Equium A100: CD/DVD drive stopped working code 22

Similar Questions

• DVD player stopped working - Code 19

  My DVD / Blu - ray drive stopped working and I got this message when I looked inside:
  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  What should I do?

  Suppose you are on Windows 7 (or vista or XP) then there is automatic and manual setting set for code 19 here - [http://support.microsoft.com/kb/982116]

• My cd dvd drive stopped working

  Thursday, my cd dvd drive was working fine.  Today, I tried playing a cd and my player does not recognize the discs I insert.  I can't reinstall my driver because the drive does not work.  When I run the diagnostic it says everything is fine.  Where can I find the driver online to re - install?

  
  

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Equium A100-338 display has stopped working

  Hello

  I have exactly the same problem on my Equium A100-338 loaded with Vista.
  The display has stopped working (he went to a poorly lit black screen) after I had rebooted my machine even if the computer and the hard drive seems to work Ok with the lights on. I tried the usual elimination of power and the battery and restart it tricks, but after initial success it has stopped working after a few weeks.

  Once I had the computer operation that I only closed it down in the mode 'sleep', and he continued to work for a month until that he should be released after a windows update. I then plugged an external display and use of the Fn + F5 key got the external display running.
  Low and behold, the screen of the laptop started working again as if it had been "energised".

  I took what the laptop screen was OK and that he would not need replacement.
  The laptop worked OK until it needed to restart another when the unrest started again. The screens are gray on the monitor and the laptop now.

  These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  Now, I bought another laptop Toshiba Satellite to connect to the forums trying to find out if my original computer can be repaired
  These problems seem to be quite common on Toshiba computers.

  Any help members would be welcome.

  > These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  For the most part a graphics card driver must be reinstalled or updated to a newer version it can also be a problem of OS which means that the new facility could help
  But try to update the display driver

• Equium A100: CD/DVD drive wont read - D:\ error message is not accessible

  Hello.

  My cd/dvd rw drive will not read certain DVD/CD-ROM. I bought my equium (A100 I think) laptop, nine less than a year ago and have had this problem since I got it. The disk which do not work on the laptop work fine on another pc / dvd players, if the disc is not defective. At first I thought that it would be a driver issue because some of the disc worked fine, so I never got the laptop back to the store I bought.

  A message appears "D:\ is not accessible. The request could not be performed because of an i/o device error".

  I recently just got internet installed in my house and I went to the toshiba site to see if there are newer drivers that would solve this problem. I downloaded a bios update and an update of dvd ram and installed, but am still having the same problem.

  Can someone help me cause am totally stuck on what to do now.
  Thank you.

  Hello

  As you have probably not known the CD/DVD drive support not all backgrounds.
  In the user manual, you will find a list of supported CD and DVD

  But I assume that you are the reader cannot read certain media because of the impure registry as this other thread mentioned:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

  Please check that the user holmdps has solved this same problem.

• DVD driver stopped working

  The error I get in Device Manager is 'a driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32) »

  I was asked by (Microsoft) technical support that my DVD drive is not supported by win7 and I need to upgrade the hardware.  I did reluctantly.  I bought a new DVD burner IS on the material taken in charge and I get the same error.

  This system ran XP fine years.  Is there anyone who has experience able to help on this?  The first hour or so I spent on the phone was enough.  I don't have that kind of time to burn on futile efforts.  Win7 either takes in charge the DVD and CDROM drives or it does not.

  Try the following MS KB article:

  http://support.Microsoft.com/kb/314060

  Try following the steps for Windows Vista, which should also work for Windows 7.

• My CD/DVD drive stopped working... it is not recognized on my computer... I can't open the compartment either by ejection or manually

  I have a laptop HP... I rarely use the DVD player... someone suggested the BIOS to default and disable the VRAM... Who has sense and how I would do? I tried Microsoft Fixit, but it does not work... I uninstalled the PCI controller. er in the management of devices and Rebooted, without success. It's as if my drive just disappeared.

  Thanks for any help in advance

  Hello

  To manually open the drive:

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  =========================================================

  For the reader does not:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• my cd dvd drive stop working after I did a factory restore how to fix?

  I have a sony vaio vgn-nw305f, I had to do a factory restore and now my work dosent cd/DVD, how can I solve this problem?

  I have a sony vaio vgn-nw305f, I had to do a factory restore and now my work dosent cd/DVD, how can I solve this problem?

  ====================================
  The following article might be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)
  (scroll down and expand the section: "Let me fix it myself")

• Equium A100 - CD/DVD drive does not

  I tried to use the CD drive on the A-100 and it seems not to work - it spins the disc, and the yellow light - however, you can not explore to load the disc or its contents.

  I thought this might be an OS problem, so I tried with a boot disk - a bootable cd Knoppix I have used before, and it refuses to load this either (Yes, the boot order is modified to be the first CD)... it's just a black screen the blinks _ for a little while, he left no doubt and then it starts to boot from the HARD drive.

  It is a fairly portable new - a few months only and to my knowledge the CD from the drive has had very little use - 1-2 may be installed.

  Any ideas?

  Hello

  This very strange art.
  For me, your description looks like a hardware malfunction, but I just can't believe this could happen after using the player twice.

  You said you tried to use the Knoppix CD. What about the Toshiba Recovery CD?
  Is it possible to play the CD?

  In my operational experience, not all means are compatible! It is possible that the drive could not read or write other unsupported CD or DVD.

  So what to say in the user manual, you should find a compatible with CD/DVD index and supported.
  This CD and DVD should work for sure.

  CD/DVD manufacturers mentioned are unknown to most people, but these are ONLY the manufacturers and not sellers as IE TDK.
  Primarily a manufacturer of CD/DVD provides support for several vendors!

  So finally I recommend that you check the CD taken in charge and if she will not run contact the ASP for assistance. Maybe the drive needs to be replaced.

  Good luck

• My cd/dvd drive stop working.

  I have vista and I went to rip a cd and it says to install a cd player. In addition, the discs (CDs and DVDs) are not listed under drives in the computer. I have something to turn off somehow?

  see if this helps: http://support.microsoft.com/mats/cd_dvd_drive_problems

• Satellite L300 - DVD Toshiba drive stopped working

  I have the Satellite L300 and Vista Home Premium installed.

  When I try to open the DVD player, it is said: "Toshiba DVD has stopped working. Try to find the solution for this program. »

  It was working before. I watched 3 movies on it and then simply collapsed without known reason.

  Do not want to reinstall if not necessary.

  Hello

  > Don't want to reinstall if not necessary.
  I m not very well why the software doesn't work anymore, but I think that it s advisable to reinstall.
  You must first remove the old software (reader Toshiba).
  Then you need to download the most recent version of the page of the European driver Toshiba DVD player and needs to be reinstalled it.

  Check it out!

• DVD player stopped working

  My DVD on my Dell Inspiron 1545 drive stopped working about 9 months ago.  I uninstalled and reinstalled the program twice and nothing ever changes. I also did test problems, and nothing shows. What can I do about it? Help, please!

  If you are referring to the DVD player... it can have a
  material issue and needs to be repaired or replaced.

  If it's just a software issue... the free VLC Media software
  Player may be worth a try... it will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/VLC/
  (works on XP/Vista/7)
  (the name of the file to download is: vlc - 2.0.0 - win32.exe)

• nvlddmkn display driver stops working, how to fix?

  display driver stops working when you play

  Download and install the latest nVIDIA Driver:

  http://www.nvidia.com/download/find.aspx?lang=en-us

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Accelorator Windows driver stopped working

  Occasionally, I have a message that comes up saying Windows accelorator driver stopped working for Windows XP and has recovered. I have Windows 7 Home premium so why would this message keep appearing from time to time.

  I think you mean the error: display driver Intel Graphics Accelerator drivers for Windows XP stopped responding and has recovered

  This means that your graphics driver has stopped working properly.
  You need to update this driver, I guess its GPU from Intel because of the error message for the latest version of the driver can be downloaded from the Intel page so European page driver Toshiba.

• My DVD has stopped working "cannot read DVDs Please decrease the current resolution.

  Original title: DVD

  My DVD has stopped working - error that says: cannot read DVDs Please decrease the current resolution and ensure that the connection of display type is taken care... Help!

  Hello

   
  What program you're using to play the DVD? Mention the name of the program?
   
  Try to play the DVD with Windows Media Player , and let me know if you get an error message.
  Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
   
  Response with more information to help you.