep the page of items in Photoshop, we will have access denied error message when file downloading install direct.

  Then click on the link below and download the installer directly mentioned in step 2.

  Step 2)

  
  

  http://prodesigntools.com/trials3/AdobeProducts/ILST/19/Win64/Illustrator_19_LS20_win64.7z

  Step 3)

  Unzip the installer using 7zip or winrar and then install the product.

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• problem with the data record

  Hi, I'm new to LabView so I know that the thing I'm doing is relatively easy, however, I'm stuck.

  I made a small program that gets 5 steps (for now replaced with random numbers) and as well as the date and time data in the text file. I intend to run the program for long periods of time, so I want to increment the file name/path every hour, but after the addition of this part of the program does not create any file, although the program runs without error.

  Block diagram is attached, could someone point out to me what is wrong and what I should do to reach my goal?

  Thanks in advance!

  Hi marcis,.

  Acually, the logic of the program was completely wrong.

  1. your comments the file path will never help you. Because after leaving of while loop, the structure of matter will run once and LV will stops running.

  2. open and close the datalog only once file. Try to make all your manipulations between opening and closing your file datalog. Otherwise, it will be difficult to manage when you develop your code.

  3 case construction outside the loop is meaning less. If you want to run the program permanently, place all functions inside the while loop you want to run. While the loop will run continuously until you get satisfied.

  4. incorrect data streams. All programmers need well with the data stream.

  Just go into the basics of labview here and try to realize your logic again

• Problems with the WEB BROWSER blackBerry Smartphones, use not wifi network to open some Web sites

  Hello I'm owner of BB BOLD 9900 OS 7.1... for the last two days I am facing a pretty annoying problem with the BB browser.

  It means not affects the device... it just annoys me.

  When I TURN ON my WiFi on my BB with the network carrier Sim already homepage active who has a Active on it and open the web browser BB, according to the website on which I open the web browser chooses between the internet Wi - fi OR internet BIS carrier which is weird. BECAUSE a default if the wifi is enabled, then the web browser MUST use internet wifi network carrier for navigation. YOU TUBE, FB and TWITTER.com all use my carrier netwrok to open bt soon I open BBC.com or CNN or any other site the wifi symbol appears on the right side and so it uses the wifi network... and disappears when I opened THE 3 SITES you tube FB n twitter.

  My knowledge is that when you activate THE wifi network, the WEB browser is intended to USE the wireless internet, NOT the internet carrier

  The next time I switchd off the the carrier signal, and then Turned ON one internet WI - FI and then opened the web browser of BB. so now all the opend website with wifi internet bt as soon as I open YOU TUBE or FB or TWITTER.com it post a comment... .that cannot visit the web page when the carrier is off. Please turn on the radio n try again... I mean IT SHOULD OPEN with internet wifi? WHY do network carrier sim to open the web page?

  I have checkd my browser settings and they are default and also my wifi settings I have reset the... the problem still persists?

  any idea wats going on?

  Please help is needed I'm annoyed about this problem...

  Thank you

  MR. KIWI... Good news... .i went to my carrier service center... Solvedo Problemo!

  Go to your service books and remove directories of service WAP browser in all directories of service WAP 3 I don't know the exact name, but all are related to the browser... WAP config something like dat... Just remove dem... .and HARD restart your fone... and try to use only wifi on your device with your carrier network off...

  mine worked... Let me know on urs... so now, the browser uses my wifi instead of my network provider when both are running...

• We get an error "there is a problem with the device' while trying to use it on the computer of Windows 8

  Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/getting-an-error-theres-a-problem-with-your-camera/9c494984-1178-4C3F-884c-80ac750d3fa6

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.

  If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• There seems to be a problem with the soft ware.  We use the CS6 for Records services and when we try to save the record, part of the record is stored. The record to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are generally

  There seems to be a problem with the software.  We use the CS6 for Records services and when we try to save the record, part of the record is stored.  Usually the recording to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are recorded.  What should I do to fix this?

  You may need to reset your preferences of hearing files stored in C:\Users\"username"\AppData\Roaming\Adobe\Audition\5.0. If you rename this folder in 5.0.bak that hearing won't find it when you open the next time if it will recreate a new settings with the default settings folder. See if hearing then works as expected.

• 5 d Classic - problems with the Date of creation on the files

  I use Bridge CS5 v 4.1.0.54 and am having a problem with my 5 d classic, where some of my photos are dated correctly, and then some are dated as 11 hours later. They were all kick the same camera and same lens (no), a few seconds apart. Date information only appear to be incorrect in Bridge and are therefore sorted incorrectly, making it difficult for the workflow. However, I still have the pictures on my camera, so I took the CF card and examine its contents in Windows. In this case, all dates seem to match and be consistent. I posted in other forums, and most have suggested that there is probably a problem with Bridge, ACR, or Photoshop.

  I have provided links below for an example of images with different info Date created by bridge and then the correct information of the Date of creation in Windows when you view them on the map see

  I saw cela in at least two different scenarios recently. Haven't looked through all of my recent photos still to say whether or not it's got more than that.

  Any help would be appreciated.

  Thank you

  Jamie

  -Adobe http://www.jamiegphotography.com/portals/0/images/datecompare.jpg

  -Windows http://www.jamiegphotography.com/portals/0/images/PhotosWindows.jpg

  Have seen the problem before.  Two things to try.

  1. empty the cache in the folder with the bad weather (Tools/cache/purge cache folder xxxx).

  2. read this link http://forums.adobe.com/thread/854763.  The guy is from Austrialia and concluded that, after a certain time bridge labled it the next day.  Where are you from?

• Problems with the data store when installting ESXi USB

  I had problems getting free ESXi reliable running.  I am able to install a flash drive fine and initially everything works and I am able to create virtual machines.  Upon the first connection to vSphere, told me that there is no data store, so I create one on my controller LSI 400 GB RAID1 8308elp without problem.  However, once I reboot the server ESXi I lose the data store.  When I check my warehouses under Configuration it is listed.  At this point, if I try to create the data store, yet once I get "Error during the configuration of the host".  I read about using fdisk from the console when people have had this problem but there is no access console in the free version.  Is that what I can do to work around this problem?

  Right in the HCL... SAS/SATA-RAID of the lists for older versions, SCSI for the current version... Search within i/o devices for "LSI 8308elp '...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Problems with the data merge

  I created a file in excel with 966 lines all in column A. I have saved as a txt file and created an Indesign document with 966 pages.

  In the InDesign file, I put in place a text box with the font and size, I wanted then he centered in the document. When I do the merging of data in the master page shows only the text of row 2 in every single text box on each page.

  I tried searching and tried the other boxes and do not master pages. Why can't I get my text to display in the order in all pages?

  If I send someone with screenshots or call someone for a step by step which would be very useful.

  Thank you

  Peter

  Line 2 is selected, because the first row should be used as a header that describes the content.

  With regard to the merger itself, you have no need create a 966-page document. Create a document 1 page with your domain in place, and then perform the merge. InD will create automatically 966 pages, or as many as it takes to use all the data. If you want all in the same document, I wouldn't put the merge field in the master page, but on the page of the document instead.