Dreamweaver CSS6: menu and spacer images not appearing is not in the background

Similar Questions

• When I log in the background screen of Windows XP appears, but the icons, start menu and taskbar do not appear. What should I do?

  To start my computer upward as usual and takes me to open a session. I connect and my background appears, however my desktop icons, start menu and taskbar DO NOT appear. I can still access the Task Manager and command prompt, but when I try to use a command, absolutely nothing is happening, leaving this method of system recovery is not possible. What should I do?

  bleedorange1998,
  Thanks for posting with us.  I suggest try to start safe mode and see if it works correctly.  If Yes, then you can start using the "last known good configuration."   If in Safe Mode, you have the same problem, you should run chkdsk /r and sfc/scannow.  Here are the instructions for these suggestions.  Post back with the results.

  This article explains how to start the Windows Advanced Options menu: http://support.microsoft.com/kb/315222

  CHKDSK: http://support.microsoft.com/kb/315265

  SFC: http://support.microsoft.com/kb/310747

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The start menu and taskbar does not appear.

  original title: the start menu and taskbar does not appear.  IM on windows 7.  Any help please?

  The start menu and taskbar does not appear.  IM on windows 7.  Any help please?

  You can try to leave Explorer yourself.  Here's how:

  1. Press Ctrl-Shift-escape, which should open the Task Manager.
  2. On the file menu, choose new task.  Type explorer.exe and press ENTER.  The taskbar and the desktop should appear.

  However, this is not a permanent solution.  My best advice to you would be to use the system restore to go back to one hour before the beginning of the question.  This restoration process takes about 2 minutes and will not lose one of your folders: it restores only the settings from the system to a point in time that you choose (you can 'come back' as little as a few hours or several weeks).

  To do a test, follow the steps below.  I guess that you are unable to reach the taskbar for the following steps:

  1. Press Ctrl-Shift-escape, which should open the Task Manager.
  2. On the file menu, choose new task.  Type rstrui.exe (this name is for 'restore user interface').  When you click OK, the system restore should start.
  3. Through the system restore program, you will choose a time to come back. When you have completed the program, your computer will restart with the settings at this time.

  Please let me know if it helps.

• If I Zoom in an image appears a large black squares and I do not see the image, I use a CC 2015 Photoshop in a Mac, can anyone help me please?

  If I Zoom in an image appears a large black squares and I do not see the image, I use a CC 2015 Photoshop in a Mac, can anyone help me please?

  There are three things to try. If this image has been opened through Adobe Camera Raw 9.0, unchecking the GPU in ACR preferences. 9.1 is up-to-date and should have corrected it.

  

  Second: Photoshop Preferences > Performance > GPU settings advanced, tamp him drawing to this Basic Mode.

  

  If it does not, uncheck the box "Use Graphics Processor" in Photoshop preferences until there is a fix.

  I don't think that OSX allowed for graphics drivers updated by author GPU like Windows does.

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• How can I change the layout or the size of the photos in my Gallery?  I have started a project and downloaded some pictures of her.  Now when I click on projects opens the gallery page and I do not see the pictures because the vertical photographs are dis

  I have started a project and downloaded some pictures of her.  Now when I click on projects opens the gallery page and I do not see the images because the vertical photographs are displayed on the monitor.  I tried all layouts different portfolio and it does not change the way my photos appear in the gallery.  They are too big!  Here is my example.  Astriya photography

  Thanks for the help!

  Place the cursor over an image and a pencil appears on the side. Click on it and you will get the options including one to change the width and alignment. This seems to be the only option currently.

• "WARNING: Images not within the site"

  "WARNING: Images not within the site"

  (Dreamweaver 8 - Mac)

  I am trying to download my first site, but I get the warning above when I try.  My images ARE in the 'root' folder in a file named "images".  AND in my finder, they are all fine.  And when I load in a browser to test the site everything works fine.

  During my construction, I imported images in my site from another file outside my "root folder" and Dreamweaver automatically copied them more in my "pictures" folder in my "root folder".

  Because Dreamweaver copied the images automatically, I deleted the original with the image file.

  Can anyone offer an explanation and a solution?

  Check your site definition. You can set a folder of images by default wrong with an absolute path.

  Mylenium

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• Firefox 34.0.5 cannot print correctly. I checked all the pages on firefox problems and still can not solve the problem.

  I use 34.0.5 with Windows 7 and that you cannot print correctly. In print preview, it appears in a label size. I double checked all my settings in firefox and my preferences from the printer, I checked all the pages on firefox problems and still can not solve the problem.

  I was able to finally solve the problem, but I had to do a complete reset of firefox. Thank you for your time.

• Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

  Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If this does not help, I would like to try a restore:

  https://support.Apple.com/en-us/HT201252

• Windows xp monitor does not display the background image

  My windows xp screen does not show the background image. Started when I changed the photos there twice. Now, the background image is only 1/4 of the image on the left 1/4 of the screen. The rest is white for 3/4 on the right side.

  Other images, all jpg files, are the same.

  Hi edwardo418,

  Check that your post office is set to stretch. Perform the following steps.

  1. Right-click on an empty space on the desktop.
  2. Select Properties.
  3. Select the Desktop tab
  4. Change the setting to Stretch under Position
  5. Click on apply
  6. Click OK

  Let us know if that helps.

• I had a fast PC program that keeps coming up as an error and I can not find the program on my PC?

  There is a Speedy PC Pro porgram on my computer keeps coming back as an error and I can not find the program or software

  any where on my computer to uninstall or remove. I don't know where it comes from. Please notify.

  If the "program not found" error message is associated with the Windows startup, another solution is to use the System Configuration tool and remove applications from the startup list.

  Here are the steps on how to do this:

  1. Move the cursor to the Start menu and then click on "Run".
  2. In the Open box, type msconfig
  3. Heat the Enter key
  4. Click the Startup tab
  5. Remove/disable all uninstalled applications in the startup list
  6. Move the cursor to the Start menu and then click on 'stop'. After that click on 'restart'.

• How to keep images splash screen specific for the portrait and landscape mode. for example, I have one 360 x 640 image for portarit and another image of 640 x 360 for the landscape

  How to keep specific splash screen for portarit and landscape mode images. for example, I have one 360 x 640 image for portarit and another image of 640 x 360 for the landscape.

  The two are different

  When the user holds the phone in portarit specific Portrait image should appear

  Similarly when the user holds specific landscape landscape image must be indicated without changing the quality of the image.

  IAM answer showing 1 portarit boot image using the

  Hi srk2012,
  You cannot apply 2 different splash screen inames for OS5, 6, 7.

  Check this link https://developer.blackberry.com/html5/documentation/rim_splash_element.html

  Thank you best regards &,.
  Laurent Subudhi

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I have age of empires 3 and I can not start the program.

  Hello

  I have age of empires 3 and I can not start the program.
  The program is installed, but once the autorun.exe appears (with the icons of the game, uninstall, website, out) I click on play and the game does not just start. My computing needs are fairly good for the game because I used to play the game on the same computer later.

  Thanks for your help

  David

  Bink is what plays the scenes cut in many games.

  Installation folder of AOE 3 the binkw32.dll should be in games.
  If it is then it is may be damaged and reinstall the game normally would set the
  problem.

  AutoPatcher.exe - I do not know because I never use auto-patchers with games.
  I have always to download the patch and install manually.
  However, my game has the RockallDLL.dll file.

  I don't really know a good site to lead you to these files.
  You can find a binkw32.dll in another game. Try doing a search of
  Program Files (x 86) (or another location if you install games to the default locations). If you have the file in another game you can copy into your AOE3
  folder of the master installation.

  There was a lot of discussion on these forums about AOE3 so a
  search of these forums may find another suggestion.
  You can also try the specific AOE3 forums-

  Age of Empires Forums - Forums

  Age of Empires III heaven Forum

  .