Dreamweaver CS 5 do not support static variables PHP 5.6?

I don't know what you mean by variables PHP 5.6. I just checked the online PHP manual, static variables are available since PHP 4.

I also checked some PHP 5.6 features, such as constant expressions and functions variadique in Dreamweaver CC 2015.1. As I suspected, the built-in syntax checker does not support. To my surprise, the latest version of Dreamweaver does support the syntax PHP 5.5 . The syntax checker currently supports only PHP 5.4.

As when Dreamweaver support the syntax PHP 5.6 or PHP 7.0, Adobe can only say. I'm not an Adobe employee, so I don't know.

Tags: Dreamweaver

Similar Questions

Dreamweaver CS 5.5 not supported mode Design for Razor html files.

Hi team,
Dreamweaver CS 5.5 not supported mode Design for Razor html files. I made the changes of configuration, as shown in the forum extension.txt and MMDocuments.xml files, still the error persists. Suggest a work around.

I never heard of Razor html files, but a quick search on Google gives that the razor is used with ASP.NET. Support for ASP.NET has been omitted in Dreamweaver CS4.

Anchor WLC in DMZ, FW does not support mulit-static Rts.

Hi gang,.

Not looking for someone to hold me hand, but you can use some advice.

We work through our deployment of a WLC guest. Our WLC anchor is in our DMZ.

Management and the AP Manager are on the same subnet. The dynamic interface "VLAN" is on a different subnet from the other interfaces, and its Portal is the DMZ Firewall interface.

Problem, the firewall does not support multiple static routes.

Always do the management and dynamic interfaces must be on different subnets?

Someone at - it experience with this type of configuration?

I understand the value of the time, if I appreciate honestly all help I get.

Best regards

Larry feet

Just to clarify, we're talking wireless access visitor right? Wired not invited?

Wired allows you to create a custom in a vlan port specific necessary (but not when you configure this on the controller of anchorage)

In any case... just make sure that the WLAN you want to dock is configured the same as on the controller of the DMZ. Make sure you anchor this controller to the DMZ and make sure you anchor the wlan dmz to himself.

CC of Dreamweaver not supporting Windows Vista but Photoshop CC's?

Adobe Dreamweaver CC does not support Windows Vista, where, as Adobe Photoshop CC's? I mean, should not support the same thing? Is it because of the build type or something? But what really bothers me. Please let me know if there is a different version of Adobe Deamweaver that I can download, which supports Windows Vista too. Thank you.
-Murtaza

Hey Murtaza,

Applications of CC are tested on Windows 7 and later. Please take a look at the links below for the CC, CC DW and PS CC tech specs.

http://www.Adobe.com/in/products/creativecloud/tech-specs.html

http://www.Adobe.com/in/products/Photoshop/tech-specs.html

http://www.Adobe.com/in/products/Dreamweaver/tech-specs.html

Thank you

VIANEY Gupta

DMA between host and target FPGA is not supported for this remote system.

I try to cover with my FPGA (on the cRIO-9002) of the RTO. I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

Possible reasons:

NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

We have also a 9012sitting around will using this cRIO rather solve this problem.

I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

Access the static variable...

Hello

I need a static variable which holds a QMap, for this example I'll use QMap.

I created fresh new project and I changed in applicationui.cpp:

...ApplicationUI::ApplicationUI(bb::cascades::Application *app) :
        QObject(app)
{
....

    initDatabase( 1 );
    initDatabase( 2 );
    initDatabase( 3 );
    initDatabase( 4 );
}

bool ApplicationUI::initDatabase( int index )
{
    QString database = QString( "Db%1" ).arg( index );
    QString value = QString( "data/db%1.sqlite" ).arg( index );

    ApplicationUI::m_databases[database] = value; // undefined reference to `ApplicationUI::m_databases'

    return true;
}

ApplicationUI::~ApplicationUI()
{
    if( ApplicationUI::m_databases.count() ) // undefined reference to `ApplicationUI::m_databases'
    {
        foreach( const QString &key, ApplicationUI::m_databases.keys() ) // undefined reference to `ApplicationUI::m_databases'
        {
            QString db = ApplicationUI::m_databases[key]; // undefined reference to `ApplicationUI::m_databases'

            qDebug() << "Closing [" << db << "]";
        }
    }
}

and in applicationui.hpp:

...

class ApplicationUI : public QObject
{
    Q_OBJECT
public:
    ApplicationUI(bb::cascades::Application *app);
    ~ApplicationUI();

    static QMap m_databases;
    bool initDatabase( int index );
...
};

#endif /* ApplicationUI_HPP_ */

As you can see commented in the code above, I get error:
no reference to 'ApplicationUI::m_databases' applicationui.cpp

I thought to access static variables that ApplicationUI::m_databases would work.

Can you please guide me here.

Kind regards

Andy

Hello! That's what I saw:

(1) #include is present in the header file?

' (2) ' void ' is the syntax error:

void MyClass::~MyClass()

static QMap variable;

is a declaration, you also need to create the variable in the .cpp file. Add to the .cpp:

QMap MyClass::variable;

MyClass::variable["one"] = "value One"; // doesn't work...

"MyClass:" is not necessary. ['a'] variable should work too.

UPD: this compiles (I replaced QMap QString with std::map with std::string for quick test):

#include 
#include 

class MyClass
{
public:
      MyClass();
      ~MyClass();

      void someMethod();

      static std::map variable;
};

std::map MyClass::variable;

MyClass::~MyClass()
{
     // do some cleanup... using MyClass::variable, doesn't work
}

void MyClass::someMethod()
{
     variable["one"] = "value One"; // doesn't work...
}

int main(void)
{
        return 0;
}

Creation of some of the problems [does not support VFR]

The software does not support the VFR, only supports CFR, but most people use VFR, so I want the software to support VFR
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]

As far as I know, no first version has never supported video rate Variable

This has been asked several times, and Adobe has never changed from first

You can convert in constant rhythm with https://handbrake.fr/ opensource transcoder/converter

Lumix FZ1000 / 4K video not supported by first 14 elements?

Hello
I just had a discussion with the experts, but I can't believe what they told me!
My problem, such as reported to them: I am working with sequences Adobe first 14 and 4 K of my Lumix FZ1000.
First can not play my clips correctly: there are stills, broken photos, formwork...
Codec: mp42 (mp42/avc1)
Response: I'm sorry for the device that you are using is not supported by Adobe Premiere Elements. Please refer to this article for more details.
Can anyone help?
If all goes well,
Anita

I don't have the same device, but they have two Panasonic cameras that shoot '4K '.   I have no trouble editing the clips with the Prime Minister 13 items and suspicious that there is no difference if I upgraded to 14.

When 14 was introduced there was a description of marketing that said it would modify video from the cameras 'like' a little on a shortlist. He did not limit the support to these a few cameras. In fact, the opposite is true. I know a few "consumer cameras" which takes clips from 4 K that can't handle the elements of Prime Minister.   An exception is the NX1 Samsung that uses instead of the more common H.264 H.265. There may be some cameras that can shoot variable frame rates (for example, some early GoPros) which may require an extra step of treatment. Other than that, if your Sony or Panasonic says '4 K' on the box, you can expect elements of Prime Minister to work.

Processing power is a challenge that must be overcome.   Nothing in the world consumption works a more difficult computer video editing (or perhaps game).   Software video editing of all brands have "minimum obligations." If you have a minimum computer, you can expect installation of video clips with smaller settings on any camera. If you plan to shoot with the highest quality of 4K, you will need a PC range to be able to do it with any efficiency.

Error - exception error not supported for user - Help!

Hi all
I get an exception error unsupported to the user in a part of my page is refreshed after encountering a validation error. Validation is managed properly, but when the page is refreshed to display I get an exception error not support for the user for the following code (generates the value of the element on the page):
< code >
Select nvl (sum (po_details.po_det_amt), 0)
of po_details
where po_details.po_id =: P230_PO_ID
and po_details.wbs in (select distinct wbs_number_id of wbs, project
where wbs.vendor_id =: P230_VENDOR
and substr (wbs.wbs_number_id, 1, 6) = project.wbs_sequence
and project.project_number = nvl (:F101_FPC_NUMBER,project.project_number));
< code >
When the code retrieves a single value, the following post calculation calculation of:
< code >
to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');
< code >
Generally, the process works. It is only when a validation run which prevents the removal of a purchase order that I encounter an error during a refresh of the page. I get an exception error unsupported to the user for this calculation. I'm puzzled.
Any ideas?

to_char(:P230_PO_AMT_FPC,'FML999G999G999G999G990D00');

AFAIK - all within the APEX bind variables are of type VARCHAR2

That means - you are implicitly expressing a string to a different data type just to cast to a string.

So: this code is completely useless and adds more complication to the mix only what you need.

It is very possible that Oracle is trying to convert a DATE... (which will fail)

I put either the FORMAT for the type of element to match what you need or make the conversion from the string in your SELECT statement.

for example

Select to_char (nvl (sum (...), 0), "FML999G999G999G999G990D00")

If you still get a 'user defined error', it is likely to be lifted since within the procedure used to remove the PO.

See the DEBUGGING within the APEX pages to check exactly where the error is thrown.

(it sounded like you already did and have reduced in to_char() section)

MK

Display static Variable for the title.
Hello
I have defined a static variable Bank with the value of "Bank of India" in 10g and must mention that in the title. How to set the variable in the title. valueOf ('Bank'), @{biserver.variables ['bank']}, @{'Bank'} do not work, then how?

Thank you
Anitha.B
check with this one - @{biServer.variables [' name ']}
the variable name must be in a single quote.

Pls mark if this can help...

Does not support the french characters in UTF - 8

I use adobe flash 3 jacquard all coding in action script 2.
I have the xml file of the french language, I want to display the content in flash player. I used UTF - 8 for encoding. But my character from french coding does not work. How to show the french language character as the character " e "? I used ' & eacute; ' for ' e 'characters in UTF-8. " But shows exactly what I encode & oacute;. Is it possible to support the character encoded in xml? then, he could show in flash player language french.
My French language xml file is attached with this post.

I hope you mean that you use Flash CS3? because Flash 3 is more than 10 years and does not support AS2 or unicode AFAIK.

Assuming you are using CS3 and your XML file is correctly saved in UTF-8 format. Then, the usual problem is that the special character has not been integrated into the text field or that police did not have this character.

But first of all are you sure the file is saved in UTF-8 format? I ask because a lot of people come on these forums and say that their file is UTF-8 and we are working on it for a few days and in the end, they discover that it is not. Just add the tag to UTF-8 in a text file header does not UTF-8. Any program that created the file must correct support of UTF-8 encoding.

You don't need to do any special escape or convert the character in html code. If it is unicode just type the character normally. And save your XML file.

The next thing to check is if Flash reads correctly character. You can do this in a number of ways. What I usually do is to have the code that reads the XML and then either draw the nodes since the onLoad handler. Or in the test environment I go to the Debug menu and the "list of Variables". That displays all variables and their value. If the character is displayed correctly in the output window so you know that the file is coded correctly and that Flash is read properly and that the problem must be with the textfield and embed fonts.

If the character is not just in the output window, then you know that the problem is with the text encoding.

ORA-12703: this character set conversion is not supported
Hello

STH wrong here, can someone please advice what should I do?

You can see the details below,

Thank you

RMAN > RUN
2 > {}
3 > SET until TIME ' to_date (May 24, 2010 18:00 ',' DD-MM-YYYY HH24:MI:SS') ";
4 > RESTORE database;
5 > RECOVER DATABASE;
{6 >}

executing command: SET until clause

From restoration to May 25, 10
using channel ORA_DISK_1

creation of data fno = 6 name file = D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAGING_01_
REOR_REORG0. DBF
creating file data fno = 14 name = D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAGING_02
Comprehensive REORG0. DBF
channel ORA_DISK_1: from datafile backupset restoration
channel ORA_DISK_1: specifying datafile (s) to restore from backup set
restoring datafile 00001 to D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01. DBF
restoring datafile 00002 to D:\ORACLE\BISE1\ORADATA\BISE1DB\UNDOTBS01. DBF
restoring datafile 00003 to D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSAUX01. DBF
restoring datafile 00004 to D:\ORACLE\BISE1\ORADATA\BISE1DB\USERS01. DBF
restoring datafile 00005 to D:\ORACLE\BISE1\ORADATA\BISE1DB\EXAMPLE01. DBF
restoring datafile 00007 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_DIMENSIONS_0
1 DBF
restoring datafile 00008 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_FACTS_01_REO
RG0_REORG0. DBF
restoring datafile 00009 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_INDEXES_01.D
BF
restoring datafile 00011 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_DIMENSIONS_0
1 DBF
restoring datafile 00012 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_FACTS_01_REO
RG0_REORG0. DBF
restoring datafile 00013 at D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_INDEXES_01.D
BF
restoring datafile 00015 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_STAGING_01_R
EORG0. DBF
channel ORA_DISK_1: backup D:\TESTBI_BACKUP\32LEG5CR_1_1 piece reading
channel ORA_DISK_1: restored the backup part 1
piece handle = D:\TESTBI_BACKUP\32LEG5CR_1_1 tag = BACKUP_BISE1DB_000_052410030823
channel ORA_DISK_1: restore complete, duration: 00:41:37
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command at 25/05/2010 16:32:18
ORA-12703: this character set conversion is not supported
Try following

SET NLS_LANG = AMERICAN_AMERICA. AR8MSWIN1256
NLS_DATE_FORMAT value = HH24:MI:SS: DD-MM-YYYY

RMAN > RUN
2 > {}
3 > SET until TIME ' to_date (May 24, 2010 18:00 ',' DD-MM-YYYY HH24:MI:SS') ";
4 > RESTORE DATABASE;
5 > RECOVER DATABASE;
{6 >}

for example:

C:\Documents and Settings\Administrateur > SET NLS_LANG = AMERICAN_AMERICA. AR8MSWIN12
56

C:\Documents and Settings\Administrateur > value NLS_DATE_FORMAT = HH24:MI:S DD-MM-YYYY
S

C:\Documents and Settings\Administrateur > rman target /.

Recovery Manager: Release 10.2.0.1.0 - Production on Tue may 25 20:30:51 2010

Copyright (c) 1982, 2005, Oracle. All rights reserved.

connected to target database: T (DBID = 608834747)

RMAN > run
2 > {}
3 > SET until TIME ' to_date (May 25, 2010 20:29 ',' DD-MM-YYYY HH24:MI:SS') ";
4 > RESTORE DATABASE;
5 > RECOVER DATABASE;
{6 >}

executing command: SET until clause
using the control file of the target instead of recovery catalog database

From restoration to 2010-05-25 20:32:33
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid = 159 devtype = DISK

channel ORA_DISK_1: from datafile backupset restoration
channel ORA_DISK_1: specifying datafile (s) to restore from backup set
restoring datafile 00001 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSTEM01. DBF
restoring datafile 00002 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\UNDOTBS01. DBF
restoring datafile 00003 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSAUX01. DBF
restoring datafile 00004 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\USERS01. DBF
channel ORA_DISK_1: backup D:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
OVERY_AREA\T\BACKUPSET\2010_05_25\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. BKP
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command at 2010-05-25 20:32:37
ORA-19870: error reading backup total D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
EA\T\BACKUPSET\2010_05_25\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. BKP
ORA-19573: failed to get exclusive enqueue for datafile 1

RMAN > shutdown immediate;

database closed
dismounted database
Instance Oracle to close

RMAN > startup mount;

connected to the database target (not started)
Oracle instance started
mounted database

Total System Global Area 125829120 bytes

Bytes of size 1247660 fixed
67110484 variable size bytes
54525952 of database buffers bytes
Redo buffers 2945024 bytes

RMAN > run
2 > {}
3 > SET until TIME ' to_date (May 25, 2010 20:29 ',' DD-MM-YYYY HH24:MI:SS') ";
4 > RESTORE DATABASE;
5 > RECOVER DATABASE;
{6 >}

executing command: SET until clause

From restoration to 25/05/2010 20:34:25
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid = 156 devtype = DISK

channel ORA_DISK_1: from datafile backupset restoration
channel ORA_DISK_1: specifying datafile (s) to restore from backup set
restoring datafile 00001 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSTEM01. DBF
restoring datafile 00002 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\UNDOTBS01. DBF
restoring datafile 00003 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSAUX01. DBF
restoring datafile 00004 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\USERS01. DBF
channel ORA_DISK_1: backup D:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
OVERY_AREA\T\BACKUPSET\2010_05_25\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. BKP
channel ORA_DISK_1: restored the backup part 1
room handle=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\T\BACKUPSET\2010_05_25
\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. Tag BKP = TAG20100525T202245
channel ORA_DISK_1: restore complete, duration: 00:00:35
Restoration finished in 2010-05-25 20:35:03

Starting recover at 2010-05-25 20:35:03
using channel ORA_DISK_1

starting media recovery

archive log thread 1 sequence 3 is already on the disk that the file D:\ORACLE\PRODUCT\10.
2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2010_05_25\O1_MF_1_3_5ZQTYVPY_. ARC
archive log thread 1 sequence 4 is already on the disk that the file D:\ORACLE\PRODUCT\10.
2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2010_05_25\O1_MF_1_4_5ZQTZC1Y_. ARC
archive log thread 1 sequence 5 is already on the disk that the file D:\ORACLE\PRODUCT\10.
2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2010_05_25\O1_MF_1_5_5ZQV6SRW_. ARC
archive log filename=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2
010_05_25\O1_MF_1_3_5ZQTYVPY_. Wire ARC = 1 = 3 sequence
archive log filename=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2
010_05_25\O1_MF_1_4_5ZQTZC1Y_. Wire ARC = 1 sequence = 4
media recovery complete, duration: 00:00:02
Finished recover at 2010-05-25 20:35:07

RMAN > alter database open resetlogs;

open database

RMAN >

Published by: admin on May 25, 2010 08:37

Definition of static Variables dynamically
I have an application that instantiates a class several times. Many variables for the class is loaded from a XML when running and may vary each time the program runs, but will not change once the program is running.

I want to initialize static variables in this category once and then rely on their values through the program. I could do this in the constructor function, but then I think that I do whenever I have to instantiate the class and so will suffer an excessive workload.

1. is there a way to define static variables once and then let him go without a check in the manufacturer each time to see if they are a null value (and therefore put them)?

2. do I create an instance of the class to set?

Any help is appreciated.

Bob
> 1. Is there a way to define static variables once and then let it go
> without
> a check in the manufacturer each time to see if they are a null value (and
> so
(> Set them)?

Just use dynamic variables. Keep all the in a class as follows:

class myVariables
{
Objects: variables vars private;

public void readVariable(name:String)
{
return variables [name];
}

public void myVariables (init:XML = null)
{
variables = new Object();

default init
variables.xxx = 5;
variables. ABC = "test";

If (init)
{
set variables for the values passed in the XML strcture;
}
}
}

MV = new myVariables();
trace (MV.readVariable ("ABC")); Returns "test".

You can keep the instance of this class as a global object is accessible for
other classes without initializing it.

Static variables in the Page of the OFA
Hello

We have a requirement to show the popup message when changes are made in the page of the OFA. We use the static variable in the OPS page to store the initial values of some fields and whenever the popup needs to be shown, it compares the value of the static variable for the current value. If they are different then we are the message. It works perfectly fine when the page is accessed by the single user. But when several users access a single screen, it shows the message to a user even if the values are not changed by this user, but the other user has changed. My question is-

1. do we need to use variables of session always for users multiple scenarios?
2. How does the static variable in java? It is not unique to the session? If so, above the question shouldn't come.
3. how to solve the problem above?

Pointers on this would be a great help.

Thank you
Shree
I did not understand the part same page can be accessed by different users. In any OA framework Page, the same page is accessible by several users. If you think abt the same data updated at the same time, then search functionality of Version number of the object in the context of OSTEOARTHRITIS.

All instances of the VO are unique for each session. So no need to worry about this side here.

Concerning
Sumit

Quicken essentials not supported

I need a new program to replace Quicken Essentials. I upgraded to Sierra, and it is not supported. My needs are simple. I just need to follow my checks, deposits, withdrawals, bills paid etc... I would like to be able to import my backup Quicken Essentials. Can anyone suggest a program?

Thank you.

Quicken 2016 can import the data.

(144948)

Dreamweaver CS 5 do not support static variables PHP 5.6?

Similar Questions

Maybe you are looking for