Dreamweaver is not FTP very well?

Similar Questions

• Portege M600 - ConfigFree does not work very well

  Pls help friends...

  I've used it before very well with ConfigFee.
  Once I changed the profile, the LAN and wireless IP change correctly.
  I m on WinXP SP2. I just reinstalled Windows and ConfigFree does not work very well.

  I have LAN IP and wireless in this profile.
  I have the problem when I change the profile, I received the error message for the wireless IP does not change (the question did not pass.) TCP/IP configuration

  The following may be responsible for the failure. Wireless LAN Utility is active (Please close the utility). Network Properties window is open (Please close the window). The Internet options window is open (Please close the options window). I use PROSet to control the wireless.

  I tried the solution proposed and even reboot my laptop, but there s no chance...
  Can help you pls?

  First of all, you can use a single tool to configure WLan.
  You cannot use Windows WLan configuration option, the Intel ProSet utility and ConfigFree at the same time.

  Second, I put t understand why you use ConfigFree to Wlan configuration.
  In case you, I advise to use the Intel ProSet tool or clean Windows WLan settings.

  In addition, I put t understand why you change the LAN and Wlan profiles?
  In all profiles of your Wlan IP address must be set to automatic as the WLan router automatically assigns the IP address.

  But like I said above; only one WLan configuration tool can be used!

• Satellite L500-126-CD/DVD drive does not open very well unrolled

  Hello

  I just got my second Satellite L500-126.
  I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.

  Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
  Is this normal?

  Also, when I close the dvd player, I hear a little noise "ping!"
  Like a spring, or something. Is that also normal?

  Thanks in advance.

  Hello

  I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
  This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
  Still, you will hear a short click Open and close the drive.

  So I guess it's ok.

• My OS windows 7 does not work very well, can not install or uninstall programs

  My OS windows 7 does not work very well. Cannot install or uninstall programs. A week back ilivid software got installed, guess this particular software has caused the problem. Cannot run the task with the option in the control panel. I don't want to format my system since there are a lot of personal data. Instead of looking for any option of repair for BONE. Would appreciate if you can let me know the best way for recovery.

  My OS windows 7 does not work very well. Cannot install or uninstall programs. A week back ilivid software got installed, guess this particular software has caused the problem. Cannot run the task with the option in the control panel. I don't want to format my system since there are a lot of personal data. Instead of looking for any option of repair for BONE. Would appreciate if you can let me know the best way for recovery.

  Hello

  I would recommend to restore the system to a date before the problematic software installation / before the start of the question - Windows system restore 7

  Kind regards

  Patrick

• read png: transparency does not work very well

  IM programatically loading PNG images and put them in a picture box. However, I see big differences when I programmatically load a picture or just drag it to the front of windwos Explorer; See attached picture.

  I can change the loaded PNG transparency, but making very high makes the alias bad image; doesn't look like not smooth. When its low there white edges.

  Are their other options?

  

  The left is loaded programmatically, the right is moved from windows Explorer; identical image.

  I have attached the original png too

  Felix

  You can try the code I posted here:

  http://forums.NI.com/T5/LabVIEW/how-to-get-Alpha-images-on-picture-box/m-p/1138513#M501588

  

  The boxes are designed to test the mixture.

• Dell Inspiron Fingertapps/Touchzone does not work very well under Vista

  Fingertapps /Touchzone on my new Insipiron Dell ceased to function fully. I tried to download the latest version of Dell, but this has not fixed this problem.

  The Fingertapps in on my new Insipiron Dell Touchzone ceased to function fully.  I tried to download the latest version of Dell, but this has not fixed this problem.

  You must contact the Support Technology Guide for assistance with these products at:http://support.dell.com/support/index.aspx?c=us&l=en&s=dhs.  As this is a new Dell computer, it will still be under warranty and they will be more than happy to help you.  We know nothing about the function of these programs or how to fix therm (or at least in my case, even what they're doing and I have a Dell).

  I'm sure that they that they can help you get this installed and working properly.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry software link does not work very well on Mac OS

  Hey,.

  I must say, there are two issues I have with BB and Mac OS X lion of mountain connection.

  (1) if I start the software it says there's an update available, but when I click it nothing happens (not download)

  (2) I can't connect to my ID BB BB link...

  then I tried it on a windows pc and everything worked.

  Is it just me or is this a general problem?

  THX!

  Hey Z10_owner,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  I get an error when you try to sign in with your ID BlackBerry or download the update?  Have you tried to reinstall BlackBerry link?  Also is there a security software installed on Mac OS?  Also what version of OS are you running?

  I look forward to your reply.

  See you soon.

• My campaign does not work very well...?

  I made a simple campaign, all records are moved to the stage of waiting and all contacts have not opened the e-mail. They moved directly to the shared list.

  Suggest me where I am missing...!

  Kind regards

  Alok

  Hey Alok,.

  If you want to add criteria to open E-mail and then create a filter and use this filter in your Inbox open decision.

  Basically this should be the 4 step program

  1. Add contacts for the campaign at the beginning stage

  2 send email

  3. check email opened or not

  4 Yes branch add to open the Group and for any use of the branch to remove the program

  Why do you use expect step so that you can use try again or you must specify what type of actions you want in your campaign

  edynamic expert Eloqua

• My acrobat does not work very well. So I deleatet it and you want to download again. But I can't find the download?

  I have Acrobat Pro als Jahresabo. Works Leider nicht oft, sodass ich're deinstallieren would. Wo finde ich den download, damit ich kann Rubis responsible for you?

  Hello

  because of your German/English words, I'm not sure and so if you need / want this link?

  http://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

  Hans-Günter

• iPhone 5 only connects very well with 5 Ghz Wifi

  Hi all

  After trying Beta iOS10 I 'come back' iOS9 and I discovered that my iPhone 5 will not connect very well to 2 .4GHz wireless networks. The problem is that the iPhone or do access or has a very poor connectivity, so that I can use this wifi perfectly with my iPad or Macbook.

  However this iPhone connects perfectly to Wifi 5 GHz networks and works as it should.

  I tried to reset, restore the default values, reinstall iOS... any suggestions?

  Hello iovin80,

  Thank you for using communities Support from Apple. I know having a problem connecting to the Wi - Fi on your iPhone, it's not what you expect. If I understand correctly, you cannot connect to the network 2.4 GHz Wi - Fi, but the 5 GHz channel works very well. I suggest to test it on another Wi - Fi network to see if the problem is resolved. You should also check the recommended settings to avoid any interference in the present statutes:

  Potential sources of Wi - Fi and Bluetooth interference
  Recommended settings for the WiFi routers and access points

  See you soon!

• After years of work very well and no recent change, my thunderbird now refuses to retrieve emails from one of my 3 email addresses. What should I do?

  Last week he had slowed down considerably in the recovery of messages to this e-mail address, but now it doesn't work at all. The other three addresses properly.

  The email address that does not work very well on my phone and on the webmail, but not on thunderbird.

  You can do this:

  • Create new folders if necessary.
  • Move all emails that are in the Inbox in the appropriate folders.
  • Delete emails you don't want to.
  • When the Inbox is empty, do a right-click on the Inbox, and then select "compact".
  • then try Get Mail.

• When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well.

  Original title: Internet wireless connection

  I use a PC & a cable modem wireless to connect to the Internet.  When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified.  I wait a few minutes until what he says at last he is identified & seems to work very well.  The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web.  This could be a looming problem with the modem, or is it something else?  Should I consider it as my modem is still under warranty?  ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.

  Thank you

  [Transferred from Internet Explorer]

  Roll up your sleeves & cross your fingers...

  ACTIONS:

  [You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]

  1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.

  4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9, too.

  4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.

  4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings

  Note => for best results, check the option Remove personal settings .

  7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].

  8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]

  9 restart once again & test.

  10. in response to this post with a status report.

  ==================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.

  [3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• New type of font "Century Gothic" and works well with the 'live view', but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank y

  I downloaded my new "Century Gothic" font type and works well with live view, but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank you!

  I use and Filezilla to connect to our FTP site.

  I see on line 42 of style.css

  do-family: 'Courier New', Courier, monospace;

  I see on line 180

  do-family: "Helvetica Neue", Helvetica, Arial, sans-serif;

  and I see FontAwesome used in several places.

  I can only conclude that Courier New is the applied font.

  If you have a different version of style.css on your local system?

• Firefox does not display my photo site properly, or play music from it on my new computer. I have 2 other PC and it works very well on those.

  Just set up a new PC and downloaded Firefox. It will not display correctly my Zenfolio Photo site or it will play music that accompanies the slideshow on the home page. I have 2 other PC and it works very well on them. All are Windows 7 Home Premium.

  Yes. He uses Flash to show the images and music. Go to tools-> Add-ons and check the Plugins. Make sure that Shockwave Flash 16.0.0.305 is not set to never turn on. I keep me always activate.

  If you do not see flash, can get Adobe Flash here: https://www.adobe.com/products/flashplayer/distribution3.html and the EEG for the Plugin-based browsers.

  If flash is installed, then it sounds like something is blocking.

• DVD autorun.exe opens main html.menu very well, but when click on hyperlink in the menu it opens the new tab, but does not play a video, but the video html works directely

  Autorun.exe DVD opens with main menu.html. then when I click 1. HTML which is ment to start (from the main menu.html) only to open a white page only and plays not the file using src = flvplayer.swf player flash video. (it works on all other browsers) fine. Installed the flash plugin but still does not not in Fire fox. But when I navigate to the root of the cd and click 1. HTML it opens and plays very well, but do does not form the main menu.html. any help would be grat

  Thank you

  In your main.html:

  • What is the URL in the address bar?
  • What is the URL of the link?