drive stopped working

No matter what I do when I go to Facebook, the site is very well put when I play a game be Dore I had an encrypted pages now none are and I left my other computer running windows 8.1 and updated the flash and everything and all my pages are encrypted then why not in windows 10 also windows 10 when you play a game with 3 min of loading game 80% of the time stops responding and gray no error message please help

It was running great intill update 15 now it will run great for about 1 hour or intill I go to a new page then it will freeze and I can't stop I turned off acceleration of flash player, but that did not help

Tags: Firefox

Similar Questions

Accelorator Windows driver stopped working

Occasionally, I have a message that comes up saying Windows accelorator driver stopped working for Windows XP and has recovered. I have Windows 7 Home premium so why would this message keep appearing from time to time.

I think you mean the error: display driver Intel Graphics Accelerator drivers for Windows XP stopped responding and has recovered

This means that your graphics driver has stopped working properly.
You need to update this driver, I guess its GPU from Intel because of the error message for the latest version of the driver can be downloaded from the Intel page so European page driver Toshiba.

I get the following error on my windows XP pc _ "ialmrnt5 display driver stopped working properly" my police doing real big and I have to restart my PC

I get the error message on my Windows XP pc
"ialmrnt5 display driver stopped working properly" my police doing real big and I have to restart my PC

How can I solve this problem?

What do you do when this happens?

You can try to find an updated driver and then update your driver to determine if it solves your problem.

Take a look at this article by Intel: http://www.intel.com/support/graphics/sb/CS-009483.htm

nvlddmkn display driver stops working, how to fix?

display driver stops working when you play

Download and install the latest nVIDIA Driver:

http://www.nvidia.com/download/find.aspx?lang=en-us

"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

What can I do if my lap suddenly profit and loss and say display driver stops working?

Well, I have windows 7. Sometimes when I open my browser, my laptop suddenly stopped automatically... and soon end up... in fact it says "DISPLAY DRIVER STOPS WORKING AND SCRAP with SUCCESS".

There is a big problem on my lap? pls help me... thanks

Hi Shara,

1 did you changes to the computer before the show?
2. what browser you use to access the Internet?

3. you get this error message while trying to open the web browser?

This problem may occur for one or more of the following reasons:

a. you may need to install the latest updates for your display driver
(b) Visual effects, or too many programs running in the background may be slowing down your PC
c. the GPU takes more time than allowed to display graphics on your monitor.

Note: If you use an older video card, it may be a video driver that is fully compatible with your version of Windows.

Please refer to the article to resolve the problem:

"Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
http://support.Microsoft.com/kb/2665946?WA=wsignin1.0

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry in Windows 7, see http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

Let us know if you have other questions about Windows in the future. We will be happy to help you.

Satellite L300 - DVD Toshiba drive stopped working

I have the Satellite L300 and Vista Home Premium installed.

When I try to open the DVD player, it is said: "Toshiba DVD has stopped working. Try to find the solution for this program. »

It was working before. I watched 3 movies on it and then simply collapsed without known reason.

Do not want to reinstall if not necessary.

Hello

> Don't want to reinstall if not necessary.
I m not very well why the software doesn't work anymore, but I think that it s advisable to reinstall.
You must first remove the old software (reader Toshiba).
Then you need to download the most recent version of the page of the European driver Toshiba DVD player and needs to be reinstalled it.

Check it out!

Equium A100: CD/DVD drive stopped working code 22

Toshiba Satellite A100 on Vista operating.
CD/DVD drive has stopped working and shows it as being disabled. Tried to re - activate but the error code 22. Can anyone help?

Hello

The Microsoft page provides information about error code 22

* This device is disabled. (Code 22) *.
_Recommended resolution_
+ Activate the device using Device Manager. +
+ In Device Manager, click Action, and then select device. Starts the Enable Device Wizard. Follow the instructions. +

Looks like you have already tired it. Well, in your case I would recommend removal of the CD/DVD drive from the list of devices in Device Manager. Mark simply the unit a press to remove.

Then, restart the computer and check what is happening.

AT1 display driver stops working while watching the video

Video sometimes stops for maybe a second or two. I hear a noise in the speakers at the same time. Once a message is come in box of the Action Center. He read AT1 display driver has stopped working 13 last time occurring on 02/03/2011 at 13:26. Hwelett-Packard is interested in the collection of additional information. My computer is a Dell XPS8100 not a HP. Any help or advice would be appreciated...

Hello

Check with Dell Support, their drivers and documentation online and ask in the Dell Forums for known issues.

Dell support
http://support.Dell.com/

Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

Dell forums
http://en.community.Dell.com/forums/
===============================================================

The underside is a convenience store of fairly comprehensive overall performance that should help.
First update the video driver ATI checking Dell, then to ATI.

Verify support with the ATI drivers (manually), and their forums as their problems could be known.

Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspx

ATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx

References to Vista also apply to Windows 7.

What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).

----------------------------------------------------

Follow these steps:

Try these to erase corruption and missing/damaged file system repair or replacement.

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

==========================================

After the foregoing:

How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135

Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).

How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

===========================================

Think about it an absolute must - manually update your drivers.

Vista and Windows 7 updated drivers love then here's how update the most important.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

===========================================

Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.

Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us

Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

I hope this helps.

ATI graphic driver stop working

Graphics driver ATI stop working properly...

Please help me to get this working again...

Thank you

Hello

Check with Support ATI, their drivers and documentation online and ask in their forum for known issues.

Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspx

ATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx

==================

References to Vista also apply to Windows 7.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

my computer cut enexpected, he said my display driver stopped working?

I have a Compaq Presario with windows vista, 32-bit. I was on the computer and it will stop unexpected because it says that my display drivers stopped working. my computer turned off and rebooted, now I have to do? It happen if I do nothing? I don't even know whaer my display drivers are found, please help.

Hello

This error can occur because of an outdated video driver in many programs running at the same time or same high CPU activity.

I suggest that you follow the steps in the following article and update us with the results.

"Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

http://support.Microsoft.com/kb/2665946

Registry warning

To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

322756 (http://support.microsoft.com/kb/322756/)

How to back up and restore the registry in Windows

Let us know if it helps!

Display driver stopped working, does not recover...

HP Pavilion dv7-6015tx

Windows 7 32 bit

ATI Radeon HD 6770 m

Hello

I thought I had solved this problem before, but it persists today.

A while back my pc would freeze and then recover, with pop - up saying dialogue

"display driver has stopped working and recovered."

Now, it does not recover, it remains just frozen.

This does not happen when I come back to the graphics card Mobile Intel.

It freezes when I use AMD ATI Radeon.

My PC freezes when I lead average graph low load.

(I watch YouTube videos via the media player and internet browsing)

This means that I'm not hardcore gaming, however when I'm hardcore gaming my pc does NOT freeze.

I have the latest software/driver graphic HP provides me with.

I can't install ATI, because everything I download from there, says it's not compatible with my device.

I also think that sometimes my pc is overheating.

I have HP CoolSense set for maximum cooling, however I think that this is not enough. (blue screen of death)

I tried SpeedFan software of third party temperature sensor that automatically adjusts the fan speed.

However, I don't think that the software is compatible with my motherboard because it can read my fan RPM speed.

I think it's the GPU causing overheating because the CPU is 50 degrees celcius at an acceptable (?).

This is a new laptop, so there is no collection of dust or debris in the exhaust gas.

I would like to update my graphics driver, there were no update driver since the: 2011-05-06

Also, I would like a method to increase the speed of the fan, preferably both GPU and CPU

to lower the temperature and components

Even as I write this, now I got force restart the computer because it froze. (driver has stopped working)

I realize that the graphics driver may not be the only problem

or it may be another problem, disguised as a problem of the graphics driver.

I am willing and pledged to use all means, (with the exception of a full recovery of my pc)

to fix my current misadventures with my laptop.

Kind regards

John

You must first update the latest version of the BIOS of your laptop.

http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-96635-1&CC=US&DLC=en&LC=en&os=4063&Product=5085756&sw_lang=

Once you update to the latest version of the BIOS download and install the following softpaq and this should solve the problem:

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-95106-1

This should solve the problem.

My CD/DVD drive stopped working... it is not recognized on my computer... I can't open the compartment either by ejection or manually

I have a laptop HP... I rarely use the DVD player... someone suggested the BIOS to default and disable the VRAM... Who has sense and how I would do? I tried Microsoft Fixit, but it does not work... I uninstalled the PCI controller. er in the management of devices and Rebooted, without success. It's as if my drive just disappeared.

Thanks for any help in advance

Hello

To manually open the drive:

For the readers of the status bar:

Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
a paper clip that will release him and the reader to open.

Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

Open a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip

=================================

For the readers of the slot:

Check with the manufacturer of system on how do to eject the disc.

Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

Be careful as you may damage the player using the method below:

You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

The method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrk

How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

Also have heard double tape on a credit card or play can work.

=========================================================

For the reader does not:

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

I hope this helps.

Rob Brown - MS MVP: Bike - Mark Twain said it right.

My cd dvd drive stopped working

Thursday, my cd dvd drive was working fine. Today, I tried playing a cd and my player does not recognize the discs I insert. I can't reinstall my driver because the drive does not work. When I run the diagnostic it says everything is fine. Where can I find the driver online to re - install?

Hello

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

display driver stopped working and then recovers

What I can do to solve this problem, it recovers after a 4 or 5 seconds!

Hello

Here is the explanation for the TDR component. This was introduced in Windows Vista.

What is a TDR? Windows Vista has a new feature called detection time and recovery (TDR). TDR tries to detect problematic situations and retrieve dynamically to a functional desktop. In operating systems earlier these situations would have led to a freezing of the system and forced customers to restart their PC.

More information about this feature in Vista can be found here: http://msdn.microsoft.com/en-us/windows/hardware/gg487368.aspx.

Therefore, when you see the error message TDR "Display driver stopped responding and has recovered", you know that the display driver is reset without requiring a reboot.

Concerning

RF Mux PXI-2546 driver stops working when DAQ SMU-6259 is used.

Hi, I am experiencing a very strange thing. I have a system with two 1065 equipped chassis with about 15 different instruments.

It was working fine and has done for several years. Today the SMU-6363 DAQ crashed, I tried to replace it with a spare DAQ SMU-6259. I started with switching just the daq spare in but then the computer crashed every time during the installation of the pilot SMU-6259. So I thought that I need a driver update and installed DAQmx 15.1 (previous version was 14.5). It has not made any change. Computer always crashes constantly. Finally I found that if I remove the PXI - 2546 Rfmux in the SMU-6259 DAQ system will install and work properly. But now Rfmux PXI-2546 will not work when acquiring data SMU-6259 are installed on the system. I can get the Rfmux to work if I take the DAQ and vice versa.

Why is it like this and what can I do to solve?

I do not understand why a PXI-2546 Rfmux and an SMU-6259 DAQ interfere with one another.

/ Erik

Hi Anton, thanks for your answer!

Yes, it's very strange. I narrowed down it to these two devices. I got the blue screen during the installation of the Windows driver. So I tried first update the driver OR DAQmx. Who did not have any change.

Then I tried to roll back the NOR-DAQmx driver to a previous version. Crashes stopped then, but I could not both devices to work simultaneously. In the windows Device Manager, he showed a problem for the NI DAQ PXI-2546 peripheral device. I don't know why a mux is considered DAQ hardware either. The description of the problem says "some free resources". If I could get the Rf mux to work if I unplugged the daq and vice versa.

For the last two days, I was reinstall the system from scratch. I'm not done yet because it takes so much time to do this, but it seems to be ok now. But what a pain. I started with just the driver Rf Mux (Switch).

To do this I had to download almost 3 GB! For a 2 x 4 x 1 Mux driver. Then, the driver for the installed switch some NOR-DAQmx which I had to then update and download even more.

I think that NEITHER makes it very complicated with the pilot stuff. Instead of having these huge drivers packages which supposed to cover everything, it would be better with the smaller specific device drivers that could be easily found on the web under each device.

In any case I hope it should work ok now. I wonder what will happen when I get home my repaired SMU-6363. Should I plug it in or simply do not bother because I could face the same problem again?

/ Erik

USB external hard drive stopped working

I use Vista Home Basic Edition on a Dell Inspiron 1525. I use a WD external hard drive for storage (almost a year) and it has been fine until today. All of a sudden he disappeared. At microsoft I used the fix tool and it said: relocation that the driver can solve - I say yes - device driver comes up saying installed successfully - but the disc puts to work continuously until I have unplug the USB or turn off. Then everything went again. I tried a dozen times, but it's always the same. The only new thing that was installed today was a color laser printer & I don't see why that would stop the hd. Any help or thoughts would be greatly appreciated as I need my data!

Hello KBS406,

Have you tried using a different USB Port? It maybe your H.D. must be assigned a letter given that your printer may have replaced it, itself when you install. How to change a drive letter: to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:
1. Sign in as an administrator or as a member of the Administrators group.
2. Click Start, click Control Panel, and then click performance and Maintenance.
3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
5. Click change.
6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
7. Click Yes when you are prompted to confirm the drive letter change.
The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

Hope this helps you. Let us know anyway. Make it a great day!

"In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

drive stopped working

Similar Questions

Maybe you are looking for