My campaign does not work very well...?

Similar Questions

• Portege M600 - ConfigFree does not work very well

  Pls help friends...

  I've used it before very well with ConfigFee.
  Once I changed the profile, the LAN and wireless IP change correctly.
  I m on WinXP SP2. I just reinstalled Windows and ConfigFree does not work very well.

  I have LAN IP and wireless in this profile.
  I have the problem when I change the profile, I received the error message for the wireless IP does not change (the question did not pass.) TCP/IP configuration

  The following may be responsible for the failure. Wireless LAN Utility is active (Please close the utility). Network Properties window is open (Please close the window). The Internet options window is open (Please close the options window). I use PROSet to control the wireless.

  I tried the solution proposed and even reboot my laptop, but there s no chance...
  Can help you pls?

  First of all, you can use a single tool to configure WLan.
  You cannot use Windows WLan configuration option, the Intel ProSet utility and ConfigFree at the same time.

  Second, I put t understand why you use ConfigFree to Wlan configuration.
  In case you, I advise to use the Intel ProSet tool or clean Windows WLan settings.

  In addition, I put t understand why you change the LAN and Wlan profiles?
  In all profiles of your Wlan IP address must be set to automatic as the WLan router automatically assigns the IP address.

  But like I said above; only one WLan configuration tool can be used!

• My OS windows 7 does not work very well, can not install or uninstall programs

  My OS windows 7 does not work very well. Cannot install or uninstall programs. A week back ilivid software got installed, guess this particular software has caused the problem. Cannot run the task with the option in the control panel. I don't want to format my system since there are a lot of personal data. Instead of looking for any option of repair for BONE. Would appreciate if you can let me know the best way for recovery.

  My OS windows 7 does not work very well. Cannot install or uninstall programs. A week back ilivid software got installed, guess this particular software has caused the problem. Cannot run the task with the option in the control panel. I don't want to format my system since there are a lot of personal data. Instead of looking for any option of repair for BONE. Would appreciate if you can let me know the best way for recovery.

  Hello

  I would recommend to restore the system to a date before the problematic software installation / before the start of the question - Windows system restore 7

  Kind regards

  Patrick

• Dell Inspiron Fingertapps/Touchzone does not work very well under Vista

  Fingertapps /Touchzone on my new Insipiron Dell ceased to function fully. I tried to download the latest version of Dell, but this has not fixed this problem.

  The Fingertapps in on my new Insipiron Dell Touchzone ceased to function fully.  I tried to download the latest version of Dell, but this has not fixed this problem.

  You must contact the Support Technology Guide for assistance with these products at:http://support.dell.com/support/index.aspx?c=us&l=en&s=dhs.  As this is a new Dell computer, it will still be under warranty and they will be more than happy to help you.  We know nothing about the function of these programs or how to fix therm (or at least in my case, even what they're doing and I have a Dell).

  I'm sure that they that they can help you get this installed and working properly.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• read png: transparency does not work very well

  IM programatically loading PNG images and put them in a picture box. However, I see big differences when I programmatically load a picture or just drag it to the front of windwos Explorer; See attached picture.

  I can change the loaded PNG transparency, but making very high makes the alias bad image; doesn't look like not smooth. When its low there white edges.

  Are their other options?

  

  The left is loaded programmatically, the right is moved from windows Explorer; identical image.

  I have attached the original png too

  Felix

  You can try the code I posted here:

  http://forums.NI.com/T5/LabVIEW/how-to-get-Alpha-images-on-picture-box/m-p/1138513#M501588

  

  The boxes are designed to test the mixture.

• BlackBerry software link does not work very well on Mac OS

  Hey,.

  I must say, there are two issues I have with BB and Mac OS X lion of mountain connection.

  (1) if I start the software it says there's an update available, but when I click it nothing happens (not download)

  (2) I can't connect to my ID BB BB link...

  then I tried it on a windows pc and everything worked.

  Is it just me or is this a general problem?

  THX!

  Hey Z10_owner,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  I get an error when you try to sign in with your ID BlackBerry or download the update?  Have you tried to reinstall BlackBerry link?  Also is there a security software installed on Mac OS?  Also what version of OS are you running?

  I look forward to your reply.

  See you soon.

• My acrobat does not work very well. So I deleatet it and you want to download again. But I can't find the download?

  I have Acrobat Pro als Jahresabo. Works Leider nicht oft, sodass ich're deinstallieren would. Wo finde ich den download, damit ich kann Rubis responsible for you?

  Hello

  because of your German/English words, I'm not sure and so if you need / want this link?

  http://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

  Hans-Günter

• Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

  I have a Satellite C50D-A0302, PSCGWF part number.
  I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

  How can I get the right drivers for the touchpad?

  How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

  Thank you!

  As you probably know Toshiba does not support Linux and does not offer Linux drivers.
  All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

• Satellite L500-126-CD/DVD drive does not open very well unrolled

  Hello

  I just got my second Satellite L500-126.
  I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.

  Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
  Is this normal?

  Also, when I close the dvd player, I hear a little noise "ping!"
  Like a spring, or something. Is that also normal?

  Thanks in advance.

  Hello

  I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
  This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
  Still, you will hear a short click Open and close the drive.

  So I guess it's ok.

• Compact Z5 camera away from the lock screen and the camera button does not work as well

  Don't know what that happen but the icon of the camera on the lock screen suddenly disappeared and camera quick launch button does not work as well. Can I still use the camera from apps however.

  Problem solved through launch quick adjustment of the device. However, didn't turn off in the first place. Hoping that this is just a small problem

• Satellite A300-201 - does not work so well

  Hallo,

  My new Toshiba A300-201 has a problem. Sometimes it works so well, especially when I listen to music with Windows media player. The symptom is the windows media player does not work ca. 2-3 seconds, and the machine makes a noise loud enough and weird. It is quite often, 15 minutes once.

  Did anyone know about this?

  Thank you!

  Hello!

  You have this problem only with Windows Media Player?
  If so, check if you have the latest version and try another player.

  In addition it is not easy to say what the problem is. You have installed the laptop with the recovery disk?
  Maybe you should check the RAM with Memtest86 and the disk with Drive Fitness Test.

  Good bye

• There is no audio coming from my my lap top my microphone does not work as well?

  my sound system does not work

  Hello

  1. What is the brand and model of the microphone?

  2. what exactly happens when you try to play the sound?

  3. what operating system is installed on the computer?

  I suggest you follow the steps from the link below.

  No sound in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is useful.

   

• Body is fixed regardless of what I do and just Funes dragging. Origin of the head does not work as well.

  Hey!

  In collaboration with Adobe host character Preview 3, made all the tutorials, they are great!

  Head of my character works fine, but the body (arms and torso) are fixed to the bg. I never fired them, they are just firmly stuck.  I've tried everything. removal of all the possible Islands, restart, re import, removal of all layers but a piece of the head and then adding a stick as the body figure... no matter what, the body remains fixed. If I put a player on hand is not distort the body but a piece of the arm... I am at a loss. Any help would be appreciated!

  Another strange aspect is that the head or the neck has no place of origin. I tried to put one in a bunch of times but it does nothing, but head still seem to work perfectly.

  This program so much love. Can't wait to see what he does next!

  -Lechuck11111

  

  In addition to the tip of DaveW, also add a '+' in front of the Mervin top-level group.

• Thunderbird does not work - very disappointed

  I got to play a sound when I receive e-mail in my regular Inbox. It does sometimes, but most of the time it isn't. I just need to check from time to time to see if there is any new mail it. I can't respond to mail important timely for this reason.

  Second, it ALSO randomly plays the new mail sound when mail is received in my trash. I use filters to direct messages from low priority to the trash. I don't want to know what mail goes, this is the folder I want to check from time to time and do not informed of mail is received it.

  These two issues are completely random.

  I think it is (or is supposed to) when messages arrive in your Inbox.

  Given that your filter is on the Inbox and moves the messages selected in the trash, these newly arrived messages have already triggered the new mail indicator.

  I don't like noisy computers and my speakers are almost always muted, so I do not use this module myself, but the add-on ToneQuilla offers the possibility to play specific sounds depend on filtering. This might be able to give you a silent moves to the basket and could improve the success rate of play wanted noises.

  What platform do you use i.e. Windows, OSX or Linux? Linux in particular seems reluctant to make noises on the mail either.

• Explorer 9 causes flash does not work as well as questions of secuity in Vista 64 bit OS

  When I install Internet Explorer 9 on my Vista 64 Bit operating system and access a secure Web site he States my browser is not able to display this page correctly.  Or if the flash is necessary it ask me to install flash.  When I reinstall flash that it says not supported for Vista 64-bit.  So, I converted to Internet Explorer 8 and my problem is solved.  Why does 9 version cause such a headache when it is supposed to be so much more rapid and improved?  Thank you

  Unfortunately, Adobe has not developed a 64-bit Internet Explorer 9 (64-bit) flash player for Windows Vista.  What you need to do is to use the 32-bit version of IE9 on Windows Vista.